Additel 12X Datasheet

Pressure Manifolds

Additel 12X Series

The 12X series pressure manifolds are designed for expanding pressure test ports during pressure calibration. The
Additel 121 pressure manifold is used for pneumatic pressure calibration up to 3,000 psi (200bar), while the Additel 123

manifolds is compatible to hydraulic pressure applications up to 15,000 psi (1,000 bar). A lter is built-in with the 121

pneumatic pressure manifold to prevent contamination introduced by devices under test. There are four hand-tight quick
connectors pre-installed on each manifold. Additel 12X series pressure manifolds allow you to connect without the use

of wrenches or Teon tape which increases your productivity when using calibration pumps, pressure controllers, dead

weight testers, or piston gauges.

Pressure / Process Calibration EquipmentAdditel Datasheet 2014 / 2015

121 series Pressure Manifolds

123 series Pressure Manifolds

Pneumatic, -15 psi to 3,000 psi (-1 to 200 bar)

Model Description

ADT121-N 1/4NPT male hose to four 1/4NPT female hand-tight quick connectors

ADT121-N2 1/2NPT male hose to four 1/2NPT female hand-tight quick connectors

ADT121-M M20×1.5 male hose to four M20×1.5 female hand-tight quick connectors

ADT121-B 1/4BSP male hose to four 1/4BSP female hand-tight quick connectors

Hydraulic, -15 to 15,000 psi (-1 to 1,000 bar)

Model Description

ADT123-N 1/4NPT male hose to four 1/4NPT female hand-tight quick connectors

ADT123-N2 1/2NPT male hose to four 1/2NPT female hand-tight quick connectors

ADT123-M M20×1.5 male hose to four M20×1.5 female hand-tight quick connectors

ADT123-B 1/4BSP male hose to four 1/4BSP female hand-tight quick connectors

Note: A test hose is included with every Additel 12X pressure manifold.

Corporate Headquarters

22865 Savi Ranch Parkway Ste F
Yorba Linda, CA 92887, USA

Phone: [phone]
Fax: [phone]
Email: [e-mail]

Salt Lake City Office

802 Bamberger Dr, Suite C
American Fork, UT 84003, USA

Phone: [phone]
Fax: [phone]
Email: [e-mail]