Ademco 8DLTUXEDOW User Manual

TTTT

UUUU

XXXX

EEEE

DDDD

OOOO

WWWW

HHHH

oooo

mmmm

eeee

AAAA

uuuu

tttt

oooo

mmmm

aaaa

tttt

iiii

oooo

nnnn

aaaa

nnnn

dddd

SSSS

eeee

cccc

uuuu

rrrr

iiii

tttt

yyyy

SSSS

yyyy

ssss

tttt

eeee

mmmm

POWER / RESET BUTTON

GREEN

• Ready To ARM

RED

• System Armed

• System Alarm

BLANK (No LED lit)

• Not Ready to Arm

• Alarm Silenced (Alarm Memory)

tuxedow-0 02-V0

AM

1:0 0

Devic es

Secu rity

Mul time dia

Saturday, January 28, 2012

Not Ready

P1 H

1:00 AM

N/A

ARM AWAY

ARM STAY

ARM NI GHT

DIS ARM

Z

Z

1

4 5 6

7 809

2 3

Brightness

Volume

W

eather Forecast

TTTT

UUUU

XXXX

EEEE

DDDD

OOOO

WWWW

HHHH

oooo

mmmm

eeee

AAAA

uuuu

tttt

oooo

mmmm

aaaa

tttt

iiii

oooo

nnnn

aaaa

nnnn

dddd

SSSS

eeee

cccc

uuuu

rrrr

iiii

tttt

yyyy

SSSS

yyyy

ssss

tttt

eeee

mmmm

Quick User Setup Guide

For additional information see the full User Guide [Part Number 800-25177 or higher] available online at: https://mywebtech.honeywellhome.com
The TUXEDOW Touchscreen combines control of your home security system and home automation.

Your Home/Security screen is the gateway to your System.
From this screen, you can:

• control your security system

• control your multi-media applications such as videos and pictures

• control home automation such as lighting, thermostat, door locks

and water valves.
Your Home screen is displayed most of the time and can be
customized via the Multimedia application.

Select

to access the Introduction and Training

The Weather forecast is displayed on the Home screen. To set the weather forecast for a specific location,
select the Weather feature. Select Region USA, Canada or Others. Select Zip Code and enter the

information on the data entry keyboard and select . Note: The Weather option must be enabled.

The TUXEDOW Touchscreen can show displays in one of three languages with the default being English. To change the language, select the Setup → and Disp & Audio
Setup → icons and enter your Authorized Code (if required) and then select from English, French Canadian, and Latin American Spanish.

ARMING THE SYSTEM

From the Home Screen:

You can arm the system in one of three arming modes: Away, Stay, and Night. Select
the Security icon.

AWAY – Select to arm
when no one is staying on
the premises.

IMPORTANT: If you return to your home or business and the main burglary sounder
is on, DO NOT enter the premises, but call the police from a nearby safe location. If
you return to your home or business after an alarm has occurred and the main
sounder has shut itself off, the Touchscreen beeps rapidly upon entering, indicating
that an alarm has occurred during your absence. LEAVE IMMEDIATELY and

CONTACT THE POLICE from a nearby safe location.

To disarm the system when already in the premises: select the Disarm icon

To disarm the system when entering the premises: enter your 4-digit user code.

DISARMING THE SYSTEM AND SILENCING ALARMS

To silence Alarms or Trouble conditions: enter your 4-digit user code, select the
Clear button, then enter your 4-digit user code again.

To test the Alarm, select the Security and More Choices icons.

-Select Console Mode and refer to Control Panel User Guide for procedure.

EMERGENCY MESSAGES

An emergency message for fire, police, or medical can be sent to the central
monitoring station from the Emergency screen. Select the PANIC icon (located in
the lower left corner of the screen). Select and hold (for at least 2 seconds) the
associated alarm icon.

Home Screen

Select the Security icon .

STAY - Select to arm

when you are staying
home, but might expect
someone to use the
entrance door later.

and enter your 4-digit user code.

Videos.

Touchscreen Reset: To reset the Touchscreen, press and hold the side Power Button for

3 seconds and then select the “Press here to Reset” message on the screen to start the
reset function. The Touchscreen can also be reset by pressing and holding the reset
button for approximately15 seconds until the touchscreen resets automatically.

Operating Modes

Select the Setup and Disp & Audio icons.

NIGHT - Select to arm

when you are staying
home and do not expect
anyone to use the
entrance door.

1. Enter an Authorized Code.

Select the desired Operating Mode: Chime Mode or Voice Mode.
Select a Language: English / French / Spanish.

