Addonics HDU5SAS User Manual

ADDONICS TECHNOLOGIES

r

Model: HDU5SAS

I. HDD Duplicator Overview

Note: Make sure that the capacity of the target hard disk is
equal or larger than the source hard disk.

4-pin SATA
po

wer

connecto

Sample Connection Diagram

Destination drive
(black port on
Duplicator console)

HDD Duplicator
Management Console

Target
SATA port 2

Target
SATA port 4

Target
SATA port 5

Target
SATA port 3

Source
SATA ports

Target
SATA port 1

Step 1

nect the Source drive into the source SATA port at the back

Con
of the HDD Duplicator.

Step 2

Con

nect the Target drive(s) into the target SATA port(s) at the

back of the HDD Duplicator.

Step 3

nect a 15-pin SATA power cable from the power supply to

Con
the 15-pin SATA power connector on the HDD Duplicator.

Source drive
(blue port on
Duplicator console)

The Duplicator Panel

II.

T

here are four buttons and an LCD on the panel of HDD
Duplicator.
1 – LCD shows a function or a message.
2 – it is used to
3 – it is used to
4 – it is used to
5 – it is used to

scroll up function menus.
scroll down function menus.
execute a function.
cancel a function.

III.

Duplicating a drive

When the duplicator powers on, it initializes and goes through the
steps below

Shows the firmware version

Initialize SDRAM's status..

Detect Drives' status.

ADDONICS TECHNOLOGIES

Model: HDU5SAS

Shows the first function: Copy HDD.

Cop

y HDD copies data directly from the source hard disk to the

target hard disk.
Press ENT

hard disks and show the following info on the LCD.

The LCD will show the following info during the copying process:
remaining time, completed percentage. The copy speed, capacity
and time will vary depending on the source hard disk. Once the
copying process is complete the LCD will display the follo wing
results.

he complete user manual of the HDD Duplicator Panel can

T
found in the Driver Disk under User Guides or can be
downloaded from

http:/

button to begin copy. The system will auto-detect the

/www.addonics.com/support/user_guides/

Technical Support
Contact Information

e: 408-573-8580

Phon
Fax: [phone]
Email: http://www.addonics.com/sales/query/
Internet: http://www.addonics.com

TECHNIC

Phone: [phone]
Hours: 8:30 am - 6:00 pm PST
Email:

AL SUPPORT

http://www.addonics.com/support/query/