FlexWave™ WMX 5000
Carrier-Grade WiMAX Base Station
With the FlexWave™ WMX 5000, ADC delivers the industry’s highest density, highest capacity, and
highest performing base station. Designed for modular growth and service evolution, the FlexWave
WMX 5000 sets a new standard for carrier-grade WiMAX base stations.
FlexWave WMX 5000 operates in licensed and license-exempt bands under virtually all wireless
conditions, giving providers a versatile platform for maximizing WiMAX revenue opportunities.
The FlexWave WMX 5000 hardware is based on the ATCA open standard, incorporating
the latest advances in reliability, availability, and serviceability for carrier-grade, high-speed
telecommunications. Designed to accommodate up to 12 wireless sectors, the FlexWave
WMX 5000 system requires just 5U of rack space — making it the highest density base station
currently available. This versatile, space-saving solution allows operators to offer a broad range
of voice, data, and multimedia services, while driving down the operational and capital outlays
required to scale the network.
Features:
• Highest capacity; highest density WiMAX base station
• Modular design supporting pay-as-you-grow business model
• Seamless co-location with mini and micro base stations for expanded network coverage
• Comprehensive system redundancy for carrier-grade resilience
• Upgradeable to IEEE 802.16e based mobility
Spec Sheet
www.adc.com • +1-952-938-8080 • 1-800-366-3891
WMX 5000
™
FlexWave™ WMX 5000
Carrier-Grade WiMAX Base Station
The FlexWave WMX 5000 modular design accommodates a large number of deployment options. With
1:1 or 1:N redundant wireless sectors, the FlexWave WMX 5000 can support: 12-sector base station,
redundant 6-sector base stations, redundant four sector and other configurations within a single chassis.
The FlexWave WMX 5000 meets stringent operator deployment needs, while bridging gaps from
pre-WiMAX to fixed WiMAX, indoor consumer WiMAX, and fully mobile WiMAX.
Typical Applications
• Last mile, carrier deployments supporting
small initial roll outs, growing to support
thousands of subscribers in a single
5U platform
• Converged fixed-mobile service offering
including multi-user, multi-application,
and multi-service simultaneously
• Scalable VoIP service with per-subscriber
QoS and dynamic link adjustment
• Fixed, nomadic, and portable WiMAX
services evolving to support full mobility
• Bandwidth-hungry video and data
applications requiring low latency
and predictable performance
• Licensed or unlicensed WiMAX backhaul
for municipal (mesh) network or cellular
network remote site traffic
FlexWave
10/07 • 102578AE
www.adc.com • +1-952-938-8080 • 1-800-366-3891
2
FlexWave™ WMX 5000
Carrier-Grade WiMAX Base Station
Specifications
WMX 5000
™
FlexWave
RADIO AND SYSTEM SPECIFICATIONS
Compliance:
Duplexing Mode, PHY:
Frequency:
Channel Bandwidth:
Step Size:
Radio Output Power:
Receiver Sensitivity:
Modulation:
Forward Error Correction:
IP Networking Features/Options
IP Version:
Bridging Mode:
Routing:
VLANs:
Security/Encryption
Authentication:
Encryption:
MULTI-SERVICE/MULTI-USER SUPPORT
Traffic Classifier:
Scheduling/QoS:
Max # Sectors:
Active Connected Subscriber Units:
Uni-directional Service Flows:
CARRIER GRADE FEATURES
Chassis:
Power Options:
Modularity:
Redundancy:
IEEE 802.16-2004 (3.5T1, 3.5T2), ETSI HiperMAN,
IEEE 802.16e-2005 upgradeable
TDD, OFDM 256 FFT: SOFDMA upgradeable
3.3 - 3.4 GHz, 3.4 - 3.6 GHz, 5.725 - 5.925 GHz
Future: 2.5 - 2.7 GHz, 3.6 - 3.8 GHz, 5.150 - 5.35 GHz,
5.475 - 5.725 GHz
3.0 MHz, 3.5 MHz, 5.5 MHz, 7.0 MHz
Future: 1.75 MHz, 5 MHz, 10 MHz
250 KHz
17 dBm, 20 dBm, 30 dBm options
-95.1 dBm (3.5 MHz)
BPSK, QPSK, 16QAM, 64QAM
Convolution coding 1/2, 2/3, 3/4
IPV4 (RFC 791)
IEEE 802.3d
RIP V2, OSPF (future)
IEEE 802.1 P/Q
X.509 based authentication
3DES, AES CCM 128, 1024
MAC DA/SA, 802.1 P/Q, IP SA/DA, IP Protection, IP TOS,
TCP/UDP Port
UGS, rtPS, nrtPS, BE, CIR, MIR
12 non-redundant; 6 with 1:1 redundancy
up to 6144 (512 per sector)
up to 7168 managed
5U Advanced TCA; 19" telco rack mountable
-48 VDC; AC
Individually deployable wireless sectors, fan unit, main
system controller units
Wireless sectors: 1:1; 1:N (future)
Main system controllers: 1:1
Power Distribution: 1:1
PHYSICAL INTERFACES
RF sectors, IF Port:
Ethernet Backhaul:
Management:
External clock, Synchronization:
Antenna Port:
10/07 • 102578AE
www.adc.com • +1-952-938-8080 • 1-800-366-3891
IF Port:
up to 12 if port for connection to BSR (type-F,
Female, 75 ohM)
1 x 100 BT, 1 x 1000 BT (RJ45); 1 x 1000 B FX
10/100 BT; RS-232 (RJ45): 10 BT (RJ45); RS-232
1Hz Sync (BNC), 10 MHz Clock (BNC)
Optional GPS External Clock Input (future)
Type-N
Type-F
3
MANAGEMENT
Remote Management and Monitoring:
Local Management and Monitoring:
Provisioning:
SNMP:
MECHANICAL
Indoor Unit Dimensions (W x H x D):
Indoor Unit Weight:
Outdoor Unit (W x H x D):
IDU-ODU Distance:
ELECTRICAL
Input DC Voltage:
Input AC Voltage:
Max Power Consumption:
WaveCenter EMS Pro, CLI (Telnet), SNMP
CLI (RS 232)
Centralized using WaveCenter EMS Pro (SNMP)
MIB II (RFC 1213), Enterprise MIB;
SNMP V2 IEEE 802.16f MIB
19 x 8.6 x 17 (inches), 48.2 x 21.8 x 43.1 (cm)
27 lbs / 12.2 kg (chassis only); 37 lbs / 16.8 kg
(4 sector, 1 MSC, 1 Fan Unit, DC)
2.75 x 11.75 x 11.75 (inches), 7 x 29.8 x 29.8 (cm)
up to 250 m
-42 to -58 Volts (recommended), -36 to -72 Volts (maximum)
85 to 264 VAC, 47 to 63 Hz
530W DC & 550W AC
ENVIRONMENTAL
Weather Protection:
Operating Temperature (Outdoor Unit):
Humidity (Outdoor Unit):
RoHS Compliance:
Spec Sheet
INDOOR
na
0º to 40º C (32º to 104º F)
10–90%, non-condensing
yes
OUTDOOR
IP65/NEMA-4
-35º to 60º C (-31º to 149º F)
5-95%, non-condensing
yes
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products orfeatures
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
102578AE 10/07 Revision © 2007 ADC Telecommunications, Inc. All Rights Reserved
Loading...