Addonics Technologies ADN1GPX User Manual

ADDONICS TECHNOLOGIES

ADN1GPX (Gigabit Ethernet PCI-E Controller)

SPECIFICATIONS

• Fully compliant with IEEE 802.3 (10Base-T

Ethernet), IEEE 802.3u (100Base-TX Fast
Ethernet), IEEE 802.3z (1000Base-T Gigabit
Ethernet)

• Installs into both standard hei ght or low profile

systems.

• Compliant with PCI Express Specification, revision

1.0a

• 1-lane 2.5Gbps PCI Express host interface

• Low Profile PCI Form Factor

• Supports Ethernet 10Mbps (half-duplex), Ethernet

20Mbps (full-duplex), Fast Ethernet 100Mbps (half­duplex), Fast Ethernet 200Mbps (full-duplex),
Gigabit 1000Mbps (full-duplex) and Gigabit
2000Mbps (full-duplex)

• RJ-45 Port offer high speed transmission over CAT

5 UTP cable

• LEDs indicate for various network activities

• Auto-Negotiation with Next page capability

• Supports pair swap/polari ty/skew correction

• Crossover Detection & Auto-Correction

• Microsoft® NDIS5 Checksum Offload (IP, TCP,

UDP) and largesend offload support

• Supports Full Duplex flow control (IEEE 802.3x)

• Supports IEEE 802.1Q VLAN tagging

• 8K Transmit FIFO and 64K Receive FIFO support

• Drivers for Windows 9x, Windows 2000, Windows

2003, Windows XP, Windows XP & Server 2003
64-bit

• Dimension (W x D x H) - 80 mm x 14 mm x 51 mm

• Weight - 40 grams

INSTALLATION

Hardware Installations:

1. Insert the Gigabit Ethernet PCI-Express Controller
to the system’s PCI Express slot.

Windows 2000, XP & 2003 Driver Installations

1. The Found New Hardware Wizard pops on the

screen. Place the Add onics driver disk into the
CDROM drive.

2. Found New Hardware Wizard: Can Windows

connect to Windows Update to search for
software? Select “No, not at this time” Click
Next.

3. The Generic Marvell Yukon Chipset base

Ethernet Controller is identified.

4. Found New Hardware Wizard: What do you

want the wizard to do? Click Next to select the
default.

5. When the new hardware wizard has finish

installing the Ethernet ExpressCard driver,
click Finish to complete the installations.

Confirming Gigabit Ethernet Driver Installation

1. Right click the My Computer icon and select

properties.

2. Click Device Manager in the Menu Tree.

3. Click the “+” sign in front of Network

Adapters. Generic Marvell Yukon Chipset

based Ethernet Controller should appear.

TECHNICAL SUPPORT

Addonics Technologies Phone: [phone]
2466 Kruse Drive Fax: [phone]
San Jose CA 95131
Email: [e-mail]
Internet: http://www.addonics.com

Technical Support (8:30 am to 5:30 pm PST)
Phone: [phone]
Email: [e-mail]