Addonics Technologies AEPDDESUWP-X, AEPDDESUWP, AEPDDESU User Manual

Page 1
User Guide
Pocket eSATA/USB DigiDrive
(AEPDDESU, AEPDDESUWP, AEPDDESUWP-X)
www.addonics.com
v7.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/
Page 2
Hot Swap
Icon appears only
Flash media is
added or removed
Non hot swap
Icon appears only
Flash media
Device Manager
Drive icon
Media Detection
Hot Swap eSATA port
NOT RECOMMENDED DigiDrive
added or remove
Mini USB port
Mode switch (M1 or M2)
eSATA port 5V power connector
Mode Switch:
Note: Only applies on eSATA connection
I. Setting up the device in eSATA mode
a. Connect USB power cable from PC to the eSATA /
USB DigiDrive.
b. Attach eSATA cable from eSATA / USB DigiDrive
to the PC eSATA port.
The tables show drive icon and media detection behavior basing on the mode switch setting and the type of eSATA port the eSATA / USB DigiDrive is connected to.
M1 mode – force flash media to become Fixed disk
type
Drive icon Media Detection
eSATA port
when flash media is inside
automatically refresh and detected when
eSATA port
M2 mode – force flash media to become Removable
disk type
Non hot swap eSATA port
www.addonics.com Technical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
when flash media is inside
Icon always there with or without flash media inside the
detection requires manual refresh in
Flash media automatically detected when
Page 3
II. Setting up the device in USB Mode
a. Attach mini USB cable from eSATA / USB
DigiDrive to USB port on PC.
b. The drive icon appears only when flash media is
inside the eSATA / USB
DigiDrive.The drive icon
will disappear and reappear during media change.
Note for AEPDDESUWP: If an unformatted flash media is use, no drive icon will show up in My Computer.
Note for AEPDDESUWP-X: If an unformatted flash media is use, no drive icon will show up in My Computer.
Media Priority
When more than one media is inside the eSATA / USB DigiDrive during bootup, the media that gets detected first is according t
o the priority shown below
1. Compact Flash
2.
Smart Media / xD Picture card
3.
MMC / SD
4.
Memory Stick
Note: If both eSATA and USB cables are plug­in, the eSATA connection takes priority.
www.addonics.com Technical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Page 4
CONTACT US
www.addonics.com
Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/
Loading...