ADC WBS-3190 User Manual
HiGain® Wideband 3190
Integrated SONET/DS3 Multiplexer for HDSL/HDSL2/HDSL4
The HiGain® Wideband 3190 (WBS-3190) combines an industry-standard STS-1 or DS3
multiplexer with ADC’s industry-standard HDSL, HDSL2 or HDSL4 distribution system. The
Wideband implementation maintains full compatibility and interoperability with HiGain legacy
products. This product compatibility allows you to protect your current investment in HDSL, while
benefitting from our latest technology developments.
Spec Sheet
Features:
• Versatile, open-system architecture
• Defined migration path from DS3 to STS-1 network interfaces
• Integrated HDSL distribution system with STS-1 or DS3 multiplexing function
™
• Telcordia TIRKS
and alarm surveillance
• Extremely low cost per port
• Integrated, open management system
• Optional 1+1 board protection on the DS3 or STS-1 interface
• NEBS Level 3 and UL compliance
• Supports TL1-based remote metallic and electrical test access systems (MLT)
• Hekimian PMI compliant
• Interoperable with Harris 107 Test Set
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
and NMA™ integration for flow-through service provisioning
HiGain® Wideband 3190
Wideband 3190
DS3
STS-1
DS3
STS-1
(HXU)
DSX-1
DS1
DS1
DSX-1
HDSL
HDSL
Remote
OFFICE T1
BAY REPEATER
DSX-1
T1
NIU
T1
LOOP
THROUGH
DS1
DSX-1
HDSL4
DS1
HDSL4
Remote
HDSL2 LU HDSL2
Remote
Integrated SONET/DS3 Multiplexer for HDSL/HDSL2/HDSL4
The WBS-3190 multiplexes 28 HDSL lines into a single DS3 or STS-1 line interface. By providing industrystandard interfaces between system components that are independently configured, it maintains a truly
open architecture. This architecture allows any industry-standard 3190 card to access the Wideband
shelf. Despite its small form factor, the WBS-3190 provides a common architecture that supports all
system functions. It houses up to 28 line units (HLU), a management unit (HMU), two multiplexer units
(HXU) and an optional fan assembly (HFA). The HXU multiplexer system provides a managed, high-level
DS3 or STS-1 trunk interface at the CO. Both TL1 and TAO (craft-VT100) management systems are
supported on X.25, 10BASE-T and RS-232 interfaces along with alarm relay contacts and redundant
A/B office battery connections. A 7-foot CO rack can support up to six WBS-3190 chassis and meets all
NEBS requirements while providing up to 168 DS1 access lines to the field.
Open System Advantages
The HiGain Wideband 3190 delivers critical advantages through an open-system architecture. This
design approach, along with complete backward compatibility with existing HiGain components,
results in an extremely low cost per port. Additionally, reliability is greatly enhanced, and long-term
operating costs are contained through “single-wire” management capabilities that enable precise,
flexible system monitoring.
Wideband 3190
®
HiGain
6 / 0 7 • 1 0 4 7 3 2 A E
Figure 1: HiGain Wideband3190
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
2
®
Wideband 3190
HiGain® Wideband 3190
Integrated SONET/DS3 Multiplexer for HDSL/HDSL2/HDSL4
DS3 Multiplexer Standard Features
• Supports M13 and C-Bit parity frame format
• Supports extensive loopbacks on DS3 and DS1 interfaces
• Flexible Time Slot Assignment (TSA) capabilities
• Both in-band and out-of-band loopback control
• Full 1+1 network services and card protection option
• Front-panel DSX-1 test access
• Non-volatile storage of all configuration data
• Comprehensive Operations, Administration, Maintenance
and Provisioning (OAM&P) data
• Front panel LED indicators for power, alarm
and fault monitoring
STS-1 Multiplexer Standard Features
• Supports VT1.5 and VT2 SONET mapping
• Supports extensive loopbacks on STS-1 and DS1 interfaces
• Complete Time Slot Assignment (TSA) flexibility
• Full 1+1 network services and card protection option
• Non-volatile storage of all configuration data
• Comprehensive Operations, Administration, Maintenance and Provisioning (OAM&P) data
• Front panel LED indicators for power, alarm and fault monitoring
6 / 0 7 • 1 0 4 7 3 2 A E
HiGain
HDSL/HDSL2/HDSL4 Industry-Leading Benefits
• Full-rate T1 over a single copper pair means that you can cost-effectively meet today’s demand for
voice, data and video services
• Industry-standard interoperability results in cost-effective implementation and network expansion
• Reach up to 12,000 ft on 24 AWG enables service to more customers
• HDSL supports greater distances with a 5-span reach of up to 60 kft on 24 AWG
Management
• Systems are fully network manageable and support TL1 language
• Supports communications protocols such as Telnet, RS-232 and X.25
• Supports a local craft interface for provisioning and alarm reporting
• Supports dry contact alarm relay monitoring systems
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
3
Loading...