Adition Audio Science and Technology IR125B Users Manual

KEEFIT ACTIVITY TRACKER

Model No.: IR125B

Keefit2

READ THIS INSTRUCTION MANUAL BEFORE OPERATING THE
APPLIANCE AND SAVE IT FOR FUTURE REFERENCE

Instruction Manual

Thank you for purchasing this Tracker
We recommend that you spend some time read this instruction
manual in order that you fully understand all the operational
features it offers. You will also find some hints and tips to help
you resolve any issues.Read all the safety instructions carefully
before use and keep this instruction manual for future reference.

CAUTION
Symbol Definitions
DANGER - Indicates an imminently hazardous situation, which,
if not avoided, will result in death or serious injury. This symbol
appears only in the most extreme situations.
WARNING - Indicates a potentially hazardous situation which
could result in death or serious injury.
CAUTION - Indicates a potentially hazardous situation, which,
if not avoided, may result in minor/moderate injury or product/
property/damage. It also warns against unsafe practices.

The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of insulated ‘dangerous voltage’ within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.

WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT REMOVE COVER
(OR BACK), NO USER SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.

SAFETY INSTRUCTIONS

1) Read this Instruction Manual before you attempt to connect
or operate the appliance.

2) Keep these instructions in good condition. Heed all
warnings. Follow all instructions.

3) Save this Instruction Manual for future reference.

4) The apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the product. Dry location use only.

5) No naked flame source, such as candles, should be placed on
the product.

6) Children should be supervised to ensure that they do not play
with the appliance.

7) Ventilation should not be impeded by covering the ventilation
openings.

8) Only use accessories, which are specified by the
manufacturer.

9) Install the unit in accordance with the manufacturer’s
instructions.

10) Place the unit where there is good ventilation. Place the
system on a flat, hard and stable surface. Do not expose to
temperatures above 40°C. Allow at least 10 cm clearance
from the rear and the top of the unit and 5 cm from each
side.

11) Press the button gently. Pressing them too hard can damage
the button.

12) Dispose of used batteries in an environmental-responsible
manner.

13) Always ensure that the product is unplugged from the
electrical outlet before moving or cleaning. Clean it with dry
cloth only.

14) This product has no user-serviceable parts. Do not attempt
to repair this product yourself. Only qualified service
personnel should perform servicing. Take the product to the
electronics repair shop of your choice for inspection
and repair.

15) NEVER let anyone, especially children, push anything into
holes, slots or any other openings in the unit’s casing as this
could result in a fatal electric shock.

16) Do not leave the unit unattended when it is in use.

FEATURES

Free APP that tracks your sleep, activity & create the charts
for the data compare.
Vibration alerts including Smart Alarm & Activity reminder.
Designed to be worn 24 hours to track user’s activity and
workouts.
Track your sleep and wake up silently with a vibrating alarm.
Remind you to move when you’ve been inactive for a long
time; and vibrating twice.
Motivate you to get your desired goal.
Bluetooth4.0 sync with all the info is collected and stored
in real time.
3 Hour charging time for 5~7days using(the use of time).

Remove all packaging from the unit. Please verify that the
following items are included:

Instruction

Manual

Unit

Instruction Manual

Charging
Cable

Product overview

Charger Direction

USB Port

Power Button

Right Direction

Getting to know your Keefit Activity Tracker

Track your day
Counts your steps, calories burned, distance travelled.
Active minutes
Reminds you to move when you have been inactive for a
long time.

Set daily goals
Motivates you to get your desired goal.
Get fulfilled seeing your progress through graphs.
Track your night
Graphs hours slept, times woken up.
Monitor your sleep quality and wake up silently with a
vibration alarm 24 hours tracking user’s activity
and workouts.

The Display

Turn on

Turn off

Current time

Steps

Calories

Sleep mode

Battery level / charging

Getting Start:

Download the APP

1 2

Download the keeFit2 software supplied USB Charging Cable,

from App store Or Google Play & install

Keepfit2

with your Smart device Turn your Smart

Sync bracelet

3

Device’s Bluetooth on First

After that, press the Power button on the bracelet for 5 seconds
to turn on the bracelet.
Marks: pls kindly be noticed that the display screen of bracelet
must turn on during the BT connection. after connect, the
display will be dark automatically.

