Page 1
UltraWAVE
GSM Network-In-A-Box
ADC's GSM Network-In-A-Box (NIB) combines GSM MSC, Base Station Controller and Base
Transceiver Station in a single box. It provides the smallest and lowest entry point into the
GSM wireless space. ADC's MSC, BSC and BTS work hand-in-hand to reduce the total cost of
network ownership, providing a network growth path for existing and future customers. ADC's
GSM products provide a compact and cost-effective platform, which help lower the cost of
network ownership.
Features
Spec Sheet
Compact integrated MSC, BSC and BTS•
Call forwarding (conditional, unconditional), call waiting, call hold, call transfer•
Generates GSM & ASN.1 compliant CDR records•
Available in 850, 900, 1800 and 1900 MHz frequency bands•
General Packet Radio Service (GPRS) support•
MAP-C, MAP-D•
Dynamic power control (uplink and downlink)•
Built in IN Prepaid, SMSC, AuC and EIR •
External alarms for third party equipment are also supported•
Common hardware modules with UltraWAVE X100, BTS and BS Plus products•
Integrated full rack solution available: UltraWAVE NIB integrated with additional on-site •
equipment such as transmission, battery backup, etc. in one rack
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Page 2
UltraWAVE
GSM Network-In-A-Box
ADC's UltraWAVE GSM Network-In-A-Box product offers the ability to support a complete GSM
network by integrating a mobile switching center (MSC), a base station controller (BSC) and a base
transceiver station (BTS) in a single compact enclosure. The UltraWAVE NIB is designed for rapid
deployment, with compactness suitable for many special applications, and the cost-effectiveness for
very small capacity networks or network extensions. The UltraWAVE NIB can support either a completely
stand-alone GSM network and integrate with existing wireline and wireless network infrastructures or
can be deployed as part of an extension of an existing public land mobile network (PLMN). Its usage
has ranged from remote small coverage areas often with satellite backhaul to enterprise private GSM
networks integrating with private PBXs for military, government and disaster recovery applications. The
NIB is also an excellent tool for GSM developers for their laboratory use and solutions testing.
The UltraWAVE NIB provides switching capacity and mobility management functions within its serving
area. It supports HLR and VLR switch functionality and integrated value added services (VAS) including
IN Prepaid, SMS and authentication center. Additional optional services such as GPRS and voicemail are
supported as well.
UltraWAVE
6/08•105968AE
www.adc.com • +1-952-938-8080 • 1-800-366-3891
2
Page 3
UltraWAVE
UltraWAVE
GSM Network-In-A-Box
FEATURES
Interface Capacity: 90 Erlangs @ 0.1% Grade of Service
Busy Hour Call Attempts: 3600
Total Subscribers: 3600 @ 0.025 Erlang per subscriber
Max Number of Full Rate
Simultaneous connections: Up to 106 (non-blocking)
RADIO
Number of TRXs: 2 internal, 26 total
Number of BTSs: 1 internal; 5 total
Output Power: Variable up to 50 Watts at antenna port
RF Receiver Sensitivity: -111 dBm (without diversity)
-114 dBm (with diversity)
KEY FEATURES: Integrated IN Prepaid, SMSC
Integrated TRAU function
Star or daisy chain configuration
Optional audio announcements and voicemail
Encryption (A5/0, A5/1)
Sectorization supported
GPRS supported (CS-1, CS-2, CS-3, CS-4)
INTERFACES
PSTN: ITU/ANSI ISUP, ITU/ANSI ISDN PRI, R2
MSC/BSC Link: GSM Compliant A Interface;
GSM Spec. 04.08, 08.08; ANSI 1992 CCITT 1988, 1992; BSSMAP,
GSM 08.08 DTAP, GSM 04.07, 04.08,SCCP & MTP GSM spec 08.06
RF Interface: GSM Compliant Um Interface; GSM Spec. 04.06, 04.08, 05.01-
05.05, 05.08 & 05.10; GSM spec 03.64, 04.60 (Rel 98)
BTS Link : Abis Interface, GSM spec. 04.08, 08.58, 12.21
Transmission: G7.03 compliant E1 75/120 Ohm;
T1.403 compliant T1 100 Ohm
Ethernet: 10/100 Mbps Ethernet, RJ-45 connector
Serial Port: RS232, RJ-45 connector
OPERATION
Remote Monitoring: Monitor temperature, PA, fan, PSU, external alarms supported
Access to Equipment: Front loaded cards and modules
Field Support: Modules are field replaceable
POWER SUPPLY
6/08•105968AE
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Input Voltage: 115/230 VAC; -48 VDC
Redundancy: Redundant power supply
Alarm: PSU failure alarm reported OMC
MECHANICAL
Dimensions (HxWxD): 535 x 485 x 410 mm (21 x 19 x 16 inches)
Weight: 57 kg (125 lbs) typical (meets 2 man-lift requirement)
OPERATING ENVIRONMENT
Temperature: -5° to 45°C (23°F to 113°F)
Humidity (non-condensing): 10% to 90%
3
Page 4
Spec Sheet
Website: www.adc.com
FromNorthAmerica,CallTollFree:1-800-366-3891•OutsideofNorthAmerica:+1-952-938-8080
Fax:+1-952-917-3237•ForalistingofADC’sglobalsalesofficelocations,pleaserefertoourwebsite.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
105968AE 6/08 Revision © 2008 ADC Telecommunications, Inc. All Rights Reserved
Loading...