- Select “Backllight off After” to select the time increment for the backlight to be lit.

- Select “To Homepage After” to select the time increment for the homepage to be
displayed.

- Select “Auto Slideshow After” to select the time increment for viewing photos.

Select a Fahrenheit (°F) or Celsius (°C).

- Select Apply when done or select the Back arrow to return to previous screen.

Wi-Fi Setup

Select the System Wi-Fi icon and select a Wi-Fi network from the list to connect

to. Or, select to add the required information and manually connect to the network,
and select Connect. Or select cancel.

Select the System Info icon to obtain the IP Address.

AUTOMATION - Devices

First install the device according to the manufacturer’s instructions.

Select the Devices and Scene icons. Enter the required device information on
the Z-Wave Device Management screen. Select Add, Edit or Delete to manage devices.

Select the Setup
ADD DEVICE, REMOVE DEVICE, ABORT OPERATION, REMOVE FAILED, DEVICE

SETUP, DEVICE SEARCH. Select the More icon for more options.

See the Full User Guide “Automation Section” for more information.

ICON DESCRIPTIONS

ICON ICON TITLE/FUNCTION

icon to enter required Z-Wave information and to access options to

PANIC

SECURITY

From the Home Screen: Select the Security icon .

SETUP

Select the Setup and System Setup icon .

Select the System Info icon .

1. View the latest Software Version, Interface name and MAC Address.

Select the Setup and System Setup icon .

1. Select the Time and Date icon .

2. Enter an Authorized Code.

b) Or, use the slide bar to set the time/date from the Set Time/Date screen.

3. Select to save: A message displays “Time Setting Confirmation”, select

Select the CS Setup icon .

1. Enter an Authorized Code to access ECP Address, Options, Screen Security,

2. Select the Back arrow to return to the previous screen.

Select the User icon .

1. Select to add a User name and enter an Authorized Code for this user.

- Select to save User information or select the Back arrow to return to the

Select the Advanced icon .

1. Enter an Authorized Code to access: Power Mode Setup / Night Setup

- Power Mode Setup: Select the desired power save mode (Turn-off Network /

- Night Setup: Select the desired night setup mode (Away / Stay / Instant /

- Keypad Reset: Processor reset; select OK or Cancel.

a) If Get Time is selected, the Touchscreen downloads the time/date from the

control panel and exits the “Set Time” screen.

Yes or No.

Device Events, Code Authority and Panel Config and enter the appropriate

information for each.

previous screen.

/ Keypad Reset .

Override Display Settings).

Maximum / Night).

SILENT PANIC FIRE

POLICE

MEDICAL

“Home” - Returns you to the Home screen.

"Security”- Arm the system and access the three arming modes.

“Setup” - Accesses System Info, System Setup, System Wi-Fi, Disp &
Audio Setup and Brightness / Volume.

“Devices” - Accesses automation features.

“Setup” - Accesses the Z-Wave Device Management screen.

“Scene”- Access the Z-Wave Device Management screen.

“Multimedia” - Accesses Videos and Images.

“Wi-Fi” - Accesses Wi-FI setup options.

“Disp & Audio Setup” – Accesses Operating Modes, Language, Backlight,
Homepage and Slideshow options.

“Authorized Code” - Enter 4-digit authorized code.

Adjusts the Touchscreens Brightness and Volume.

“More”- Access more device automation options.

NOTE: If the TUXEDOW touchscreen is defaulted, it will cause Z-Wave modules to default.

1

1 2

from

MULTIMEDIA

Picture Setup: Insert a media card (Micro SD/SDHC) with up to 1000 stored (jpg, .bmp, .png or
.jpeg) photos.

1. Select the Multimedia → Picture icons; then select the Picture folder to view.

2. Select a photo and select Play to view pictures in a slide show format.

3. To set a picture as wallpaper, select the Default/Wallpaper folder to activate the wallpaper

setting.

4. Select the Picture Info icon to view picture information.

5. Select Back to return to the previous screen.
Video Setup: Insert a media card (Micro SD/SDHC) with stored (avi, .ts, .mpg, .mp4, .mov,
.mkv, or .flv) video files.

1. Select the Multimedia → Picture icons; then select the Video folder to view.

2. Select Play to start the selected video file.

3. Select the icon to view video information.

TROUBLE ICONS

The Security screen also displays an Icon(s) if a system trouble(s) occurs. If a
Trouble Icon is shown, contact your alarm company.

