LoopStar® 1600
SONET Multi-Service Transmission Platform
The LoopStar® 1600 is an advanced, next-generation SONET multi-service transmission platform
that allows service providers to cost-effectively aggregate, deploy, and manage TDM and Ethernet
services. With its compact design and ability to scale from an OC-3 to an OC-192 network, the
LoopStar 1600 provides a low-cost, high-growth solution for adding services at the central office
or at the edge of the network.
When used with the LoopStar 800 or LoopStar 810 products, the LoopStar 1600 provides
a cost-effective aggregation point for multiple subtending rings. The LoopStar 1600 also can
function as multiple virtual Add-Drop Multiplexers (ADMs) for hub node applications. In addition,
with its versatile cross-connect architecture and high port count, this platform is an efficient
alternative to existing cross-connect systems that require significantly more rack space at two
to three times the cost.
Benefits:
Spec Sheet
Aggregates and delivers TDM and Ethernet •
services over a single transport platform.
Provides efficient support for •
point-to-point, point-to-multipoint,
or multipoint-to-multipoint traffic.
Supports network interfaces from an •
OC-3 to OC-192 and tributary interfaces
from OC-3 to OC-48.
Scales Ethernet services from sub 10BaseT •
rates up to Gigabit Ethernet using QoS in
conjunction with EoS features.
Offers modular slot design to grow the •
network cost-effectively and add services
when required.
Provides multiple network protection •
schemes including UPSR, BLSR, and LAPS.
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Prevents tributary card failures from affecting •
customer traffic with economical n:1
tributary card protection.
Protects equipment (cross-connections and •
management) with redundant cross-connect
and management cards.
Reduces CAPEX by providing MADM and •
3/1 DACS functionality in a single platform.
Provides sufficient traffic grooming •
capabilities to reduce the need for
costly DACs ports.
Utilizes the same management systems as •
those for the LoopStar 800/810: LoopStar
SONET EMS, LoopStar SONET EMS LCT,
LoopStar SONET Web-based LCT.
LoopStar® 1600
SONET Multi-Service Transmission Platform
Features
Software selectable network protection offers •
support for UPSR, BLSR, or Linear 1+1 (LAPS).
EoS (GFP, low order VCAT, and LCAS) allows for •
more efficient use of SONET bandwidth without
affecting the existing infrastructure.
VLAN support with 802.1Q-in-Q allows for •
transparent transport of customer VLANs,
simplifying the management of customer
Ethernet traffic.
Supports the following Ethernet business services: •
EPL, EVPL, EPLAN, EVPLAN.
M13 and transmux support enables efficient use •
of network resources without sacrificing traffic
1600
routing capabilities.
®
Space-Saving Design
The compact 3 RU (5.25” x 17” x 12”) LoopStar 1600 allows for ease of installation in tight rack
spaces in central office environments. As OC-48 access networks become more prevalent, this product’s
compact design will support customer premises applications as well.
LoopStar
Line Card Options
High-density support for DS1, DS3, OC-3, •
and OC-12 tributaries provides a cost-effective
aggregation point for access networks.
Flexible n:1 protection for DSn interfaces •
promotes further operational cost savings.
3 RU design allows for central office or customer •
premises deployments.
Low power consumption (160W typical) saves •
on operation expenses.
Cross-connect matrix and management function •
is provided on one integrated card, reducing both
capital and operational expenses.
Most tributary cards are interchangeable with •
the LoopStar 800, reducing spare inventory.
