ADC SL20 Gen II User Manual

SL20 Gen II

Parts Manual

Phase 7

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: [phone] / Fax: [phone]

E-mail: [e-mail]

www.amdry.com

ADC Part No. 450599 - 2

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety . If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONL Y qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included
with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to
make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.

POUR VOTRE SÉCURITÉ

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________________________________ MODEL NO. ______________

RESELLER’S NAME _________________________________________________________________________________

Serial Number(s)_____________________________________________________________________________________

SL20 PH7

____________________________________________________________________________________________________

____________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory . When ordering replacement part s from the
factory , you can FAX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department
at [phone]. Please specify the dryer model number and serial number in addition to the description and part
number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly . The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORT ANT NOTE T O PURCHASER”

Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructions must be posted in a prominent location near the dryer.

Table of Contents

Phase 7.3 Non-Coin T op Panel Assembly for Top Control Models...............................................................................4

Phase 7.5 Non-Coin T op Panel Assembly for Top Control Models...............................................................................5

Front Panel Assemblies..............................................................................................................................................6

Phase 7.5 Non-Coin Bottom Panel Assembly for Bottom Control Models...................................................................7

Phase 7.3 Non-Coin Bottom Panel Assembly for Bottom Control Models...................................................................8

Phase 7.3 Coin Top Panel Assembly for Top Control Models......................................................................................9

Phase 7.3 Coin Bottom Panel Assembly for Bottom Control Models ........................................................................10

Main Door Assemblies.............................................................................................................................................. 11

Middle Front Panel Assembly...................................................................................................................................12

Lint Drawer Assembly for Models Mfd. as of July 29, 2005 .......................................................................................13

Lint Drawer Assembly for Models Mfd. prior to July 29, 2005.................................................................................... 14

Tumbler Assembly for Models Mfd. as of May 2004..................................................................................................15

Tumbler Assembly for Models Mfd. prior to May 2004...............................................................................................16

Rear Support Panel Assembly..................................................................................................................................17

Front Tumbler Wheel Assemblies ............................................................................................................................. 18

Rear Tumbler Wheel Assemblies .............................................................................................................................. 19

Fire Suppression System Piping Assembly ..............................................................................................................20

T emperature Sensor Assemblies...............................................................................................................................21

Motor Drive Assembly ...............................................................................................................................................22

Direct Sp ark Ignition Burner Assembly......................................................................................................................24

Lint Box / Blower Motor Assembly............................................................................................................................26

Electric Oven Assembly............................................................................................................................................ 28

Blower Assembly ......................................................................................................................................................29

Blower Motor Assembly ............................................................................................................................................30

Front Electrical Panel Assembly...............................................................................................................................31

Sail Switch Assembly ...............................................................................................................................................32

Base / Top / Sides / Back Guard Assemblies...........................................................................................................33

Pedestal Box Option.................................................................................................................................................34

Additional Parts Available .........................................................................................................................................35

Phase 7.3 Non-Coin Top Panel Assembly

For T op Control Models

Illus. No. Part No. Qty . Description

1 112579 1 Phase 7 Keypad
2 137250 1 Phase 7 Ribbon Cable
3 137270 1 Large Character Display
4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
5 153010 4 #6 Star Washer
6 887012 1 Phase 7.3.2 Board with a Fire Suppression System

(for models mfd. as of January 22, 2004)

887009 1 Phase 7.3.2 Board with a Fire Suppression System

(for models mfd. prior to January 22, 2004)
7 818482 1 Black Control Panel
8 ––––––* 1 Logo ONLY
9 818206 1 Magnetic Switch

* Contact reseller for logo.

4 American Dryer Corporation 450599 -2

Phase 7.5 Non-Coin Top Panel Assembly

For T op Control Models

Illus. No. Part No. Qty . Description

1 112580 1 Phase 7.5 Non-Coin Keypad
2 153010 3 #6 Star Washer
3 150005 3 #6-32 x 1/4” Phillips Round Head Machine Screw
4 887020 1 Phase 7.5 Non-Coin Board with a Fire Suppression System
5 818463 1 Non-Coin Top Control Panel
6 818206 1 Magnetic Switch

450599 -2 www.amdry.com 5

Front Panel Assemblies

Illus. No. Part No. Qty . Description

1 818478 1 Top Control Panel for Bottom Controls
2 ––––––* – Logo ONLY
3 818466 1 Front Bottom Panel Assembly for Top Controls

* Contact reseller for logo.

