Addonics Technologies CA256USB User Manual

T E C H N O L O G I E S

User Guide

CipherUSB

(CA256USB)

www.addonics.com

v3.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/

Initial Setup

This procedure only needs to be done when setting up the
CipherUSB for the first time, or when a new password is desired.
The CipherUSB will retain the last password it was programmed
with and otherwise does not require any driver or software to
work.

1. Connect the CipherUSB to a computer running Windows, and
connect a USB storage device into the CipherUSB. The
CipherUSB will not respond until a working storage device is
connected to its USB device port.

2. Run the program CipherUSB.exe. The following dialog box
should appear:

3. Click OK to proceed to the utility. Choose a password as short
or as long (up to 32 characters) as desired, and enter it into the
“Setup” and “Confirm” fields. Then click Start.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/