Addonics Technologies ADSACF-7M, ADSACF-N, ADSACFW, ADSACFB User Manual

T E C H N O L O G I E S

PCI Slot Mount

Eject Button

Bay Mount

User Guide

SATA - CF Adapter

(ADSACFB / ADSACFW /
ADSACF-N / ADSACF-7M)

SATA
Connector

Power
Connector

v7.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/

Hardware Installation:

Step 1: Connect Y-type power cable to the power connector on the adapter. This

will provide power to the adapter and the CF card.

Step 2: Connect a SATA cable to the SATA connector on the adapter and the other
end to the SATA controller port.

Step 3: Start the Computer.

Note: If you insert the CF card while your system is ON and it does not get
detected, probably your SATA host controller does not support hot swap.

CONTACT US

www.addonics.com

Phone: [phone]
Fax: [phone]
Email: http://www.addonics.com/sales/query/