XPG SX6000 Pro PCIe Gen3x4 M.2 2280 Solid State Drive
Boot, load, and transfer faster with the XPG SX6000 Pro PCIe Gen3x4 M.2 2280 solid state drive (SSD).
With support for NVMe 1.3 and equipped with 3D NAND Flash, it offers up to 4 times faster performance
than SATA SSDs and up to 2TB of capacity. What’s more, the SX6000 Pro is slimmer than standard M.2
2280 SSDs for a higher level of compatibility thanks to its single-sided design.
● Ultra-fast PCIe Gen3x4 interface:
R/W speed up to 2100/1500MB/s
● 3D NAND Flash for higher capacity and
● Advanced LDPC ECC Technology
● HMB (Host Memory Buffer) and SLC Caching
● Single-sided design – 2.15mm thick
● Compact M.2 2280 form factor – ideal for
gaming notebooks and high-end desktops
● Capacities: 256GB / 512GB / 1TB / 2TB
● Power Consumption: 0.33W Active (Typical),
0.14W Slumber (Typical) (*measured by power meter)
● Operating Temperature: 0°C~70°C
● Storage Temperature: -40°C~85°C
● Shock Resistance: 1500G/0.5ms
● Dimensions (L x W x T): 80 x 22 x 2.15mm
● Certifications: RoHS, CE, FCC, BSMI, VCCI, KC
● Warranty: 5-year limited
CDM
(QD32)
Seq.
Read
(MB/sec)
CDM
(QD32)
Seq.
Write
(MB/sec)
AS SSD
Seq.
Read
(MB/sec)
AS SSD
Seq.
Write
(MB/sec)
*Performance may vary based on SSD capacity, hardware test platform, test software, operating system and other system
variables
Schematics