Addonics Technologies ADS3GX4R5-MLM User Manual

ADDONICS TECHNOLOGIES

ADS3GX4R5-MLM (Multilane 4X PCI-X Controller For Mac)

Addonics ADS3GX4R5-MLM Macintosh Instructions

The ADS3GX4R5-MLM has been tested on a PowerMac G5 Dual 2.0
GHz model with PCI-X slots and on a PowerMac G4 with PCI slots.
Mac OS X 10.4.x or later is required for the driver to work properly.

Hardware Install:

1. Turn the PowerMac G4 or G5 off and disconnect all cables.

2. Make sure that you are grounded to avoid static electricity.

3. Open the PowerMac G4 or G5.

4. Install the ADS3GX4R5-MLM in an open PCI or PCI-X slot.

5. Secure the bracket with a screw.

6. Close the PowerMac G4 or G5 and reconnect the cables.

7. Turn on the computer.

Software Driver Install:

1. Copy the SiI3124_2.0.3_Sil_Pkg from the CD to your hard drive.

2. Decompress the zip file by double clicking on it.

3. Launch the SiI3124_2.0.3_Sil_Pkg.

4. Press continue and accept the license.

5. Select your startup drive as the install destination volume.

6. Push continue and the install button.

7. Type in your password to complete the installation.

Usage:

The SiI3124_2.0.3_Sil_Pkg Macintosh driver supplied with the
Addonics ADS3GX4R5-MLM SATA host adapter is designed to
provide multilane compatibility for an Apple PowerMac G4 or G5
running Mac OS X 10.4.x. There are several multilane enclosures
that will work with the ADS3GX4R5-MLM host adapter using the
SiI3124_2.0.3_Sil_Pkg Macintosh driver. Addonics sells a Storage
Tower model ST4SAML configured with a multilane connector. It can
be found here:
http://www.addonics.com/products/raid_system/ast4.asp