Additel 227 Data sheet

Additel 227, 227Ex
Documenting Multifunction Process Calibrator

Sourcing, Simulating and Measuring Pressure,
Temperature and Electrical Signals

Built-in Full Hart Communicator (ADT227-HART)

Built-in Barometer

Intrinsically Safe Models Available (Ex)

Large Smartphone Like Touchscreen User Experience

USB Type-C and Bluetooth Communications

Pressure / Process Calibration Equipment

IP67 Rated

High Voltage Measurement Capability (300V AC)

True RMS Voltage Meter Capability

Dual Channel Pressure Module Ports

High Static Differential Pressure Measurement 0.002% FS

ISO 17025-accredited Calibration w/data Included

OVERVIEW

Additel’s new Multi-functional Documenting Process Calibrator series takes portability, functionality, and accuracy to
a whole new level and packages it with an intuitive and easy to use color touchscreen display. This series includes an
advanced documenting pressure calibrator (ADT227) and an advanced documentation process calibrator with a built-

in HART communicator (ADT227-HART). Additionally, each calibrator has an ATEX certied intrinsically safe option
(ADT227Ex) allowing you to perform calibration in the harshest of environments. We’re condent these new tools will not

only meet your calibration requirements but will make metrology simple for you!

Features

Easy-to-use Cellphone Like Interface

The ADT227 series brings an all new user interface to the world of process
calibrators. With a menu driven interface and a small size/weight, the ADT227
is the industry's smallest advanced multifunctional process calibrator with an
intrinsically safe version to boot (ADT227Ex). It adopts advanced human hand

engineering design for the most convenient eld handheld process calibrator

available.

The ADT227 has been developed with a powerful embedded operating
system which solves common problems of other designs including slow
response, cumbersome key operation, high power consumption and overall
slow processing.

Accuracy

01

Phone: [phone] Email: [e-mail]

Rev # 20220825

Additel's new and improved ADT227 series provides much improved
accuracies including an electrical accuracy of 0.005% RD + 0.005% FS,
high-static differential pressure mode accuracy to 0.002% FS and across
the board improvements in temperature measurement accuracies.

Corporate Headquarters

2900 Saturn St #B
Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA

Features

Thermocouple Measurement Performance

The ADT227 series delivers highly improved thermocouple measurement
capabilities by vastly improving the cold junction compensation(CJC)

specications and a much improved stabilization time.

Portable and Robust

The demands of remote calibration work can be challenging. The ADT227series is
lightweight and highly portable and utilizes an advanced color LCD screen to help ensure
you can easily see, even in the (Ex) intrinsically safe versions.

Pressure / Process Calibration Equipment

The Additel 227Ex series calibrators have passed the most stringent testing by

certied organizations to acquire intrinsically safe certicates, ATEX, IECEX, CSA

and UKCA. The explosion-proof grade (Ex ia IIC T4 Ga), can be widely used in

potentially explosive environments, such as oil and gas platforms, oil reneries,

chemical and petrochemical plants, pharmaceutical industries, energy and gas
processing industries.

Each intrinsically safe calibrator has an advance transective color LCD display

which has enhanced visibility when viewed in direct sunlight. No matter where
your work takes you, these calibrators are up to the task.

All models in the ADT227 family have been designed with ruggedness and dependability in
mind and meet IP67 standards with a 1-meter drop test, 4G vibration, xenon exposure and
130g steel ball drop testing of the display.

Other environmental conditions have also been considered, such as temperature and
humidity. To combat these external elements, Additel has designed a unique internal circuit

design and process technology to allow for the utmost condence in your critical calibration

and measurement work.

Intrinsically Safe Option

Voltage Meter (RMS)

The Additel 227 non-Ex version is equipped with “true effective
value” RMS measuring function, which can measure the RMS
of various waveforms with no need to consider distortion or
waveform parameters and other errors caused by various
waveforms

02

Automated Tasks for Paperless Calibration Management

Additel 227 Series Calibrators come with a powerful documenting calibration task
application which provides a turnkey solution for automation and paperless calibration
management.

