Addonics AEMBRBY INSTALLATION GUIDE

y

r

r

r

ADDONICS TECHNOLOGIES

Model: AEMBRBY

Mounted Blu-ray drive on
the multi-media ba

Ca

ble connections for Blu-ray drive:

Plug-in the SATA cable into a SATA port.

1.

2. Connect the 4-pin Molex power connector to a power
supply.

4-pin Molex power
connecto

Power
LED

Drive
activity LED

SATA
connection

Drive door s
accommodate a 3.5” SATA drive

Reserved connector

Power and
activity LED connector

wings open to

drive

SATA cable

Cable Connections for Multi-media bay:

SATA connection

Reserved
connecto

Power and drive
activity LED connecto

1. A SATA power & data Y-cable is provided with the multi­media bay. Connect this cable to the SATA connection
at the back of the bay.

2. The SATA power & data Y-cable has a third connector.
Attached this connector to the power and drive activity
LED connector as labeled above.

If this connector is not connected, the power & drive
activity LEDs located on the front of the multi-media bay
will not function.

TECHNICAL SUPPORT

Email: http://www.addonics.com/sales/query/
Internet: http://www.addonics.com

Technical Support (8:30 am to 6:00 pm PST)
Phone: [phone]
Email: http://www.addonics.com/support/query/