Addonics Technologies AESNAPMRI, AESNAPMRSA, AESNAPMRSI, AESNAPMRU2 User Manual

T E C H N O L O G I E S

User Guide

Snap-In SATA Mobile Rack

(AESNAPMRSA / AESNAPMRI / AESNAPMRSI / AESNAPMRU2)

www.addonics.com

v5.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/

Locking Mechanism: Acts as a power switch for the snap-in mobile rack and also

locks the front panel.

To turn on power and secure the hard drive to the enclosure, use the keys
provided to turn the locking mechanism located on the front panel to Lock position.

AESNAPMRSA

Installation: For power, plug-in

either the 4-pin Molex power
connector or the 15-pin SATA power
connector. Connect the Serial ATA
cable for data connection.

AESNAPMRI

Installation: For power, plug-in the

4-pin floppy power connector of the Y
power cable that came with the SATA
to IDE adapter. Connect the 40-pin
IDE ribbon cable for data connection.

AESNAPMRSI

Installation: For power, plug-in the

4-pin floppy power connector of the Y
power cable that came with the SATA
to SCSI adapter. Connect the 68-pin
SCSI cable for data connection.

AESNAPMRU2

Installation: For power, plug-in the

4-pin floppy power connector of the Y
power cable that came with the SATA
to USB2.0 adapter. Connect the
USB 5-pin header for data
connection.