Click the Apps icon “
connecting……” will show on the App. after about 30 seconds
Wireless connection is successful when “Bluetooth connection
is successful” appears.

Sync Icon to
connect
device via
Bluetooth

Charge the bracelet by the

firstly,Connect to the charger pin at the
bottom of bracelet and then plug the
USB to the USB port from your
computer or the adaptor with output
power minimum of 5V 500mA or
highter.

” to pair bracelet, then “Bluetooth

Customize your Keefit bracelet

4

Click on to “Setting” & put in your information
Under “My Profile” it is important to record accurate
information to ensure that the reading & outcome will
be more beneficial to the user.

Set your daily workout goals

5

Click “Workout Goal” to set your daily sport goals. Choose
the daily goal listed in the options and click “ok” and Sync.

(iOS system) (Android system)

Reminder Setting Notes

6

Click “Reminder Setting” to set activity reminder function,
for anywhere between 15 minutes and 2 hours, the bracelet
will vibrate to remind you to exercise.

(iOS system)

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received,
including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.

Smart Alarm

7

Click “Smart Alarm” to enter alarm setting interface.
After alarm setting, the bracelet will vibrate several
times as per your desired time, meantime show CLOCK
to wake you up silently. At this moment, Press the Power
button by once to close the clock

(iOS system)

About US

8

Activity Mode

No matter what settings you put or change, you have
to sync the bracelet with your devices via the Bluetooth,
in order to sync the setting done to your unit. Select the
Sports mode Press the button

click toon the bracelet, then sync.

Data Synchronization After Use
The data storage time of the bracelet is 3 days. Please sync your
bracelet within 3 days.

After charging and having the “My profile” setting, you can take
the bracelet on hand and doing exercise, like walking, running.
After you complete the exercise, and get ready for data
synchronization. The unit will calculate the distance of the working
steps, but not including the distance of driving or taking bus.
Press the Button on bracelet in short time, then the LED screen

Click the Bluetooth connecting icon

will light on.
with bracelet, it will show sync Interface, the number of Steps,
Distance, Burn and target goals that have completed will be
showed onside the APP.

to connect

1) In Activity mode, click the button 2 times speedily, shift from

Sleep Mode

sports mode to sleep mode. Bracelet vibrate and show sleep
icon “SLEEP ”

2) In sleep mode you can still check the time. Simply click the
button and time will show.

3) When user wake up in morning, bracelet will detect user’s
sports situation and shift from sleep mode to sport mode
automatically once you are walking around over 15 minutes.

4) After sync. Bracelet with phone, user can review sleep
situation yesterday, or previous sleep situation per day,
month or year.

Sleep
Charts

Notes:

Power management
(1) Press and hold the power button for about the 5 seconds to
ture on/ture off the bracelet.

(2)The bracelet has a built-in（can’t disassemble）3.7V 90mAh
lithium battery for power supply. Before using the device for the
fist time or when the battery has been unused for an extended
period, you must full charge the built in battery then sync with
phone. While charging the screen will indicate a charging symbol.
The button will not respond during the charging process.
Reminder

Please charge the device for at least 3 hours for fully charging.
until you find the battery icon does not flash.
Connecting the bracelet to other power supply or long time
charging may cause damage, any damage caused by misuse is
not covered by the warranty. The working distance between the
Smart phone and the bracelet no longer than 10m in open air.

BT Compatibility :

Apple product with iOS 7.0 or above
iPhone 4S, iPhone 5S, iPhone 5C, iPhone 6, iPhone 6 plus
iPod touch 5th Gen. or newer
iPad Mini, iPad Mini with Retina display
iPad air

Android Smart phone (Android verion 4.3 or above)
Samsung Galaxy S3 , S4 , S5
Samsung Galaxy Note 2, Note 3, Note 4

Other smart phone
To check the Android version, you can press the system icon at
smartphone. To check the BT version of your phone please
contact supplier or check with service personnel.