CARE AND MAINTENANCE

Routine Care

Treat the components of your security system as you would any other electrical
equipment. Do not slam sensor-protected doors or windows.
Keep dust from accumulating on the keypad and all protective sensors, particularly
on motion sensors and smoke detectors.
Keypad case and sensors should be carefully dusted with a dry soft cloth. Do not

spray water or any other fluid on the units.

Clean Screen

With the exception of normal cleaning, the keypad is maintenance free.

1. Select the Setup and the Disp & Audio Setup icons.

2. Enter your “Authorized Code", if required.

3. Select the CLEAN SCREEN button to disable the keypad for 26 seconds.

4. Select Continue to disable the touchscreen.

5. Select Cancel to exit.

Note: The product should not be disposed of with other household waste. Check for the

nearest authorized collection centers or authorized recyclers. The correct disposal of end-of­life equipment will help prevent potential negative consequences for the environment and
human health.

I S E D R F E x p o s u r e S ta t e m en t

This device complies with ISED RSS-102 RF exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the IC RSS-102 RF exposure
limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal
operation.

Cet appareil est conforme aux limites d'exposition aux rayonnements de la CNR-102
définies pour un environnement non contrôlé. Afin d'éviter la possibilité de dépasser les
limites d'exposition aux fréquences radio de la CNR-102, la proximité humaine à l'antenne
ne doit pas être inférieure à 20 cm (8 pouces) pendant le fonctionnement normal.

Warning: 5G Band 5150-5250MHz is only for indoor use.
Avertissement: la bande 5G 5150-5250 MHz est uniquement destinée à une utilisation en

intérieur.

1. Limited Warranty.
a. General

Subject to the terms and conditions of this Limited Warranty and except as provided in Section 1(b), Seller warrants its products to be free from defects in materials and workmanship under normal use and service, normal wear and tear excepted, for 24 months from the
manufacture date code; provided, however, that in the event the Buyer presents a proper invoice relating to the purchased product and such invoice bears a date later than the manufacture date, then Seller may at its discretion, reflect the warranty period as
commencing at invoice date. Except as required by law, this Limited Warranty is only made to Buyer and may not be transferred to any third party.
Seller shall have no obligation under this Limited Warranty or otherwise if:
(i) The product is improperly installed, applied or maintained;
(ii) Installed outside of stated operating parameters, altered or improperly serviced or repaired by anyone other than the Seller/Seller’s Authorized Service/Repair Center;
(iii) Damage is caused by outside natural occurrences, such as lightning, power surges, fire, floods, acts of nature, or the like.
In addition, this Limited Warranty shall not apply to:
(iv) Defects resulting from unauthorized modification, misuse, vandalism, alterations of serial numbers, other causes unrelated to defective materials or workmanship, or failures related to batteries of any type used in connection with the products sold hereunder.
Non-Seller branded products are warranted by the third party manufacturer for a period as defined by the third party manufacturer. Seller assigns to the Buyer those warranties and only those warranties extended by such third party manufacturers or vendors for non­Seller branded products. Seller does not itself warrant any non-Seller branded product an sells only on an as is basis.

b. Exceptions to Warranty With Respect to Resideo Manufactured Products listed below:

Hardwire Contacts - Seller warrants parts for Hardwire Contacts in accordance with the terms of the above limited warranty for a period of five (5) years from the manufacture date code.
Hardwire PIRs - Seller warrants parts for Hardwire PIRs in accordance with the terms of the above limited warranty for a period of five (5) years from the manufacture date code.
Mobile Internet Device (tablet) – Seller warrants the Mobile Internet Device (tablet) in accordance with the terms of the above limited warranty for a period of one (1) year from date of purchase.

2. EXCLUSION OF WARRANTIES, LIMITATION OF LIABILITY

THERE ARE NO WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. TO THE FULL
EXTENT PERMITTED BY LAW, IN NO CASE SHALL SELLER BE LIABLE TO ANYONE FOR ANY (i) CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE PRODUCT AND/OR
FOR BREACH OF THIS OR ANY OTHER WARRANTY OR CONDITION, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY SELLER’S OWN NEGLIGENCE OR FAULT AND
EVEN IF SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES. Any product description (whether in writing or made orally by Seller or Seller’s agents), specifications, samples, models, bulletin, drawings, diagrams, engineering
sheets, or similar materials used in connection with the Buyer’s order are for the sole purpose of identifying the Seller’s products and shall not be construed as an express warranty or condition. Any suggestions by Seller or Seller’s agents regarding use, applications, or
suitability of the products shall not be construed as an express warranty or condition unless confirmed to be such in writing by Seller. Seller does not represent that the products it sells may not be compromised or circumvented; that the products will prevent any
personal injury or property loss by burglary, robbery, fire or otherwise, or that the products will in all cases provide adequate warning or protection. Buyer understands and will cause its customer to understand that a properly installed and maintained alarm may only
reduce the risk of a burglary, robbery or fire without warning, but it is not insurance or a guarantee that such will not occur or will not cause or lead to personal injury or property loss. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL
INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON ANY CLAIM AT ALL INCLUDING A CLAIM THE PRODUCT FAILED TO GIVE WARNING. However, if Seller is held liable whether directly or indirectly for any loss or damage with respect to the products
it sells, regardless of cause or origin, its maximum liability shall not in any case exceed the purchase price of the product, which shall be fixed as liquidated damages and not as a penalty, and shall be the complete and exclusive remedy against the Seller.

