Addonics Technologies ZSAES256EU, ZESAES256 User Manual

T E C H N O L O G I E S

User Guide

Cipher Z-Drive Enclosure

(ZESAES256 / ZSAES256EU)

www.addonics.com

v3.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/

Front

Removable
Cover

Power and Drive
Activity LED

Removing the front panel:

You can remove the front panel of the enclosure to access the drive drawer of the SATA
drive.

Secure

Hard drive installation:

1. Loosen the two screws from the rear

Drive
Here

panel. Pull out the interior tray from the
enclosure.

2. Connect the 15-pin SATA power cable
to the power connector of the hard drive.
Also connect the 7-pin SATA data cable to
SATA port of the hard drive.

eSATA

(to host)

CipherChain

PWR

Cipher

HDD

RESET

Screws

3. Use the enclosed screws to secure the
hard drive to the tray.

4. After the hard drive is installed, slide the

Connect to
SATA Drive

tray back into the enclosure and then
fasten the two screws properly.

4-pin Floppy
Power Connection

CipherChain

Cipher

RESET

HDD

PWR

eSATA

(to host)

Cipher Key

Connect to eSATA Host

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/