Daikin North America LLC and Honeywell have jointly developed an
organically integrated system which allows Honeywell’s INNCOM
Integrated Room Automation system to provide direct digital control of
the Daikin Variable Refrigerant Volume (VRV) heat recovery system.
This is an industry first solution that provides the hotelier an intelligent
integrated room automation system capable of connecting all of the
guestroom devices to control room temperature, lighting drapes and
amenities, in-room 3rd party integration of door locks, as well as connect
to the INNcontrol 3 software on a central server over the Deep Mesh
Network, with the efficiency of Daikins VRV system.
Part #DD15 Installation Instructions 6/30/2016
1
Specification
Part #DD15
Features
A seamless energy management solution, with integrated VRV
capability tailored specifically for hospitality
Provides a more energy efficient solution with lower operating
costs than traditional FCU systems
Maximizes dehumidification capability, and significantly reduces
mechanical noise over traditional FCU systems
In-room 2.4Ghz RF wireless network communications
Software control of the field settings for the Daikin VRV in door
unit (IDU)
Error reporting from the Daikin system to the INNcontrol 3
application on the central server
Over-the-air loadable for easy installation, commissioning, and
maintenance
Ideal for new installation and retrofit
Compact interface module
Best-in-class offerings from Honeywell and Daikin
Parameter Specification
Input Voltage (P4) 16VDC
DC Output (P3) 12V, 30mA (50mA Peak)
Current Consumption
Bind Switch Recessed switch used for commissioning and binding (S1)
Indicator LED’s
Communications
Dimensions 84.5mm (L) x 47mm (W) x 29mm (H)
Maximum Operating Temperature (0°C to 40°C)
Maximum Storage Temperature -40°C – 70°C
Relative Humidity 5 – 90%RH Non-Condensing
Approvals
Typical 100mA. See the DD15 Digital Output section for application
specific current consumption.
Diagnostic LED (green), Transmit activity (Yellow), Receive activity
(Red)
S5bus for wired bus communication, 2.4Ghz wireless RF Transceiver for
Deep Mesh RF communication
FCC 47CFR PT 15.247 Issued:2004/10/01 Operation within the bands
902-928MHz, 2400-2483.5MHz and 5725-5850MHz
RSS-247 Issue: 2015/05/22 Issue 1 Digital Transmission Systems
(DTSs), Frequency Hopping Systems (FHSs) and License-Exempt
Local Area Network (LE-LAN) Devices
FCC 47CFR PT 15 SPT B Issued:2013/01/28 Title 47 CFR Part 15
Subpart B: Unintentional Radiators
ICES 003 Issued: 2012/08/01 Spectrum Management and
Telecommunications Interference-Causing Equipment Standard
EN 300 328:2015 V1.9.1 EMC & Radio Spectrum Matters (ERM);
Wideband Transmission Systems Data Transmission Equipment
Operating in the 2.4GHz ISM Band & Using Wide Band Modulation
Techniques Harmonized EN for Article 3.2- R&TTE Directive
Part #DD15 Installation Instructions 6/30/2016 2
Parameter Specification
EN 300 489-1 V1.9.2 Electromagnetic compatibility and Radio spectrum
Matters (ERM); Electromagnetic compatibility (EMC) standard for radio
equipment and services; Part 1: Common technical requirements
EN 301 489-17 Electromagnetic compatibility and radio spectrum
matters (ERM); Electromagnetic Compatibility (EMC) standard for radio
equipment; Part 17: Specific Conditions for broadband data
transmission systems –V2.1.1
N 55022 Issue:2010/12/01 Information Technology Equipment-Radio
Disturbance Characteristics – Limits and Methods of Measurement,
Includes COR 2011/10/01
EN 55024 Issue: 2010/11/01 Information Technology Equipment –
Immunity Characteristics Limits and Methods of Measurement.
Safety
Precautions
The following safety precautions should be observed during the
installation start-up to prevent personal injury or equipment damage:
Observe national and local electrical codes.
Observe voltage and current limits marked on the DD15
Observe voltage and current limits and rating when wiring to the
Daikin VRV IDU and X18A/X35A terminal boards
Assumption is that the installer has a working knowledge of the
INNCOM system
Replacing Legacy
Device
A single DD15 replaces the legacy solution of a RTD-LCINC and a PC485, which provided the integration between Daikin VRV and the
INNCOM by Honeywell system.
Shutting down power to the Daikin VRV unit will be required when
disconnecting the RTD-LCINC and the PC-485. Follow the wiring
instructions section when installing the DD15.
Part #DD15
NOTE:
The form factor of the DD15 allows for a different mounting
application.
Part #DD15 Installation Instructions 6/30/2016
3
System Overview
Part #DD15
Figure 1 Standard VRV Integration Overview
Honeywell’s INNCOM e528 or e527 thermostat replaces the standard
Daikin VRV room controller for the heat recovery system. Daikin’s heat
recovery solution provides an alternative to a chiller plant and is
becoming more widely accepted in the hospitality market. The e528 or
e527 thermostat is the “intelligent” device capable of linking ancillary
sensors and serving as an information gateway. For example, coupled
with a magnetic door switch (wired or wireless), motion detectors and
other devices, the e528 or e527 thermostat becomes the center of a
highly effective Energy Management System application,
communicating EMS information requirements from the guestroom to
the central server. When connected to the INNcontrol server over a wired
or wireless backhaul network, a centrally controlled EMS package is
created. Through interfaces with other devices and sensors, the solution
provides the following functions:
Central Electronic Lock
Humidity Management
Outside temperature display
Peak demand load shedding
Property/Building Management System (PMS/BMS) interface
The DD15 interface module is equipped with a 2.4 GHz wireless RF
transceiver for Deep Mesh RF communications. This provides the
capability to wirelessly communicate to Honeywell’s INNCOM e528 or
e527 thermostat. This additionally provides the capability to wirelessly
over-the-air load the device for software updates and configuration
changes.
NOTE:
The DD15 is not intended to be used as a general purpose RF
media gateway or protocol converter.
Parameter Specification
RF Data Rate 250kbps
Antenna Type SMT
Indoor Range 100ft
Outdoor/ RF line-of-sight
range
Transmit Power 10mW (+18dBm)
Receive Sensitivity -94.6dBm
Frequency Band 2.4Ghz
Encryption AES-128
Protocol 802.15.4
Frequency Channels 11-26
Table 1 Deep Mesh RF Radio Attributes
1000ft+
Part #DD15 Installation Instructions 6/30/2016
5
Part #DD15
Figure 2 Typical Wireless Installation
Part #DD15 Installation Instructions 6/30/2016
6
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.