Additel 9202 Operating Manual

MATERIAL SAFETY DATA SHEET

THE HALLSTAR COMPANY

Section 1 - Identification of Substance and Company

Product Name: MONOPLEX® DOS Product Code: 3143

Chemical Name: Di-2-ethylhexyl Sebacate

(1)

Supplier: The HallStar Company

120 S. Riverside Plaza Suite 1620 Health: 1
Chicago, IL 60606 PH: 877-427-4255 Flammability: 1
USA Reactivity: 0

Emergency Phone Numbers: The HallStar Company [phone]

Chemical Name CAS#
Di-2-ethylhexyl Sebacate 122-62-3

HMIS

Gloves & Safety Glasses

CHEMTREC (transportation) [phone]

Section 2 - Information on Ingredients

Section 3 - Hazard Identification

Appearance/Odor: Clear straw colored liquid; mild inoffensive odor.

Potential Health Effects
Skin Contact: Repeated or prolonged skin contact may cause skin irritation.
Eye Contact: May cause slight eye irritation of susceptible persons.
Ingestion: Substance may be harmful if swallowed. May irritate mouth, throat and stomach.
Inhalation: May cause dizziness.

Section 4 - First Aid Measures

Skin Contact: Wash affected skin with soap and water. Seek medical attention if symptoms persist.
Eye Contact: Flush eyes with large amounts of water for at least 15 minutes. If irritation persists,

consult a physician.

Ingestion: Seek medical advice.
Inhalation: Person should be moved to a fresh air environment.

Section 5 - Explosion and Fire-Fighting Measures

Extinguishing Media: CO2, Dry Chemical, Water Fog
Special Fire-Fighting Procedures: A MSHA/NIOSH approved self-contained breathing apparatus should be worn.
Unusual Fire and Explosion Hazards: Solid streams of water directed at burning liquid may cause frothing.

Page 1 of 3
Revision: 02/13

Product Name: MONOPLEX® DOS

Section 6 - Accidental Release/Spill Procedures

Steps to be Taken in Case Material is Released or Spilled: Dike and contain the spill with inert material (i.e., sand,

earth, sawdust) and transfer liquid and solid diking material to separate containers for recovery or disposal. Wash
floor area with hot water solution. Remove contaminated clothing and wash before reuse. Wash affected skin areas
with soap and water. Keep spills out of all sewers and bodies of water.

Section 7 - Handling and Storage

Any use of this product in an elevated process should be evaluated to establish and maintain safe operating
procedures.

Containers should be kept tightly closed and stored in a dry well-ventilated place

Section 8 - Personal Protection

OSHA Permissible Exposure Limit (PEL): None established

Hand Protection: Impervious gloves
Respiratory Protection: None required for normal operation.
Eye Protection: Safety glasses
Engineering Measures: For normal operation, local exhaust ventilation should suffice. Direct exhaust when

material becomes heated and vapors are given off.

Other: Eyewash facility in vicinity.

Section 9 - Physical and Chemical Properties

Boiling Point: 450-480°F Specific Gravity@25°°°°C : 0.908-0.916
Flash Point (COC): >419°F Evaporation Rate: N/A
Vapor Density (Air=1): N/A Solubility in Water: Negligible
Vapor Pressure (150°°°°C): N/A pH: N/A
Appearance and Odor: Clear straw colored liquid; mild inoffensive odor.

Section 10 - Stability and Reactivity

Stability: This product is stable under normal conditions.
Conditions to Avoid: Unknown
Hazardous Polymerization: Will not occur under normal circumstances.

Section 11 - Toxicological Information

No information is available at this time.

Page 2 of 3
Revision: 02/13