Addictive Desert Designs Flat Bar Roof Mount User Manual

Addictive Desert Designs

2010 – 2014 ford f150 series

flat bar roof mount

installation instructions

PREPARATION STEPS

1. Disconnect the negative terminal on the battery. With the vehicle on level ground and the

emergency brake set.

2. You will need the following tools:
a. Drill
b. 1/4” Drill Bit
c. 1/4” Rivets (6)

Note: This installation requires 2 people for best results

3. Included in Kit:
a. Right Mount(1)
b. Left Mount(1)

INSTALLATION INSTRUCTIONS

1. Mount light bar into both Roof Mounts to create an assembly.

2. Carefully remove the weatherstrip from the door Jams.

3. Carefully align top of mounts to top of the rivet located inside the door jamb, under the

weatherstrip. Do this for both sides of the truck.