Addonics Technologies ZSNA256EU, ZSNAES256 User Manual

T E C H N O L O G I E S

User Guide

Cipher Z-Drive Cartridge System

(ZSNAES256 / ZSNA256EU)

www.addonics.com

v3.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/

Open

Lock

Front

Power LED

Lever / Handle

Lock Mechanism

Drive Activity LED

To open the front panel and insert HD:

1. Using the key provided, place the lock mechanism in the Open position.

2. Pull the lever towards you. This will open the front panel.

3. Slide the 3.5” SATA drive into the tray.

4. Push the front panel to slide the SATA drive into the tray. You will hear a clicking
sound indicating the front panel is closed.

5. Use the key to place the lock mechanism in the Lock position. This will secure the
drive and also turn on the power.

Power LED: Once the lock mechanism is place on the Lock position, the LED will turn
on. As long as it is on the Lock position, the blue LED is on.

Drive Activity LED: The blue LED will blink if there is activity on the drive.

* Serial ATA hot swap feature works only for controllers with hot swap support. You
may consider adding one of the Addonics Serial ATA host controllers to your systems
to ensure the hot swap capability. New controllers from Intel and other suppliers may
support this feature. Please verify with your controller manufacturer if you need to have
hot swap in your application.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/