Tasks are easily created for temperature, pressure, ow and loop instruments. Up

to 10,000 documented tasks for ADT227 and up to 1,000 documented tasks for
ADT227Ex can be stored in the extensive on-board memory. Many tasks, when
executed, are fully automated in data collection and performance validation, such as
pass/fail and hysteresis calculations. All information can be integrated into Additel’s
ACal software for additional calibration management.

Full HART Communicaton ( For ADT227-HART only)

The built-in full HART communicator will work with most HART transmitters . The
ADT227-HART contains an extensive DD library to meet the needs of your smart
transmitter. Our DD library is updated on a regular basis and at no additional cost.
The ADT227Ex-HART is integrated with the HART communication functions,
permitting users to monitor, control, and calibrate HART instrumentations.
It's an ideal device for calibrating, maintaining, and troubleshooting HART
instrumentations

Phone: [phone] Email: [e-mail]

Rev # 20220825

Corporate Headquarters

2900 Saturn St #B
Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA

Features

Targeted application features

The onboard applications provide a useful selection of features including HART communicator,
high static differential pressure mode, pressure leak test, safety valve test, analog transmitter
calibration, unit converter, thermal calculator, and snapshots to name a few.

High static differential pressure mode uses two sensors, unique calculation technology to
achieve a differential pressure measurement to 0.002% FS at high static pressures. The leak
test will automatically calculate the pressure drop to determine a leak condition. The safety
valve test is a specialized task which captures the exact pressure release point by taking 10
readings per second during a valve crack test.

Pressure / Process Calibration Equipment

The ADT227 calibrator can record pressure, temperature and electrical signals.
Recorded values can be displayed numerically or graphically to identify trending. The
ADT227 & ADT227-HART can store up to 500 results. each result can include up to
100,0000 recordings and each recording can record a maximum of 7 channel values.
These results can easily be exported to Additel’s application software. Each log

session is easily congured at a set interval and provides a date and time stamp with

each reading.

In addition to all the great features mentioned above, the ADT227series is loaded
with time saving features like our builtin pressure and temperature converter, thermal
calculator, wiring diagram guide for assisting with electrical connections, a built-in
diagnostic center including intelligent alarm messaging and a real time error report
and comprehensive selftesting to help our customers get the very most out of their
investment in Additel calibration tools.

You will nd this and much more as we continue to develop new apps at Additel.

Data Logger

( For ADT227 & ADT227-HART only)

Connectivity & Battery

Users can remotely connect mobile devices to the ADT227 via Bluetooth with
an unobstructed distance up 20 meters. The included USB type-C comm port
and cable provide a hard wired communication option as well as charging for the
removeable Li-ion battery, which provides up to 35 hours of run time.

Time Saving Features

03

SPECIFICATIONS

Electrical Specification

Source Accuracy

Specifications

Voltage DC 0 to 15 V 0.25 mV 0.005%RDG + 0.75 mV 0 to 10.5 V 0.2 mV 0.01%RDG + 0.5 mV

Current DC 0 to 25 mA 0.5 uA 0.01%RDG + 1.2 μA 0 to 25 mA 0.5 uA 0.01%RDG + 1.2 μA

Resistance

Frequency

Voltage mV

(TC)

Pulse

Loop power
(max 25mA)

Phone: [phone] Email: [e-mail]

