ADC RS-422 User Manual
UniPatch® Modular System
UniPatch® System Overview ................................................86
UniPatch
UniPatch
GigE ............................................................................... 88
RS-422 ...........................................................................89
Bantam Audio ................................................................90
Video ............................................................................. 91
AES Balun ......................................................................92
®
Backplane Options ..............................................87
®
Module Options
UniPatch
www.adc.com • +1-952-938-8080 • 1-800-366-3891
85
UniPatch® Modular System
Overview
Video
RS-422 Data
The UniPatch® modular patching system with universal chassis allows you to combine data, audio,
and video patching modules in a single two-rack-unit modular panel. Order a mix of jack and backplane
modules to create a totally custom patching system, or order a preconfigured panel RS-422 data jacks.
You can start with only a few modules and add or change modules as needed. The universal chassis
with mix-and-match jack and backplane modules provides the ultimate in flexibility.
Midsize Video
Loaded UniPatch Chassis
Bantam Audio
Video RGBS
RGB
UniPatch
Modular Chassis for
Unprecedented Flexibility
Features
Broadcast and Entertainment Products
Jacks and backplanes have a modular design •
and t into the rugged high-density card cage
chassis. Just plug in a module to add more
jacks or backplane connectors
Modularity lets you start small and add •
modules and cards as needed
Individual circuits are easily replaced without •
disturbing other circuits
Backplanes available in high-density 64-circuit •
bantam audio, high-density 32-port data,
standard-density 24-port data, and video
options
Gold-plated card edge connectors tested to •
withstand heavy use and vibration
Shallow 7" deep chassis is perfect for •
mobile applications
Mix-and-Match
Plug-in Jack Modules
The following modules (details on following pages)
may be assembled on site in mix and match
combinations. Data and bantam modules may be
ordered in a fully loaded preconfigured chassis.
Features
Category 3 compliant RS-422 modules •
for demanding professional data patching
applications
Bantam audio modules in user-selectable •
normalled congurations
Video modules for analog, SD, HD, and •
analog component
AES 110 • W to 75 W coaxial baluns
BNC bulkhead feedthroughs•
Category 5, 5e and 6 data patching•
5/08 • 102117AE
www.adc.com • +1-952-938-8080 • 1-800-366-3891
86
UniPatch® Modular System
Backplane Options (mix-and-match)
Ten different backplane connector types are available, and because they come in modular units, they
can be mixed and matched like the jack modules. Each backplane supports up to eight jack modules.
Features
Available modules:•
Dsub9 connectors –
AMP Champ 50-pin receptacle –
EDAC 3-pin plug –
EDAC 90-pin plug –
QCP MKII for data 20x8 –
QCP MKII for audio 12x8 –
Broadcast and Entertainment Products
Dsub9, RS-422
Rear Module
(for data)
(VPRM-D9-W)
EDAC 90-Pin
Rear Module
(for data)
(VPRM-E90-W EDAC)
AMP 50-Pin Receptacle
Rear Module
(for data)
(VPRM-A50-W)
QCP MKII
Rear Module
(for data)
(VPRM-MKII-W)
UniPatch
EDAC 3-pin
Rear Module
(for audio)
(VPRM-BAN-E3)
QCP MKII
Rear Module
(for audio)
(VPRM-BAN-MKII)
5/08 • 102117AE
www.adc.com • +1-952-938-8080 • 1-800-366-3891
87
Unipatch Modular Systems
GigE Modules
Gigabit Ethernet Jack Module
Features:
Dense pack patching •
Minimum of 30,000 patch cycles•
Normal-through patch by exception•
Modular design (can be removed without •
disturbing adjacent circuits)
Gold-plated contacts on switches and card •
edge connectors
Keyed opening for proper patch cord •
orientation
LSA-PLUS® 8-Circuit Backplane Module
DM-GIGE
UniPatch
Features:
Broadcast and Entertainment Products
Note: For complete configuration and ordering
Patented LSA-PLUS•
modules can be removed individually for
easier wiring
Number designation labels included•
Designation strip and window included for •
custom labeling
Designed for solid or stranded wire•
Eliminates the need for additional connectors •
and connector labor
information, please refer to Data Section.
®
termination system
VPRM-GIGE-LSA
(rear view)
5/08 • 102117AE
www.adc.com • +1-952-938-8080 • 1-800-366-3891
88
Loading...