3. Limitation on Liability to Buyer's Customers.

Buyer agrees to limit liability to its customers to the fullest extent permitted by law. Buyer acknowledges that Seller shall only be deemed to give consumers of its products such statutory warranties as may be required by law and at no time shall Buyer represent to its
customers and/or users of the Seller’s products that Seller provides any additional warranties. By accepting the products, to the fullest extent permitted by law, Buyer assumes all liability for, and agrees to indemnify and hold Seller harmless against and defend Seller
from, any and all suits, claims, demands, causes of action and judgments relating to damages, whether for personal injury or to personal property, suffered by any person, firm, corporation or business association, including but not limited to, Buyer's customers and/or
users of the products because of any failure of the products to detect and/or warn of the danger for which the goods were designed or any other failure of the products whether or not such damages are caused or contributed to by the sole or joint concurring negligence
or fault of Seller.

4. Returns and Repairs.

Subject to the terms and conditions listed below, during the applicable warranty period, Seller will repair or replace, at its sole option, free of charge any defective products returned prepaid. Seller reserves the right to replace any defective product under warranty with
new, refurbished or remanufactured product. In the event you have a problem with any Seller product, please call and request a RETURN MERCHANDISE AUTHORIZATION (RMA) NUMBER from the Service Department.
In the USA call 800-573-0154.
Shipping Address: Resideo Security Service Center, 12220 Rojas Drive, Suite 700, El Paso, TX 79936
Be sure to have the model number, serial number, and the nature of the problem available for the customer service representative. Prior authorization MUST be obtained for all returns, exchanges, or credits. ITEMS SHIPPED TO SELLER WITHOUT A CLEARLY
IDENTIFIED RMA NUMBER MAY BE REFUSED.
Products returned will be tested to verify the defect. Upon verification of the defect, the product will be repaired, exchanged, or credited to Buyer’s account, at the sole discretion of Seller. In the event of replacement, the returned product will be credited to Buyer’s
account and a new invoice issued for the replacement item. Seller reserves the right to issue a credit only in lieu of replacement. If the product is found to be in good working order or its inability to function properly is a result of user damage or abuse, the product will
be returned in the same condition as received unless repair is possible and requested by Buyer and in each case, freight charges will be the responsibility of the Buyer. Repairs of such nature will incur a charge for parts and labor and will proceed only by agreement
with Buyer to accept the charge.
Non-Warranty Repair - Buyer will be charged for repairs on out of warranty product. Applicable charges will be calculated and quoted when an RMA number is issued. Charges may vary based on actual product condition. For all non-warranty repairs Buyer will be billed
for all parts, labor and shipping costs. Non-warranty repairs are warranted for 90 days from date of repair.
Return for Credit Unused Product - At its option, Seller may accept as a return for credit unused product in its original package and in a condition that could be sold as new provided the product was purchased from Seller no more than thirty (30) days prior to the date of
return. Buyer must provide proof of purchase within the preceding thirty (30) days and method of payment. Returns must include all original instructions and packaging within the original box. Special order items are non-returnable (unless otherwise specified by Seller).
All returns are subject to a fifteen percent (15%) restocking fee. For non-returnable items, no return privileges apply. Buyer must contact Customer Service and obtain a Return Authorization for Credit (RAC) number. Unauthorized returns are not accepted and will be
returned freight collect.
Bad-Out-of-Box Replacement - For products sold through distribution, Resideo will provide the following privileges solely to its direct distributor buyer: Buyer may return a product deemed to be defective within 180 days from the manufacture date code for credit or a
replacement product. If the product is found to be in good working order or if the damage or defect is not covered by the scope of the sellers warranty in section 1 above, the product will either be: (i) returned in the same condition as received or (ii) processed as per
Buyer’s request, and in either event, the freight charges will be the responsibility of the Buyer.