Rev # 20220825

Range Resolution Accuracy Range Resolution Accuracy

0 to 400 Ω 10 mΩ 0.005%RDG + 20 mΩ 0 to 400 Ω 10 mΩ 0.01%RDG + 20 mΩ

0 to 4000 Ω 100 mΩ 0.01%RDG + 200 mΩ 0 to 4000 Ω 100 mΩ 0.01%RDG + 200 mΩ

0.01 to 5 Hz

5 to 50 Hz 0.002% RD + 0.0002 Hz 5 to 50 Hz 0.002% RD + 0.0002 Hz

50 to 500 Hz 0.002% RD + 0.002 Hz 50 to 500 Hz 0.002% RD + 0.002 Hz

500 to 5000 Hz 0.002% RD + 0.02 Hz 500 to 5000 Hz 0.002% RD + 0.02 Hz

5000 to 50000 Hz 0.002% RD + 0.2 Hz 5000 to 50000 Hz 0.002% RD + 0.2 Hz

-10 to 75 mV 1.5 uV 0.008%RDG + 3.0 μV -10 to 75 mV 1.5 uV 0.01%RDG + 3.0 μV

0 to 9999999 1 N/A 0 to 9999999 1 N/A

Optional rising edge and falling edge, minimum threshold voltage: 2.5V

24 V N/A ±1 V 20 V N/A ± 10%

ADT227 ADT227Ex

0.002% RD + 0.00002 Hz 0.01 to 5 Hz

Auto range,

6-digit

Corporate Headquarters

2900 Saturn St #B
Brea, CA 92821, USA

0.002% RD + 0.00002 Hz

Auto range,

6-digit

Salt Lake City Office

1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA

SPECIFICATIONS

Measurement Accuracy Cont.

Specifications

-300 to 300 mV 1 μV 0.005% RDG + 15 μV -300 to 300 mV 1μV

Voltage DC

Pressure / Process Calibration Equipment

DC High Voltage

AC High Voltage

-30 to 30 V 0.1 mV 0.005% RDG + 1.5 mV -30 to 30 V 0.1 mV 0.01% RDG + 1.5 mV

Temperature Coefcient:

±5 ppm FS/°C (-10°C to 10°C and 30°C to 50°C)

Impedance: -300 mV to 300 mV = > 100 MΩ

-30 V to 30 V = >1 MΩ

-3 to 3 V

-30 to 30 V 0.05% RDG + 3 mV

-300 to 300 V 0.05% RDG + 30 mV

Temperature coefcient: ±0.0025% FS/°C

(-10°C to 10°C and 30°C to 50°C)

Maximum input voltage = 300 V, IEC61010 300V CATII

Commong mode rejection: >100 dB (at 50 or 60 Hz)

Impedance: > 4 MΩ, DC coupling

3V (40 to 500 Hz)

30V (40 to 500 Hz) 0.5% RDG + 15 mV

300V (40 to 500 Hz) 0.5% RDG + 150 mV

Temperature coefcient: ±（0.025% RD + 0.0025% FS）/°C

(-10°C to 10°C and 30°C to 50°C)

Maximum input voltage = 300 V, IEC61010 300V CATII

9% to 100% of range is suitable for the above accuracy indicators

ADT227 ADT227Ex

Range Resolution Accuracy Range Resolution Accuracy

0.01% RDG + 15 μV

Temperature Coefcient:

±5ppm FS/°C (-20°C to -10°C)

0.05% RDG + 0.3 mV

10 mV

N/A

0.5% RDG + 1.5 mV

10 mV

N/A

Current DC

Resistance

(4-Wire)

Voltage mV (TC)

Frequency

Pulse

Impedance: >4 MΩ, <100pF, AC coupling

-30 to 30 mA 0.1 μA 0.01% RDG + 1.5 μA -30 to 30 mA 0.1 μA 0.01% RDG + 1.5 μA

Temperature Coefcient: ±5ppm FS/°C (-10°C to 10°C and 30°C
to 50°C), Impedance: < 40 Ω

0 to 400 Ω 1 mΩ 0.005% RDG + 20 mΩ 0 to 400 Ω 1 mΩ

0 to 4000 Ω 10 mΩ 0.01% RDG + 200 mΩ 0 to 4000 Ω 10 mΩ

Temperature coecient:

±5 ppm FS/°C (-10°C to 10°C and 30°C to 50°C)

2-Wire + 50 mΩ, 3-wire+ 10 mΩ

Excitation current: 0.2 mA

-10 to 75 mV 0.1uV 0.008% RDG + 3.0 μV -10 to 75 mV 0.1uV 0.01% RDG + 3.0 μV

Temperature Coefcient:

±5ppm FS/°C (-10°C to 10°C and 30°C to 50°C)

