Addonics Technologies ADZIFCF User Manual 2

Installation Guide

Pin 1

Power and
Drive Activity
LED

ZIF connector

Pin 1

Latch

CF Slot

Latch

Latch

ADDONICS TECHNOLOGIES

Model: ADZIFCF

1. Insert the desired Compact Flash into the Addonics 1.8"
ZIF - CF Adapter (ADZIFCF). The Compact Flash
should be keyed to prevent the card from being
incorrectly inserted.

Locking Mechanism on ZIF Connector
Open Position:

The locking mechanism on the ZIF connector is in the open
position if the latch faces vertical.

Close Position:

2. Put the mechanism in the open position and slide the
flat ribbon cable into the ZIF connector on the adapter.

3. Close the latch to secure the ribbon cable connection.

1.8” ZIF- CF adapter shown below attached to a 1.8” ZIF

to 2.5” IDE converter

1.8” ZIF- CF adapter shown below connected to a 2.5”

drive enclosure

The locking mechanism on the ZIF connector is in the close
position if the latch faces horizontal.

Note: Instructions can be found on the FAQ section.

TECHNICAL SUPPORT

Email: http://www.addonics.com/sales/query/
Internet: http://www.addonics.com

Technical Support (8:30 am to 6:00 pm PST)
Phone: [phone]
Email: http://www.addonics.com/support/query/