Addonics ST5DVRE User Manual
ADDONICS TECHNOLOGIES
Model: ST5DVRE
I. Optical Tower V
Optical drive 1
Opti
cal drive 2
Optical drive 3
Optical drive 4
Optical drive 5
Power Switch
II. Connecting data cable from the tower to the system
Note: It is required that the Optical tower V be connected to a
port multiplier compatible eSATA host controller for the system to
see all nine optical drives. It is assumed that the driver for the
eSATA host controller is correctly installed.
a. Using an eSATA to eSATA cable, connect one end to the
eSATA port on the tower and the other to the eSATA port on
the system.
III. Connecting the power cable and turning on the Optical
wer V
To
a. Connect the power cord provided from the wall outlet to the
back of the tower.
b. A main power switch is located on the front of the tower.
IV. Sharing the Optical drives in Windows
Right click th
Advanc
e drive in My Computer, select Sharing, Select
ed Sharing, share it and set the permissions (full control).
TECHNICAL SUPPORT
Email: http://www.addonics.com/sales/query/
Internet: http://www.addonics.com
Technical Support (8:30 am to 6:00 pm PST)
Phone: 408 453-6212
Email: http://www.addonics.com/support/query/
Loading...