Impedance: >100 MΩ

0.01 to 5 Hz

5 to 50 Hz

50 to 500 Hz 0.002% RD + 0.002 Hz 50 to 500 Hz 0.002% RD + 0.002 Hz

500 to 5000 Hz 0.002% RD + 0.02 Hz 500 to 5000 Hz 0.002% RD + 0.02 Hz

5000 to 50000 Hz 0.002% RD + 0.2 Hz 5000 to 50000 Hz 0.002% RD + 0.2 Hz

Minimum threshold voltage: 2.5 V

Supported units: Hz, kHz, MHz, CPM, CPH, s, ms, μs

0 to 9999999 1 N/A 0 to 9999999 1 N/A

Optional rising edge and falling edge, minimum threshold voltage: 2.5V

Auto range,

6-digit

0.002% RD + 0.00002 Hz 0.01 to 5 Hz

0.002% RD + 0.0002 Hz

Temperature Coefcient:

±5ppm FS/°C (-20°C to -10°C)

Temperature Coefcient:

±5ppm FS/°C (-20°C to -10°C)

Temperature Coefcient:

±5ppm FS/°C (-20°C to -10°C)

5 to 50 Hz

Auto range,

6-digit

0.01% RDG + 20 mΩ

0.01% RDG + 200 mΩ

0.002% RD + 0.00002 Hz

0.002% RD + 0.0002 Hz

04

Switch Supports dry or wet switches. Voltage range of 3 to 30 V. Response speed < 10 ms

Phone: [phone] Email: [e-mail]

Rev # 20220825

Corporate Headquarters

2900 Saturn St #B
Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA

SPECIFICATIONS

Genreal Specification

Specifications

Operating Temperature -10°C to 50°C -20°C to 50°C

Specification guaranteed

temperature range

Storage Temperature -30°C to 70°C -30°C to 70°C

Humidity <95%, non-condensing <95%, non-condensing

Power supply

Pressure / Process Calibration Equipment

User interface Icon drive menus Icon driven menus with navigation buttons

Ports protection voltage

Display

Data logger

Maximum altitude 3000 meters

European Compliance CE, UKCA

Electrical Connection Ø4mm sockets and at mini-jack thermocouple socket

Size 6.97" x 4.13" x 2.04" (177 mm x 105 mm x 52 mm)

Weight 1.6 lb (0.7 kg) 1.65 lb (0.75Kg)

Battery Rechargeable Li-ion battery (included)

Battery Life Typically 16 hours Typically 35 hours

Battery Charge 110V/220V external power adapter included. Battery can be charged external to the unit. Typically charge time is 6-8 hours.

External pressure module Dual channel aerial plug, can connect two digital pressure modules

Warm-up time Full specication performance is achieved after a 10 minute warm-up time.

ROHS compliant

Display rate

Barometric Accuracy

(Built-in barometer)

IP protection level IP67, 1 meter drop test

Communication Isolate USB-TYPEC (slave), Bluetooth BLE

User Interface

Localization

Calibration ISO 17025 accredited calibration with data

Warranty 3 years

6600mAh, 23.8Wh lithium battery, charging time 4~6

hours, battery pack can be charged independently

5.0 inch 480 x 800 mm TFT LCD capacitive screen 4.4 inch 640 x 480 mm color display capacitive screen

500 results, each result x 100,0000 recordings,

each recording records a maximum of 7 channel values

English, German, French, Italian, Spanish, Portuguese,

Simplied Chinese, Traditional Chinese, Japanese,

ADT227 ADT227Ex

10°C to 30°C 10°C to 30°C

4000mAh 14.4Wh Explosion-proof lithium battery packcharging time

6~8 hours, battery pack can be charged independently

50V max

(Only for the top ports)

Rohs II Directive 2011/65/EU, EN50581:2012

3 readings per second

55Pa

English, Simplied Chinese, Traditional Chinese, Japanese

Russian, Czech, Slovak

30V max

N/A

CE

05

Pressure Specification

Pressure Specification (ADT227 & ADT227Ex)

The ADT161 and ADT161Ex series Intelligent Digital Pressure Modules are available for gauge, vacuum and absolute pressure from -15 psi to 60,000 psi (-1
bar to 4200 bar).

Accuracy from 0.02% FS includes operation over 14°F to 122°F (-10°C to 50°C), one year stability and calibration uncertainty. For detailed specications,

please refer to the pressure modules datasheet.

