ADGE MEDIA ADBADGE204TR01 Users Manual

Operation Manual

Product Name: AD BADGE Smart
Model: AD-CM13
Operating temperature：-5-50℃
Current: MAX 50mA
Working voltage: 3.60-5.20V
Battery low voltage: 3.6V
Max power: 260mW

Button Funtion:

Power Button: Keep pushing for 3 second to turn on the device.
Scroll Button: Upward selection
Scroll Button: Downward selection
Menu Button: To confirm the selection
Reset Button: Reset the device

To connection a computer
Connect the device with a computer with USB cable; the device displays below
information after 3 seconds:
“View Photo”
“Manage Photo”
Use the Scroll Button to select “manager Photo”, then push the menu Button,
the device displays “USB Connect” which means the device has connected
with the computer. Double click “My computer” in your computer to find the
device. The device will be displayed as a Local Disk, for example: Local Disk
(I:), it depends on the computer.
Double click the Disk Icon to find and open the folder “AD_BADGE_AD
VIEWER”. Find and double click the Icon “AD_BADGE_AD_ViewerV2.1.9.exe”;

it suggests you to input the p ass word or change the p assword; input p assword
and select ok to enter the “View Image Editor”. Operate the device as per the
instruction, for example, add the pictures, delete the pictures, edit the pictures
and so on.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.