Addonics Technologies AE6CAHI, AE6CFHI User Manual
T E C H N O L O G I E S
User Guide
CF or CFast Drive
(AE6CFHI / AE6CAHI)
www.addonics.com
v3.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
Top Cover Screws
Removing Cover of CF / CFAST Drive
To remove the top cover of the CF / CFast Drive, loosen the 4 screws located at the
side of the device using a Philips screwdriver by turning counter-clockwise.
Separate the metal casing of the drive from the housing by lifting up the casing.
Installing CF / CFAST cards into the CF Drive
Slide the CF card into each of the slot on the CF / CFAST Drive.
Note: It is recommended to fill up the CF / CFAST Drive with CF / CFAST cards
from top to bottom, left to right. This is to help in identifying which cards connect to
which ports for easier troubleshooting.
www.addonics.com Technical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
RAID Setting Button
Dip Switch
SATA Host Port (Port 5)
SATA Port 2
SATA Port 1
Floppy
Power
Connector
SATA Port 4
Drive activity LED Jumper Block (J1)
Error LED Jumper Block (J3)
Dip Switch Settings
Raid Mode 1 2 3 4 5
Individual Drive
(Factory Default)
0
1 and 10
3
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
SATA Port 0
SATA Port 3
OFF
ON
ON
OFF
OFF
ON
OFF
OFF
5
Clone
Large
www.addonics.com Technical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
OFF
OFF
OFF
Enable
ERR Buzzer
Function
OFF
OFF
OFF
AutoRebuilding
to Spare
Drive
ON
OFF
ON
Port Multiplier Mode
OFF
ON
OFF
ON
ON
ON
Loading...