Addonics Technologies AAT18ZIF25 User Manual

T E C H N O L O G I E S

Installation Guide

User Guide

Toshiba 1.8"ZIF to 2.5"
IDE Hard Drive Connector
Converter

(AAT18ZIF25)

2.5” IDE Connector

ZIF Connector

Note: The master and slave pin settings on the 50-pin IDE connector is disabled.

Technical Support

If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/

Pin 1

Pin 1

v4.1.11

Master & Slave Pins

Pin 1Lever

Toshiba 1.8” ZIF
(Zero Insertion Force)
Hard Drive

1. Open the locking lever on the Toshiba 1.8” ZIF hard drive.

2. Slide the flat ribbon cable of the converter into the ZIF connector on the
hard drive.

3. Close the lever to secure the ribbon cable connection.

Connecting the Toshiba 1.8” ZIF hard drive to a 40-pin IDE connector

AA25IDE35 (optional)

www.addonics.com Technical Support (M-F 8:30am - 6:0 0pm PST) Phone: [phone] Email: www.addonics.com/support/query/