6 American Dryer Corporation 450599 -2

Phase 7.5 Non-Coin Bottom Panel Assembly

For Bottom Control Models

Illus. No. Part No. Qty . Description

1 112580 1 Phase 7.5 Non-Coin Keypad
2 887020 1 Phase 7.5 Non-Coin Board with a Fire Suppression System
3 153010 3 #6 Star Washer
4 150005 3 #6-32 x 1/4” Phillips Round Head Machine Screw
5 818465 1 Phase 7.5 Non-Coin Bottom Control Panel

450599 -2 www.amdry.com 7

Phase 7.3 Non-Coin Bottom Panel Assembly

For Bottom Control Models

Illus. No. Part No. Qty . Description

1 112579 1 Phase 7.3 Keypad
2 137270 1 Large Character Display
3 818436 1 Non-Coin Bottom Control Panel
4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
5 153010 4 #6 Star Washer
6 887012 1 Phase 7.3.2 Board with a Fire Suppression System

(for models mfd. as of January 22, 2004)

887009 1 Phase 7.3.2 Board with a Fire Suppression System

(for models mfd. prior to January 22, 2004)
7 137250 1 Ribbon Cable

8 American Dryer Corporation 450599 -2

Phase 7.3 Coin Top Panel Assembly

For T op Control Models

Illus. No. Part No. Qty . Description

1 137270 1 Large Character Display
2 883774 1 Optic Switch
3 153010 4 #6 Star Washer
4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
5 112579 1 Phase 7.3 Coin Keypad
6 137250 1 Phase 7.3 Ribbon Cable
7 887011 1 Phase 7.3.2 Board without a Fire Suppression System

(for models mfd. as of January 22, 2004)

887012 1 Phase 7.3.2 Board with a Fire Suppression System

(for models mfd. as of January 22, 2004)

887009 1 Phase 7.3.2 Board with a Fire Suppression System

(for models mfd. prior to January 22, 2004)
8 884029 1 25¢ US Optic Coin Acceptor
9 818467 1 Black Control Panel
10 818132 1 Coin Vault for Top Control
11 818206 1 Magnetic Switch
12 818500 1 Coin Vault Bracket
13 150511 1 1/4-20 x 1” Tap Bolt
14 150300 4 #10-16 x 1/2” Hex Washer TEK Screw
15 153000 8 #8 Flat Washer
16 153012 8 #8 Star Washer
17 152015 8 #8-32 Hex Nut

450599 -2 www.amdry.com 9

Phase 7.3 Coin Bottom Panel Assembly

For Bottom Control Models

Illus. No. Part No. Qty . Description

1 137270 1 Large Character Display
2 883774 1 Optic Switch
3 153010 4 #6 Star Washer
4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
5 112579 1 Phase 7.3 Coin Keypad
6 137250 1 Phase 7.3 Ribbon Cable
7 887011 1 Phase 7.3.2 Board without a Fire Suppression System

(for models mfd. as of January 22, 2004)

887012 1 Phase 7.3.2 Board with a Fire Suppression System

(for models mfd. as of January 22, 2004)

887009 1 Phase 7.3.2 Board with a Fire Suppression System

(for models mfd. prior to January 22, 2004)
8 884029 1 25¢ US Optic Coin Acceptor
9 818424 1 Black Control Panel
10 818422 1 Coin Vault for Bottom Control
11 153049 2 13/64” x 7/8” Flat Washer
12 153024 2 #10 Lock Washer
13 152015 2 #8 Hex Nut
14 153049 2 13/64” x 7/8” Flat Washer
15 153012 8 #8 Star Washer
16 152015 8 #8-32 Hex Nut

10 American Dryer Corporation 450599 -2

Illus. No. Part No. Qty . Description

1 883824 1 Door Pan with Glass
2 818832 1 Door Assembly Complete (right hinge) Stainless Steel

(for models mfd. as of October 25, 2004)
(includes illus. nos. 1 through 13)

818830 1 Door Assembly Complete (right hinge) White

(for models mfd. as of October 25, 2004)
(includes illus. nos. 1 through 13)

818833 1 Door Assembly Complete (left hinge) Stainless Steel

(for models mfd. as of October 25, 2004)
(includes illus. nos. 1 through 13)

818831 1 Door Assembly Complete (left hinge) White

(for models mfd. as of October 25, 2004)
(includes illus. nos. 1 through 13)

818562 1 Door Assembly Complete (right hinge) Stainless Steel

(for models mfd. prior to October 25, 2004)
(includes illus. nos. 1 through 13)

818689 1 Door Assembly Complete (right hinge) White

(for models mfd. prior to October 25, 2004)
(includes illus. nos. 1 through 13)

818561 1 Door Assembly Complete (left hinge) Stainless Steel

(for models mfd. prior to October 25, 2004)
(includes illus. nos. 1 through 13)

3 102348 1 Inner Door Gasket

(for models mfd. prior to October 25, 2004)
4 151016 4 #8-32 Acorn Nut
5 150322 8 #6 x 1/2” Self-Drilling Screw
6 102314 1 Outer Door Gasket

401010 1 Adhesive for Door Gasket (5 oz. tube) … Not Illustrated
7 153000 4 #8 Flat Washer
8 153012 4 #8 Star Washer
9 150327 2 #6 x 1/2” Phillips Flat Head Screw
10 887175 1 Silver Door Handle

819838 1 White Door Handle
11 103067 2 Door Hinge

(for models mfd. as of November 20, 2003)

884134 2 Door Hinge

(for models mfd. prior to November 20, 2003)
12 150328 2 1/4-20 x 1” Stainless Steel Phillips Head Screw
13 170608 1 Magnet

Main Door Assemblies

450599 -2 www.amdry.com 11