5. Governing Law - If the Buyer acquires the Seller’s product in the United States of America, the laws of the State of New York apply to this Limited Warranty.

6. Miscellaneous - Where any term of this Limited Warranty is prohibited by such laws, it shall be null and void, but the remainder of the Limited Warranty shall remain in full force and effect.

SUPPORT & WARRANTY

For the latest warranty information, please go to:
https://www.security.honeywellhome.com/hsc/resources/wa/index.html
For patent information, see https://www.resideo.com/patent

SUPPORT: For technical support, call 1-800-645-7492 M-F 8:30am to 5pm EST

Two Year Limited Warranty

2 Corporate Center Drive, Suite 100

P.O. Box 9040, Melville, NY 11747
© 2019 Resideo Technologies, Inc

FEDERAL COMMUNICATIONS COMMISSION & ISED STATMENTS

The user shall not make any changes or modifications to the equipment unless authorized by the Installation
Instructions or User's Manual. Unauthorized changes or modifications could void the user's authority to operate
the equipment.

FCC CLASS B STATEMENT

This equipment has been tested to FCC requirements and has been found acceptable for use. The FCC requires
the following statement for your information:
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict
accordance with the manufacturer's instructions, may cause interference to radio and television reception. It has
been type tested and found to comply with the limits for a Class B computing device in accordance with the
specifications in Part 15 of FCC Rules, which are designed to provide reasonable protection against such
interference in a residential installation. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

•If using an indoor antenna, have a quality outdoor antenna installed.

•Reorient the receiving antenna until interference is reduced or eliminated.

•Move the radio or television receiver away from the receiver/control.

•Move the antenna leads away from any wire runs to the receiver/control.

•Plug the receiver/control into a different outlet so that it and the radio or television receiver are on different branch
circuits.

•Consult the dealer or an experienced radio/TV technician for help.

INDUSTRY CANADA CLASS B STATEMENT

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC / IC STATEMENT

This device complies with Part 15 of the FCC Rules, and ISED’s license-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference (2) This device must accept any
interference received, including interference that may cause undesired operation.
Cet appareil est conforme à la partie 15 des règles de la FCC et exempt de licence RSS d’ISED. Son
fonctionnement est soumis aux conditions suivantes: (1) Cet appareil ne doit pas causer d' interferences nuisibles.
(2) Cet appareil doit accepter toute interference reçue y compris les interferences causant une reception

indésirable.
Responsible Party / Issuer of Supplier’s Declaration of Conformity: Honeywell International, 2 Corporate Center Dr.,
Melville, NY 11747, Ph: 516-577-2000.

FIRE AND CARBON MONOXIDE ALARM OPERATION

Your fire alarm system and carbon monoxide detector (if installed) is on 24 hours a day, providing
continuous protection. In the event of an emergency, the installed smoke, heat, carbon monoxide
detectors automatically send signals to your Control/Communicator, triggering a loud interrupted sound
from the Touchscreen An interrupted sound is also produced by optional exterior sounders.
EVACUATE ALL OCCUPANTS FROM THE PREMISES IMMEDIATELY. Notify your Central
Station/Security Company immediately and wait for further instructions.

Wi-Fi® and the Wi-Fi logo are registered trademarks of Wi-Fi Alliance.

The TUXEDOW Touchscreen must be installed to provide a separation distance of at least

7.8 in. (20 cm) from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter except in accordance with FCC multi-transmitter
product procedures.

!

Exposition aux Fréquences Radio: L'antenne (s) utilisée pour cet émetteur doit être
installée à une distance de séparation d'au moins 7,8 pouces (20 cm) de toutes les
personnes.

UL Notes:

• Medical functionality has not been evaluated by UL and may not be used in UL Listed applications.

• Remote arming/disarming/programming is not to be used in UL Listed Installations.

•

Multimedia functionality is supplementary only and has not been evaluated by UL.

• Access control functionality has not been evaluated by UL and may not be used in UL Listed
applications.

• Web Server/Hosting is not Listed for use in UL installations.

• Z-Wave applications have not been evaluated by UL.

• Camera functionality is supplementary only and has not been evaluated by UL.

• The maximum time delay setting that can be used with this keypad is 15 seconds.

• Connect only keypads to: Aux. + / Aux. - and Data input / Data output.

www.resideo.com

RF EXPOSURE WARNING

Mise en Garde

This product manufactured by Resideo and its affiliates.
The Honeywell Home Trademark is used under license from
Honeywell International Inc.

Ê800-25175IŠ

800-25175 4/19 Rev. A