Two card slots for management, control, •
and cross-connect functionality
Eight service interface slots for network or •
tributary card use: OC-192 (slots 1-2 only),
OC-48, OC-12, OC-3, DS3, DS1, 10/100,
100FX or Gig-E
OC-3 line card options for 1, 2, 4, or 8 ports•
OC-12 line card options for 1, 2, or 4 ports•
All optical interfaces support UPSR, BLSR, •
or LAPS configurations
Flexible DS1 and DS3 protection switching •
schemes, 1:4 for DS1 and 1:3 for DS3 or
10/07•102812AE
1:1 for DS1 and 1:1 for DS3
DS1 line card options for 14 or 28 ports•
DS3 line card options for 3, 6, or 12 ports •
Multiple Input/Output back-plane panels for •
DS1 and DS3 line card options (DS1 only,
DS3 only, or DS1 and DS3 combo)
Ethernet line card options for 8 port 10/100BT, •
2 port Gig-E, or a combination of 4 port
10/100 with 1 port Gig-E
BITS and loop timing options for redundancy•
www.adc.com • +1-952-938-8080 • 1-800-366-3891
2
LoopStar® 1600
SONET Multi-Service Transmission Platform
Ordering Information
Description Catalog Number
LoopStar 1600 Chassis Assembly LPS-FRM1600-L1
Cross-connect & System Control & Timing Board LPS-I1AXCS
Cross-connect & System Control & Timing Board (High Order) LPS-IXCSSTS
OC-192 Optical Interface Unit (IR-2, LC) 40km LPS-OC19202
OC-192 Optical Interface Unit (LS-64.2, LC) 80km, without BA LPS-OC19203
OC-192 Optical Interface Unit (40 wavelength, 100G, G.692) LPS-OC192W
OC-48 Optical Interface Unit LPS-OC480x
OC-48 Optical Interface Unit (SR-1, LC) LPS-OC4804
OC-48 Optical Interface Unit (IR-2, LC) LPS-OC4805
OC-48 Optical Interface Unit (100KM, LC) LPS-OC4806
1600
®
LoopStar
10/07•102812AE
4xOC-12 Optical Interface Unit LPS-OC12Q0x
2xOC-12 Optical Interface Unit LPS-OC12D0x
OC-12 Optical Interface Unit LPS-OC120
8xOC-3 Optical Unit LPS-OC30z
4xOC-3 Optical Interface Unit LPS-OC3Q0x
2xOC-3 Optical Interface Unit LPS-OC3D0x
OC-3 Optical Interface Unit LPS-OC30x
2x1000Base-FX Ethernet Board (Transparent, without GE SFP module) LPS-EGT2H
8x100Base-T Ethernet Board LPS-EFS8
14xDS-1 Mapper Board LPS-PLT101
28xDS-1 Mapper Board LPS-PDT101
3xDS-3 Mapper Board LPS-PLT301
6xDS-3 Mapper Board 1600 only LPS-PDT301
6xDS-3 Mapper Board (Transmux) LPS-PDM301H
12xDS-3 Mapper Board LPS-PQT3A01
Faceplate Front LPS-FF
56xDS1 Electrical Interface Board LPS-PQI101
12xDS3 Electrical Interface Board LPS-PQI301
12xDS3 Electrical Interface Board (1:1 protection only) LPS-PQSI301
24xDS3 Electrical Interface Board MINI-BNC LPS-POI301
28xDS1+6xDS3 Electrical Interface Board LPS-PDI1301
Faceplate(rear) for 1600 LPS-BF
SFP 1310nm SM (10km) for Gigabit Ethernet Interface LPS-SFP1310
SFP 1340nm SM (40km) for Gigabit Ethernet Interface LPS-SFP1340
SFP 1510nm SM (10km) for Gigabit Ethernet Interface LPS-SFP1510
SFP 1540nm SM (40km) for Gigabit Ethernet Interface LPS-SFP1540
SFP 850nm MM (850m) for Gigabit Ethernet Interface LPS-SFP85
Note: x = 1, 2, 3 (where 1 = 15 km, 2 = 40 km, 3 = 60 km)
z = requires SFPs
www.adc.com • +1-952-938-8080 • 1-800-366-3891
3
Specifications
Cross-connect capabilities: 768 x 768 STS-1
336 x 336 / 2688 x 2688 VT1.5
INTERFACE CAPACITIES
TDM: 112 x DS1/Shelf
48 x DS3/Shelf
SONET: 48 x OC-3/Shelf
32 x OC-12/Shelf
8 x OC-48/Shelf
2 x OC-192/Shelf
Ethernet: 48 x 10/100 Mbps Ethernet/Shelf
12 x Gigabit Ethernet/Shelf
Networking Topologies: Terminal
Linear ADM
Ring and multi-Ring
Mesh
Service protection: Linear-APS
UPSR, BLSR (Optional)
DNI (Dual Node Interconnection)
FSVP (Fiber Shared virtual path protection)
Equipment protection: 1+1 protection of cross-connect, system control
and timing Dual Power feeds
1: N (N <= 4) DS1 protection
1: N (N <= 4) DS3 protection
Network management: TL1, Web-based LCT
SNMP
LoopStar Element Management System
IP DCC and 4 layer OSI over DCC
Ethernet features: HDLC/X.86/GFP encapsulation
STS-1 & VT1.5 VCAT, LCAS, 802.1Q VLAN/QinQ
L2 switching with STP/RSTP, MPLS VPN
Power consumption: 350W (maximum load configuration)
<150W (Typical)
PHYSICAL
Dimensions (HxWxD): 5.2" (3RU) x 17.2" x 12"
Weight: <33 lbs (15 kg) (full configuration)
Operating Temperature: 23°F to 131°F (-5°C to 55°C)
Operating Humidity: 5% to 95%
Standards Compliances: NEBS Level 3 Certified
Telcordia GR-253, GR-1089 and GR-63
UL 60950
Spec Sheet
Website: www.adc.com
FromNorthAmerica,CallTollFree:1-800-366-3891•OutsideofNorthAmerica:+1-952-938-8080
Fax:+1-952-917-3237•ForalistingofADC’sglobalsalesofficelocations,pleaserefertoourwebsite.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
102812AE 10/07 Revision © 2005, 2006, 2007 ADC Telecommunications, Inc. All Rights Reserved
Loading...