Additel 209, 210 Specifications

Additel 209 and 210 Series Loop Calibrator

Accuracy to 0.01% of reading
Small and rugged handheld design
Measure, source, or simulate loop current
Measure DC volts
Simultaneously mA and % span display
Switch functionality
Selectable ramp and step functions
Easy to read display and user interface

Pressure / Process Calibration Equipment

HART 250Ω resistor in series with 24V loop

OVERVIEW

The new Additel 209 and 210 loop calibrator series combine ease of use and
functionality, making them the ideal tools to troubleshoot your process loop.
The ADT209 has an accuracy of 0.03% of reading whereas the ADT210
holds an accuracy of 0.01% of reading. If you want to source, simulate or
simply measure, the Additel Loop calibrator series will fit your need. The
ADT209 and ADT210 allow for measurement of current, voltage and a switch.
You can also simulate or source mA or a process transmitter. With a push of
a button, you can switch to zero and span values, auto ramp, and auto step
throughout the range. Each loop calibrator has a large, easy to read screen
which simultaneously displays the measurement with the % of span.

ELECTRICAL MEASURE SPECIFICATIONS

Range Resolution ADT209 Accuracy ADT210 Accuracy

1

Voltage DC

Current DC

Switch test

[1] 1MΩ input resistance
[2] Loop transmitter current measure: 700Ω maximum

0 to 30 V 1 mV 0.03%RD + 2mV 0.01%RD + 2mV

2

0 to 24 mA 1 µA 0.03%RD + 2µA 0.01%RD + 2µA

Input resistance more than 500 MΩ

Trigger level: low level <0.3V; high level: >2V

ELECTRICAL SOURCE SPECIFICATIONS

Range Resolution ADT209 Accuracy ADT210 Accuracy

Current DC 0 to 24 mA 1 µA 0.03%RD + 2µA 0.01%RD + 2µA

Source mode 700Ω/20 mA maximum

Sink mode External loop voltage nominal 24V, maximum 30V, minimum 12V

01

Phone: [phone] Fax: [phone] Email: [e-mail]

Corporate Headquarters

2900 Saturn St #B
Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA

GENERAL SPECIFICATIONS

Voltage limit 30V between terminals or between terminals and ground

Measurement Functions Auto step, auto ramp, span step

Display VA LCD display. 2.04 x 2.04 in (52 x 52 mm)

Loop power 24V

Over-voltage protection 30V DC (240V AC)

Overload current protection 33 mA DC

Storage temperature -20°C to 70°C

Pressure / Process Calibration Equipment

Working Environment -10 to 50°C, 95%RH

Working Altitude <3,000 m

Vibration/shock

Power

Battery life (typical)

Size (LxWxH) 163 x 83 x 41 mm

Weight 350 g

Calibration Certification ISO17025 accredited certicate of calibration with data

Compliance Certification

Warranty 3 years

Random 2G 5 to 500Hz
1 meter drop

One 9V alkaline battery (ANSI/NEDA 1604A or IEC)

DC9V optional adapter available

Output mode: 18 hours (12 mA/500Ω)

Measure mode: 50 hours

ADT209: CSA, CE, DNV
ADT210: CSA, CE, DNV

ORDERING INFORMATION

Model Number

ADT209

02

ADT210

Accessories included

Test lead set 1 set

Alligator clips 2 pcs

User manual 1 pc

9V Alkaline battery 1 pc

Optional Accessories

9812 110V/220V external power adapter (DC 9V)

Phone: [phone] Fax: [phone] Email: [e-mail]

Corporate Headquarters

2900 Saturn St #B
Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA