Adastra IW415B User Manual

IW415B

In-wall Bluetooth Quad Amplifier

Item ref: 953.095UK

User Manual

Version 1.0

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

953.095UK User Manual

Introduction

Thank you for choosing the Adastra IW415B in-wall quad amplifier for your discreet audio
installation. This unit is designed to power wall or ceiling mounted speakers and receive
audio via Bluetooth. Please read this manual to gain the best results from your product and
avoid damage through misuse.

SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE NE PAS

OUVRIR

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within this unit

This symbol indicates that there are important operating and maintenance instructions in

the literature accompanying this unit.

Warning

To prevent the risk of fire or electric shock, do not expose any components to rain or moisture. If
liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by
qualified personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case.

No user serviceable parts inside – Do not open the case – refer all servicing to qualified service
personnel.

Safety

• Check for correct mains voltage before connecting the power adaptor

• Use only the power adaptor provided or an identical replacement

Placement

• The IW415B can be installed in a ceiling or stud wall to power flush or surface mount speakers

• The IW415B can also be surface mounted if necessary

• Ensure adequate ventilation for cooling and keep away from combustible material or moisture

• Ensure that the IW415B is within Bluetooth connection range of the sending device

Cleaning

• Use a soft cloth with a neutral detergent to clean the housing as required

• Use a vacuum cleaner to clear apertures and controls of any dust or debris build-ups

• Do not use solvents for cleaning the unit