Addonics MSUDDUS User Manual

ADDONICS TECHNOLOGIES

Model: MSUDDUS

USB 5-pin header

Power & drive
activity LED

I. Mounting the Internal Micro SATA UDD on a 3.5” drive

bay

Using the screws provided, mount the bracket on a 3.5” drive bay
on the system

II. Connecting cables

Note: When both SATA and USB connections are used, USB
takes precedence over SATA.

a. USB 5-pin header connection

Connect the USB cable provided to the USB 5-pin
header on the internal micro SATA PCB and the other
end to the USB header on the motherboard.

USB 5-pin header information

SATA port 4-pin floppy

power connector

J6 – Power source jumper
block

Place jumper on
Pins 1-2 (default)
when connecting via USB 5­pin header

Place jumper on
Pins 2-3
when connecting via SATA

b. SATA connection

1. Transfer the jumper on J6 to pins 2-3.

2. Connect the SATA cable provided to the SATA port
on the internal micro SATA PCB and the other end to
the SATA port on the motherboard.

3. Connect the 4-pin floppy connector of the Y-power
cable provided to the 4-pin floppy power connector on
the internal micro SATA PCB.

III. LED information

When power is provided to the Internal Micro SATA UDD, the
power LED will light up. The drive activity LED will blink when
files are accessed and transferred on the drive.

TECHNICAL SUPPORT

Email: http://www.addonics.com/sales/query/
Internet: http://www.addonics.com

Technical Support (8:30 am to 6:00 pm PST)
Phone: [phone]
Email: http://www.addonics.com/support/query/