ADC TrueNet Intelligent Patching User Manual
TrueNet® Intelligent Patching
Active Hardware and Software
TrueNet® Intelligent Patching combines our leading connectivity technology with Intelligent
Physical Layer Management providing complete end-to-end, real time control and management
of Enterprise Copper and Fiber Networks.
Supplied through ADC’s fully trained and approved TrueNet Value Added Resellers, the TrueNet
Intelligent Patching solution comes with the TrueNet warranty, featuring an additional zero bit
error warranty offering you complete peace of mind.
The active hardware is configured in a hierarchical layout and is the interface between the
Intelligent Patch Panels, providing the management software with all relevant data to scan
connectivity changes within the physical layer.
The TrueNet Intelligent Patching Master is always at the apex of the hierarchy, connecting with
Expanders and Scanners. In addition, the Master also includes the SNMP agent to gather data
on all IP devices connected to the network.
Rack Indicators and Indicator Controllers are used to identify racks in larger communication
rooms, to assist with the work order process or any other maintenance operations.
Features:
Spec Sheet
Benefits:
Location based service provisioning •
and deployment
Real time asset tracking and reporting•
Event monitoring, vulnerability assessments •
and reporting in-line with legislative
requirements
Complete physical layer monitoring•
www.adc.com +1-952-938-8080 1-800-366-3891
Error free, centrally managed moves, adds •
and changes.
100% asset utilization, scan and reclaim •
available capacity on or off site.
Detection and alerts to any authorized or •
unauthorized event across the network.
Connection based security across the entire •
physical layer.
TrueNet® Intelligent Patching
Active Hardware
Specifications (Excludes 6527 1 736-00)
MECHANICAL
Panel Rack Mounting: 1U 19" (IEC 60297)
Panel Dimensions: 44 mm x 483 mm x 160 mm deep
Weight: 2.0Kg (4.4lbs)
INTERFACES
UP/DOWN LINKS: Standard RS-485, Full – duplex connector shielded RJ-45 socket
Data rate up to 115.2 Kbps
100Base TX: RJ-45 socket, Ethernet IEEE 802.3, 100 100Base Tx/10Base T,
100/10 Mbps industry standard for connection to local area network.
Serial: RS-232 Connector 9-pin D-type male
Data rate up to 115.2 Kbps
Protocol UART, Start bit 1, Stop bit 1, Nonparity
Control Pad: Connector RJ-45 socket, 8 pins
Patch Panel Connections: Connectors 6 or 12 headers, 26-pin, 100mm spacing
LED INDICATORS (WHERE USED)
PWR: On when scanner is powered
CPU: Blinking to indicate master heartbeat
DOWN LINKYELLOW: On during transmission of each of the DOWN LINK ports
DOWN LINKGREEN: On during reception of each of the DOWN LINK ports
100Base Tx – Rx: On during reception from local area network
100Base Tx – Tx: On during transmission to local area network
100Base Tx LINK: On when link is active
Intelligent Patching
®
TrueNet
10/08 104854AE
ENVIRONMENTAL & SAFETY
Operating temperature range: 0° C - +50° C
Operating humidity range: ≤ 90% RH non-condensing
Safety: UL 60950, EN 60950
EMC: EN 55022, FCC part 15 Class A, EN 55024
Power: 100 – 240 VAC, 47 – 63 Hz, 30 W maximum
Ordering Information
Description Catalog Number*
Intelligent Patching Scanner 6527 1 730-00
Intelligent Patching Master 4 Ports 6527 1 733-00
Intelligent Patching Master Expander 6527 1 732-00
Intelligent Patching Expander 6527 1 734-00
Intelligent Patching Indicator Controller 6527 1 735-00
Intelligent Patching Control Pad 6527 1 736-00
Intelligent Patching Mini Scanner 6527 1 739-00
Intelligent Patching Network Scanner 6527 1 741-00
Intelligent Patching Rack Indicator 6527 1 737-00
Intelligent Patching Scanner Attachment Cord Copper UTP 6527 1 750-XX
Intelligent Patching Scanner Attachment Cord Fiber 6527 1 751-XX
*Replace XX with: 1.5 m = 51, 2.5 m = 52, 6 m = 06, 12 m = 12
www.adc.com +1-952-938-8080 1-800-366-3891
2
Loading...