Addonics Technologies AD2MS6GPX8-E User Manual

T E C H N O L O G I E S

User Guide

External 8-Port SATA/SAS

PCIe controller

(AD2MS6GPX8-E)

www.addonics.com

v8.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/

Overview

Port 7

3.3 V Port 3

Fault

Fault

Port 6

Fault

Port 2

Fault

Port 5

Fault

Port 1

Fault

Port 4

Fault

Port 0

Fault

Port 7

ACT

Port 3

Fault

Port 6

ACT

Port 2

Fault

Port 5

ACT

Port 1

Fault

Port 4

ACT

Port 0

Fault

3.3
V

GND

heat sink

Port 0-3

Port 4-7

J6 LED pin header

J7 Fan
pin header

Hardware Installation

1. Make sure the computer is OFF.

2. Insert the controller into a PCIe 8X or 16X slot.

3. If desired, connect the ACT LEDs, anode to a 3.3V pin,
cathode to the signal pin. For standard LEDs, use a 120-150 Ohm
load resistor in series.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/