Addonics Technologies AD5HPMSXA User Manual

T E C H N O L O G I E S

User Guide

5-Port HPM-XA System Version

(AD5HPMSXA)

www.addonics.com

v5.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/

RAID Setting Button

Dip Switch

SATA Host Port (Port 5)

SATA Port 2

SATA Port 1

Floppy
Power
Connector

SATA Port 4

Drive activity LED Jumper Block (J1)

Error LED Jumper Block (J3)

Dip Switch Settings

Raid Mode 1 2 3 4 5

Individual Drive

(Factory Default)

0

1 and 10

3

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

ON

ON

ON

OFF

ON

ON

OFF

SATA Port 0

SATA Port 3

OFF

ON

OFF

OFF

5

Clone

Large

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/

OFF

OFF

OFF

Enable
ERR Buzzer
Function

OFF

OFF

OFF

Auto­Rebuilding
to Spare
Drive

OFF

OFF

ON

Port Multiplier Mode

ON

ON

OFF

OFF

ON

ON

Default factory DIP Switch setting:

SW1 – RAID Setting DIP Switch

BZS – Error buzzer function
EZ – Automatic rebuilding to spare drive (one of the drives on the raid is set as a
spare). If EZ is ENABLED anda drive failure occurs, the spare will automatically
act as a drive replacement and rebuilding will automatically start.
M2 – RAID mode 2
M1 – RAID mode 1
M0 – RAID mode 0

OFF

OFF

OFF

OFF

OFF

SW1

1 2 3 4 5

BZS EZ M2 M1 M0

1. Error buzzer function is ENABLED (BZS) when dip switch is in OFF position

2. Auto-rebuilding to spare drive is DISABLED (EZ)

3. Individual drive mode is ENABLED (M0~M2)

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/