Adams Rite MS4043-02-130, MS4043-02-121, MS4043-02-119, MS4043-01-130, MS4043-01-121 Specsheet
...
CYLINDERS
MS4043 CYLINDER GUA RD
Specifications
C-5
MS4043
Cylinder Guard
HOLLOW
METAL
The MS4043 Cylinder Guard is a hardened-steel ring to
protect cylinder from vandalism.
Function
The standard mortise cylinder is made of brass. It is literally a soft spot in narrow
stile door security. Using special pliers, a pipe wrench or other leverage device, a
burglar can tear the cylinder out of the door, leaving an opening through which to
operate the deadlock. Against this problem, the MS4043 Cylinder Guard offers a
three-way defense: 1.The outer shield ring is fully beveled to offer poor purchase
for either prying or twisting. 2. This ring is hardened steel so that the combination
of shape and hardness make it virtually impossible to grip, even with sharpened
tools. 3. In the event that a prying tool such as a cold chisel can be driven into the
stile behind the shield ring, the would-be burglar is obliged to pull a heavy steel
plate through a round hole in the 1/8" metal door stile. This degree of leverage is
far beyond that available with most hand tools.
ALUMINUM
SECURITY RING
• Made of hardened steel. Free-swiveling when properly
installed.
RETAINER RING
• Hardened steel, plated for corrosion resistance. Permits
security ring to swivel.
TRIM FINISH
• Powdercoat to match 130 (Aluminum Satin), 121 (Dark
Bronze), and 119 (Black).
OPTIONS
• MS4043 Cylinder Guard fits a standard 1/8" stile wall. For
1/4" thick stile walls, specify MS4043-01.
STA N DA R D PAC K AG E
• Individually packaged with spacers for flush fitting in
thin stile walls. Cylinders available separately. Shipping
weight: 1/8 lb.
ARM-014-9/14
22- 0947
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
C-6
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
MS4043 CYLINDER GUA RD
CYLINDERS
Dimensions Stile Preparation
3/8"
9.5
mm
1-15/32"
37.3mm
1-9/32"
32.5
STILE WALL
5/8"
15.9mm
mm
23/32"
18.3
mm
CYLINDER LENGTH
(INCLUDING CAM)*
*Contact factory regarding
non-standard dimensions
7/16"
11.1mm
1-1/2"
38.1mm
DIA.
MINIMUM
CYLINDER
CAM TO
SHOULDER*
1-5/8"
41.3mm
DIA.
LOCK FACE
CUTOUT
LOCK
BACKSET
1-11/32"
34.1mm
DIA.
Installation
FACE “OPEN” SIDE OF RETAINER TOWARD
MINIMUM CLEARANCE DIRECTION (TOWARD
NOSE OF DOOR ON 7/8” OR 31/32” BACKSET
LOCKS, AWAY ON 1-1/8” BACKSET).
RETAINER
RING
NOTE:
Guard may be used on outside only
or on both outside and inside of a
double-cylinder lock.
MS4043 CYLINDER GUARD
Specify quantity and the following information. Order related products separately.
PRODUCT NO. STILE WA LL & CYLIND ER FINISH
MS4043 -01 -130
Stile Wall Cylinder 119 To match 335 Black Anodized
00 1/8"
01 1/4"
02 1/8"
5 or 6 pin
5 or 6 pin
1.31” to 1.435” long
121 To match 313 Dark Bronze Anodized
130 To match 628 Clear Anodized
SECURITY RING
(HARDENED STEEL)
SPACER(S) TO FIT
STILE WALL IF THINNER
THAN NORMAL
1/8"
3.2mm
OR
1/4"
6.4mm
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlocks Deadlatches Flushbolts Exit Devices
1830, MS1837, MS1850S(-050), MS1850SN(-050), MS1861,
1875, MS+1890, MS1950(-050), 2190, 2290
4300, 4510, 4530, 4900,
4920AN
1870, 1870HM 8300, 8400
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Loading...