Addictive Desert Designs Stealth Rear Bumper User Manual
Addictive Desert Designs
2009 – Current Dodge 1500
Stealth Rear Bumper
Installation instructions
PREPARATION STEPS
1. Set emergency brake.
2. You will need the following tools:
a. 3/4” wrench
b. 3/4” socket
Note: This installation requires 2 people for best results
3. Included in Kit:
a. Stealth Rear Bumper
b. Hardware Kit
i. Four ½ x 1 bolts
INSTALLATION INSTRUCTIONS
1. Remove stock bumper.
2. Now you will line up the bolt holes of your new A.D.D rear Stealth bumper with the same bolt
location as your stock bumper.
3. Next you will use the four ½ x 1 bolts provided to tighten you’re A.D.D bumper to your truck.
4. Now you will want to clip your sensors onto your new bumper. (if sensors placement necessary)
5. Stand back and enjoy your A.D.D. Stealth Rear Bumper.
For additional support or technical questions,
please call 480.671.0820 or
email info@addictivedesertdesigns.com
Addictive Desert Designs
4840 E. Jasmine Street Suite 112
Mesa, AZ 85205
www.addictivedesertdesigns.com
Loading...