Phone: [phone] Email: [e-mail]

Rev # 20220825

Corporate Headquarters

2900 Saturn St #B
Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA

SPECIFICATIONS

Temperature Specification

Thermocouple Measurement and Source Accuracy

Type Standard Temperature Range (oC)

S IEC 584 -50 to 1768

R IEC 584 -50 to 1768

Pressure / Process Calibration Equipment

B

K

N IEC 584 -270 to 1300

E IEC 584 -270 to 1000

C ASTM E988 0 to 2315

D ASTM E988 0~2315

G ASTM E1751 0 to 2315

U DIN43710 -200 to 600

Note: Internal CJC is ±0.15°C (-10°C to 50°C ambient temperature)
Accuracy with external cold junction only, for internal cold junction add 0.15 ℃(k=2)

IEC 584 0 to 1820

IEC 584 -270 to 1372

J

IEC 584 -210~1200

T IEC 584 -270 to 400

L DIN43710 -200 to 900

ADT227 ADT227Ex

Accuracy (oC)

Measure / Source Measure / Source

-50~0 0.77

0~100 0.56 100~1000 0.56

100~1768 0.44 1000~1768 0.47

-50~0 0.82

0~200 0.57 0~200 0.57

200~1768 0.38 200~1768 0.42

200~300 1.51

300~500 1.00 300~500 1.00

500~800 0.62 500~800 0.62

800~1820 0.43 800~1820 0.43

-250 to -200 0.72

-200 to -100 0.23 -200 to -100 0.24

-100 to 600 0.12 -100 to 600 0.13

600 to 1372 0.22 600 to 1372 0.25

-250 to -200 1.14

-200 to -100 0.33 -200 to -100 0.34

-100 to 1300 0.19 -100 to 1300 0.22

-250~-200 0.39

-200~-100 0.15 -200~-100 0.15

-100~700 0.09 -100~700 0.10

700~1000 0.12 700~1000 0.14

-210~-100 0.19

-100~700 0.10 -100~700 0.11

700~1200 0.15 700~1200 0.17

-250~-100 0.55

-100~0 0.12 -100~0 0.12

0~400 0.08 0~400 0.08

0 to 1000 0.24

1000 to 1800 0.40 1000 to 1800 0.45

1800 to 2315 0.65 1800 to 2315 0.73

0~100 0.31

100~1200 0.25 100~1200 0.27

1200~2000 0.42 1200~2000 0.47

2000~2315 0.65 2000~2315 0.74

50~100 0.90

100~200 0.57 100~200 0.57

200~400 0.35 200~400 0.36

400~1500 0.25 400~1500 0.27

1500~2315 0.49 1500~2315 0.55

-200 to -100 0.11

-100 to 400 0.08 -100 to 400 0.09

400 to 900 0.10 400 to 900 0.12

-200 to 0 0.21
0 to 600 0.08 0 to 600 0.09

Standard Temperature Range (oC)

IEC 584 -50 to 1768

IEC 584 -50 to 1768

IEC 584 0 to 1820

-250 to -200 0.75

IEC 584

IEC 584 -270 to 1300

IEC 584 -270 to 1000

IEC 584 -210~1200

IEC 584 -270 to 400

ASTM E988 0 to 2315

ASTM E988 0~2315

ASTM E1751 0 to 2315

DIN43710 -200 to 900

DIN43710 -200 to 600

-270 to 1372

-250 to -200 1.17

-200 to -100 0.12

-50~100 0.77

-50~0 0.82

200~300 1.51

-250~-200 0.41

-210~-100 0.20

-250~-100 0.57

0 to 1000 0.26

0~100 0.31

50~100 0.90

-200 to 0 0.21

Accuracy (oC)

06

Phone: [phone] Email: [e-mail]

Rev # 20220825

Corporate Headquarters

2900 Saturn St #B
Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA

SPECIFICATIONS

RTD Measurement and Source Accuracy

Measure and Simulate Temperature Range (°C)

PT10(385)

PT25(385) -200 to 850

Pressure / Process Calibration Equipment

PT50(3916) -200 to 850

PT100(385)

PT100(391)
PT100(3916)
PT100(3926)

PT200(385) -200 to 850

PT400(385) -200 to 850

PT500(385) -200 to 850

PT1000(385) -200 to 850

Cu10(427) -200~260 -200~260 0.54 0.56

Cu50(428) --200~260 -200~260 0.11 0.13

Cu100(428) -200~260 -200~260 0.07 0.08

Ni100(617)
Ni100(618)

