Designed for serious use Low cost Electrical isolation of CAN branches Extension of nodes number Different baud rate of branches CAN Allows extension of a line segment
(without lowering the Baud Rate)
Protocol independent, allowing it to work with all the
different CAN protocols and frame lengths.
Document code: MN67181_ENG Revision 2.101 Page 1 of 13
Page
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
INDEX 2
CHARACTERISTICS 3
EXAMPLES 4
SET SWITCH BAUD RATE 6
CONNECTION SCHEME 7
CAN BUS CABLE CHARACTERISTICS 10
MECHANICAL DIMENSIONS 11
ORDER CODE 12
WARRANTIES AND TECHNICAL SUPPORT 13
RETURN POLICY 13
PRODUCTS AND RELATED DOCUMENTS 13
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that you
need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code” that
appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/ and
search for the corresponding code on the page. Click on the proper “Document
Code” and download the updates.
To obtain the updated documentation for the product that you own, note the
“Document Code” (Abbreviated written "Doc. Code" on the label on the product)
and download the updated from our web site www.adfweb.com/download/
REVISION LIST:
Revision
1.002 16/02/2006
1.005 19/06/2005
1.006 22/06/2007
1.007 26/06/2007
1.100 29/06/2007
2.000 06/07/2007
2.100 03/11/2008
2.101 19/01/2009
WARNING:
ADFweb.com reserves the right to change information in this manual about our
product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective owners.
Document code: MN67181_ENG Revision 2.101 Page 2 of 13
Date Author Chapter
Dp All Revision
Ddt All documentation code changed
Av All Revision
Av All Revision
Av All Enclosure Small
Av All New document format
Document code: MN67181_ENG Revision 2.101 Page 3 of 13
IndustrialElectronic Devices
CHARACTERISTICS:
Resolved your extension line problems.
Ideal for galvanized isolation.
Two-sided programmable baudrate.
Adapted for use in motors and devices with electro-magnetic disturbances.
Adapted as repeaters for the following lines: CANopen, Devicenet, J1939,CAN bus 2.0A, CAN bus 2.0B and generic ISO 11898 standard
The CAN Repeater have 4 order code: HD67117, HD67180, HD67181, HD67182. So they are more proper to a protocol rather than to
another.
The CAN Repeater (for all the order code):
Electrical isolation of two branches of a CAN Line (ISO 11898-1);
Allows extension of a line segment without lowering the Baud rate;
Interconnects two branches of different speeds;
Uses a microprocessor for the organization of data;
Independent Protocol;
Possible different baud rate setting (into different branches);
Mountable on Rail DIN;
Power Supply 24VDC 200mA; 12/18V AC 50/60Hz; 200mA;
Temperature range -30°C to 70°C;
EMS EN 61000-6-2.
Document code: MN67181_ENG Revision 2.101 Page 12 of 13
IndustrialElectronic Devices
ORDER CODES:
HD67117 - Suitable for use with CANopen Protocol (CAN connector: Terminal block)
HD67117M - Suitable for use with CANopen Protocol
HD67117-M12 - Suitable for use with CANopen Protocol (CAN connector: M12)
HD67180 - Suitable for use with DeviceNet Protocol (CAN connector: Terminal block)
HD67180M - Suitable for use with DeviceNet Protocol
HD67180-M12 - Suitable for use with DeviceNet Protocol (CAN connector: M12)
HD67181 - Suitable for use with CAN 2.0A and 2.0B Protocol (CAN connector: Terminal block)
HD67181M - Suitable for use with CAN 2.0A and 2.0B Protocol
HD67181-M12 - Suitable for use with CAN 2.0A and 2.0B Protocol (CAN connector: M12)
HD67182 - Suitable for use with J1939 Protocol (CAN connector: Terminal block)
HD67182M - Suitable for use with J1939 Protocol
HD67182-M12 - Suitable for use with J1939 Protocol (CAN connector: M12)
Document code: MN67181_ENG Revision 2.101 Page 13 of 13
IndustrialElectronic Devices
WARRANTIES AND TECHNICAL SUPPORT:
For fast and easy technical support for your ADFweb.com SRL products, consult our internet support at www.adfweb.com.
Otherwise contact us at the address support@adfweb.com
RETURN POLICY:
If while using your product you have any problem and you wish to exchange or repair it, please do the following:
1) Obtain a Product Return Number (PRN) from our internet support at www.adfweb.com. Together with the request, you need to provide detailed information about the
problem.
2) Send the product to the address provided with the PRN, having prepaid the shipping costs (shipment costs billed to us will not be accepted).
If the product is within the warranty of twelve months, it will be repaired or exchanged and returned within three weeks. If the product is no longer under warranty, you will receive
a repair estimate.