Adams Rite EX76-L313, EX76-L313M, EX76-L335, EX76-L335M, EX76-L628 Specsheet
...
EX76
Concealed Vertical Rod Exit Device
The EX76 CVR Exit Device is designed for narrow stile aluminum
applications that require a life-safety exit device with concealed
vertical rods for two-point locking. The EX76 design features
easily adjustable concealed rods and latching assembly
designed for easy installation, maintenance, and adjustment.
Function
When the door closes, the latching assemblies extend into the header and threshold,
locking the door at two points. When the active pushbar is depressed, both the
top and bottom latching assemblies are retracted, allowing the door to open.
Designed for use on single or pairs of doors. Suitable for low, medium
and high trac areas on aluminum and hollow metal applications.
EX76
Concealed
Vertical Rod
Exit Device
105
EXIT DEVICES
Certifications
UL 305 Panic Hardware
Features
Materials
Active pushbar and back bar made of extruded
aluminum. Matching metal angled end caps.
Handing
Device is non-handed.
Door Thickness
Suits 1-3/4" standard, up to 2-3/4" door
thickness. Thick door kit required when
used with cylinder in doors over 1-3/4".
Door Height
• Standard unit adjustable to maximum
96" door height with device mounted at
34" centerline above finished floor, up
to 62" above the selected bar height.
• Tall door kit required when used in doors
taller than 96". Maximum door height 120".
• Bolt projection easily adjustable. Projection
will change 1/8" for every 3 full rotations
of the bolt, to a maximum of 5/8" throw.
Stile Width
Minimum 2-1/2" stile. Fits narrow, medium
and wide stile aluminum doors.
Stile Wall
Suitable for doors with up to
3/16" stile wall thickness.
Bar Height
Standard model adjusts from 34"
to 44" above finished floor.
Projection
2-1/2" when fully projected,
1-3/4" when dogged.
Dogging
Standard dogging with 3/16” hex key.
Fasteners
Device mounted using standard type ‘F’ selftapping screws and machine screws. Hardware
is not visible from back when installed.
Adhesive templates for mounting included.
Copyr ight © 2018, Hanc hett Entry Sys tems, Inc., an AS SA ABLOY Group
compa ny. All righ ts reserve d. Reproduc tion in whole or in par t witho ut the
expre ss written per mission of Hanc hett Entry Sy stems, Inc. is pro hibited.
Patent pending and/or patent assabloydss.com/patents
ARM-014-9/17
800.872.3267 800.232.7329 adamsrite.com
10027 S. 51st Street, Ste 102, Phoenix, Arizona 85044
106
EX76
Concealed
Vertical Rod
Exit Device
EXIT DEVICES
End Caps
Mounting end cap with 1/4"
overlap for cut coverage.
Universal Hardware Kit
Hardeware kit is suitable for aluminum,
hollow metal, and wood door applications.
Strike
• Header strike made of hardened steel.
• When properly adjusted to 1/8”
door gap the supplied curved strike
functions to consistently engage the
bolt, which enhances the reliability
of the door latching function.
Cylinders
• Select any standard 1" to 1-1/4" [25.4 mm
to 31.8 mm] length, 1-5/32" [29.4 mm]
diameter mortise cylinder with MS®
cam such as the 4036 Mortise Cylinder.
Available separately. Cylinders with MS®
cams can be readily obtained from most
cylinder manufacturers. See CYLINDERS
section for cylinder information.
• If key entry operation is required, any
standard mortise cylinder with MS®
cam may be installed using an EX76Escutcheon, available separately.
Tri m
Compatible with Adams Rite 3080 Series
Entry Trim and 3090 Series Entry Trim. See
TRIM section for cylinder information.
Noise Reduction
• Impact bumpers to reduce noise
from the initial device activation
• Return control to dampen the
Options
• Pushbar and back bar available in choice
of 313 Dark bronze anodized, 335 Black
anodized, 628 Clear anodized. Metallic
end caps finished to match exit device.
• Monitor*: Dual signal switch
* Options are field installable or factory installed
sound and control the device
returning to its resting state
• Horizontal and vertical guides decrease
the scraping sound of the active
For more detailed information on any of the
options listed above please see the EX Series
Options on page 109 of this catalog.
push bar on the static back bar
Standard Package
Individually boxed.
Shipping weight
11 lbs [4.99 kg]
Device Length
EXIT DEVICE
LENGTH
Regular (R) 30" – 36" [ 762 mm – 914.4 mm] 24" [609.6 mm] 32-1/8 " [816 mm]
Mid-length (M) 30" – 42" [ 762 mm – 1,066.8 mm] 24" [609.6 mm] 38-1/8" [96 8.4 mm]
Long (L) 42" – 48" [1,066.8 mm – 1,2 19.2 mm] 30" [762 mm] 44-1/8" [1 120.8 mm]
• Device may be field cut to fit opening width between standard
lengths by cutting the back bar and filler plate.
STANDARD DOOR
OPENING WIDTH
ACTIVE PUSHBAR LENGTH
(AS MEASURED WITH END CAPS)
BACK BAR
LENGTH
How to Order & Related Products
EX76 Concealed Vertical Rod Exit Device: Specify quantity and the following information. Order related products separately.
MODEL LENGTH FINISHES DEVICE OPTIONS
EX76 R 628 A
R Regular (36") 313 Dark Bronze Anodized (blank) Standard, no options
M Mid-length (42") 335 Black Anodized M Monitoring
L Long (48") 628 Clear Anodized
RELATED When purchasing this product, please consider the following related products, available separately:
ACCESSORIES CYLINDER TRIM POWER
EX-Mtg Cap Kit, EX-Push Bar Endcap Kit,
EX-Filler Plate, EX-Moni tor, EX-Backbar
628, EX-Pushbar 628, E X-Hex Dog
EX88-Mullion
Operable by either 4036 Mor tise
Cylinder or 8736 Rim Cylinder
depending upon the ANSI/BHMA
functions of the exit device.
3080, 3080E Series Entry Trim, 3090,
3090P, 3090C, A100 Series Keyless Entry
PS-1 Power Supply, 4612
Power Transfer Device, 4605
Transformer, 4603 Rectifier
Loading...