Ni120(672) --80~260 -80~260 0.04 0.05

Ni1000 -50~150 -50~150 0.07 0.07

-200 to 850

-200 to 850

-60~180

Accuracy (°C)

ADT227 ADT227Ex

-200~200 0.57 0.59

200~600 0.67 0.72

600~850 0.75 0.82

-200~200 0.24 0.27

200~600 0.30 0.35

600~850 0.34 0.41

-200~200 0.13 0.16

200~600 0.17 0.22

600~850 0.20 0.27

-200~200 0.08 0.10

200~600 0.11 0.16

600~850 0.14 0.20

-200~200 0.32 0.32

200~300 0.34 0.34

300~600 0.41 0.41

600~850 0.48 0.48

-200~0

0~200 0.18 0.18

200~600 0.25 0.25

600~850 0.30 0.30

-200~200 0.16 0.16

200~600 0.22 0.22

600~850 0.27 0.27

-200~200 0.10 0.10

200~600 0.16 0.16

600~850 0.20 0.20

-60~0 0.05 0.06

0~180 0.05 0.05

0.15 0.15

07

*Note: Ambient temperature of 20°C±10°C.

4-wire accuracy. For 2-wire add 50 mΩ, for 3-wire add 10 mΩ

Phone: [phone] Email: [e-mail]

Rev # 20220825

Corporate Headquarters

2900 Saturn St #B
Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA

ORDERING INFORMATION

Model Number

ADT227

•••

HART

ADT227
ADT227Ex: Intrisically Safe

Pressure / Process Calibration Equipment

HART = HART Capabilities

Accessories (included)

Model number Description QTY

9811-X

9811Ex-X

9704

9704Ex

9023 Test leads 1 set (6 pcs)

9027

9060

9052

9052Ex

9040 Hanging strap with magnet 1 pc

110V/220V external power adapter

(Only for ADT227 & ADT227-HART)

110V/220V external power adapter

(Only for ADT227Ex & ADT227Ex-HART)

Chargeable Li-ion battery

(Only for ADT227 & ADT227-HART)

Chargeable Li-ion battery

(Only for ADT227Ex & ADT227Ex-HART)

Right angle test leads
(Non-Ex models only)

Pressure module connection cable

USB Cable type A to type C (Non-Ex models only) 1 pc

Ex USB Cable type A to type C (For Ex models only) 1 pc

ISO 17025 accredited calibration certicate 1 pc

Optional Accessories

Model number Description

ADT161 - XXX Digital Pressure Modules

1 pc

1 pc

1 pc

1pc

1 set (2 pcs)

1 pc

ADT161Ex - XXX Intrinsically Safe Digital Pressure Modules

ADT129-X Differential Pressure Manifold, -15 to 3,000 psi

9062

AM1602-6FT

9080

9704

9704Ex

9811-X

9811Ex-X

9906A

9918-SC

9530-BASIC

9530-NET

* Additel/Land software can be downloaded for free at www.additel.com

Connection adapter cable for Fluke style pressure
modules to non-explosion-proof Additel readouts

Class A, PT100/385 Industrial RTD, -40°C to 160°C,
3/16 (4.76 mm) inch x 2 inch (50 mm) with 6 foot (1.8
Meters) cable w/ banana jack connectors

Cable kit (including TC plug, compensation cable,
S,R,K,J,T,E,N)

Spare chargeable Li-ion battery for multifunction
calibrator ADT227 & ADT227-HART

Spare chargeable Li-ion battery for multifunction
calibrator ADT227Ex & ADT227Ex-HART

110 V/220 V external power adapter for handheld
models ADT227 & ADT227-HART
110 V/220 V external power adapter for Ex handheld
models ADT227Ex & ADT227Ex-HART

Hard carrying case for handheld instrument with
accessories

Soft carrying case, with space for handheld instrument,
test leads, and accessories

Additel/Acal Task management software for
multifunction calibrator

Additel/Acal Automated calibration software with
asset management, network version, Includes server
installation and 1 user license

08

Phone: [phone] Email: [e-mail]

Rev # 20220825

Corporate Headquarters

2900 Saturn St #B
Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA