Adams Rite 8300-7030-US32D, 8300-7030-US4, 8300-7036-32DMEC, 8300-7036-US3, 8300-7036-US32D Specsheet

EXIT DEVICES

BHMA TYPE 3

Mortise Exit Device

For Wood & Hollow Steel Doors

3300 Series

FIRE-RATED

8300 Series

LIFE-SAFETY

ED-3

CERTIFICATIONS:

8300 SERIES:

U

Life-Safety Listing

L

®

ANSI/BHMA A156.3 Grade 1
California State Fire Marshall
New York City MEA*

*Consult factory for specific number

3300 SERIES:

U

10C 3-Hour Fire Label

L

®

California State Fire Marshall
New Yo rk City MEA*
Warnock/Hersey Listing for
Fire Doors up to 10 Feet.

Features:

Heavy duty deadlatching
mechanism

Pushbar clad or anodized,
not plated, in a variety of
finishes

Easy to install

Clean, unobtrusive design

Strong, durable construction
for a high level of security

260 Santa Fe Street
Pomona, California 91767
() ()

800 872-3267 Fax: [phone]

www.adamsrite.com

Features & Dimensions

Mortise Exit Device

ANSI/BHMA

Grade 1

Handing

Specify handing and bevel if applicable.
Lever Entry Trim is field reversible.

Pushbar Length

Standard Sizes: Dimensioned for 30",
36", 42" & 48" openings. Standard
width bars can be field cut to the
next smallest opening width.

Door Thickness

Suits 1-3/4" standard. Can be modified
for thicker doors.

Stile Width

/8300

3300 -

*Door construction may require additional
stile width to meet fire ratings and provide
adequate strength.

Minimum 5"*

Projection

2-5/8" when fully projected,
1-5/8" when dogged.

Materials

Pushbar made of extruded aluminum,
clad or anodized in a variety of finishes.

Dogging

Standard dogging with hex key or
cylinder dogging for 8300 Series only.
Electric dogging also available for
3300 and 8300 Series.

Fasteners

Standard self-tapping screws. Optional Sex
Bolt Kits-26-0584 (2 required per device)
Specify finish.

Strikes

Made of stainless steel. Supplied with
exit device. See strike options below.

Cylinders (order separately)
Cylinder x

Fixed Pull:

(Function 03)
Accepts any standard Mortise cylinder.

Entry Lever or Thumbturn:
(Functions 08, 09, 11, 12)

Accepts any standard diameter Mortise
cylinder with MS cam. Accommodates

®

cylinder lengths from 1" to 1-1/4".

Warranty

Five year limited.

AVAILABLE FINISHES

313

335

628

US3

US4

US9

US10

10B

Dark Bronze Anodized

Black Anodized

Clear Anodized

Bright Brass

Satin Brass

Bright Bronze

Satin Bronze

Dark Bronze
(Trim only)

US32

Bright Stainless

US32D

Satin Stainless

Consult factory for special finishes.

Fire Rating:

MODEL

Single Point

3300

3300 Fire-Rated/8300 Life-Safety

Heavy-duty deadlatch fits
ANSI A115.1 standard door
and jamb prep. 2-3/4“
backset.

TYPE

Mortise

RATING

3 Hr.

* May be used with Model 3100 or 3600 with an open back strike.

DOOR

CONSTR.

Hollow Metal

or Wood

MAX. SIZE

SINGLE
DOORS

4'0"x 10'0"

MAX. SIZE

PAIRS, DBL.

EGRESS

8'0" x 8'0"*

Pushbar Dimensions

2-5/8

2-7/16

Fully Projected Dogged

Strikes

A variety of strikes
are available for
different conditions
and applications.

Standard Strike

8360-01

1-5/8

1"

“A”

Extended Lip

8360-xx

Specify
Dim.“A”

Open Back

4009-01

Trim & Function

Mortise Exit Device

ANSI/BHMA Functions:

01 02 03 08

PULL ONLY

WHEN DOGGED

DUMMY TRIM

EXIT

ONLY-

NO TRIM

N/A N/A N/A

KEY RETRACTS

LATCHBOLT

NL

KEY LOCKS

LEVER

CYLINDER TYPE

MORTISEMORTISE MORTISE MORTISE MORTISE

09 11 12 14

KEY LOCKS

KEY LOCKS

LEVER

KEY LOCKS

THUMBTURN

THUMBTURN

NL NL

8300 ONLY

KEY LOCKS

THUMBTURN

8300 ONLY

NL

PAS SA GE SET

-- Night Latch

1.9

3.25

8.10

Modern Model 3081

Fixed Pulls

()

US32 only

11.50

2.75

T ubular

Model 3001

2.31

5.00

Clutch Lever Entry Trim

3.45

8.10

T ubular Model 3082

Thumbturn

11.50

2.75

Model 3002

2.03

Flat

1.9

4.55

5.81

Model 8066

For 8300 only

T raditional Model 3083

Mortise Cylinder

Standard diameter five-pin
unit with MS cam, suitable
for use with Entry Trim on

1.631.63

Rim exit devices. All brass
construction with front
"scalp" available in finishes
628, 313 and 335. Available
in quantity all keyed
different (KD), in pairs (KA2)
or fifty alike (KA50). Any
other make standard

Mortise cylinder with MS
cam can be used to "key in"
with existing systems.

2.91

8.10

®

1.9

4.35

4036-01

®

--

Options & Accessories

Mortise Exit Device

Order by adding suffix to Exit Device in place of hyphen or by separate model number.

MONITOR/SIGNAL SWITCH

M1 - Single Switch
M2 - Dual Switch

A switch in the exit device pushbar
mounted on the hinge end.
Switch can be used to activate
signal light, horn, monitor or other

For all
Adams Rite
Exit Devices

open or normally closed depending upon application. Can be
retrofit in field to existing exit device. Dual switch version offers
redundancy as required by some building codes or the option of
operating a second signaling device.

Specify by adding "M1"or "M2" after exit device model number.

Monitor Kits for upgrading any 3000 or 8000 Series device:
91-0897-01 - Single Switch 91-0897-02 - Dual Switch

devices. Most common
application is to release maglock
when pushbar is depressed.
Switch can be wired for normally

ELECTRIC LATCH RETRACTION

The LR option uses a

solenoid mounted in

pushbar for instantaneous

unlocking and locking of the exit

device from a remote location or access

control device. Because electrical operation of

device is fail-secure, this option can be used on fire-

rated as well as life-safety applications. In the event of a

of PS-LR Power Supply, which will power two exit devices.
(Using an alternate to the PS-LR Power Supply will void warranty).

Specify by adding "LR" after exit device model number. Order
PS-LR Power Supply separately. Order Battery Backup Kit
separately (BBK-LR).

Solenoid Specifications:

16 Amps Inrush/.5 Amps Hold
Solenoids are rated for both intermittent and continuous operation.
Also see 4612 Power Transfer.

power failure device automatically relatches. Requires the use

MONITORED DUMMY PUSHBAR

8099M1 - Single Switch

8099M2 - Dual Switch

8099-00 - Dummy Only

Dummy pushbar with no latch mechanism but with either a single
or dual monitor/signal switch. Most common application is in
conjunction with a maglock where bar is used to turn off magnet
and allow exit from building. Dual switch version allows redundancy
where required by code or the operation of a
with maglock. Specify door type and width when ordering.
Available in all exit device finishes.
The 8099-00 is also available as a non-operating dummy for doors
not requiring an exit device, but where matching trim is desired.
Specify door type, opening width and finish to be matched.

signal device along

ALARMED EXIT DEVICE

Adams Rite

Exit Devices

This option emits a loud alarm to notify management of
unauthorized exit. Will not alter the Life-Safety characteristics of the
exit device in any way. Control of the alarm is by use of a key in any
standard Mortise cylinder with MS cam to arm, disarm, delay or
reset the alarm. Red letters on the bar give a “hands off” warning to
deter accidental actuation.

Battery Operated Alarm

Four AA alkaline batteries power a horn to create a piercing 95
decibel noise for two minutes (or until disarmed) when pushbar is
depressed.

Hardwired Alarm

Can be connected to external horn for louder or remote signal.
Remote monitor LED light can also be wired in, as can a door
position proximity switch. Also accommodates an external delay
switch, such as an outside key switch or pad,
entry. Uses rechargeable nicad batteries connected to 12-24 Volt
AC or DC source. Each bar has its own battery backup system.

Minimum opening width: 36"

Beeps to signal need for new batteries.

®

to allow authorized

CYLINDER DOGGING

For all non-fire rated
Adams Rite Exit Devices

For management control of
dogging. Any standard
15/16" to 1-1/8" long
Mortise cylinder with MS cam can be used in a pushbar prepared at
factory with Cylinder Dogging kit. Cannot be used with Alarm, EL or
LR options.

Specify by adding "C" after exit device model number.

®

ELECTRIC DOGGING

For all Adams Rite
Exit Devices

The "ED" option uses a
holding magnet to keep
the pushbar depressed
(set manually) and the latch retracted. This gives a lower profile exit
device, resulting in less damage and quieter operation. All "ED"
devices include an internal microswitch that signals when the bar is
held in the depressed position, ideal for automatic door operators.
On fire-rated devices, it must be wired through the fire alarm system.
All devices operate at 24VDC,drawing .6 amp, allowing them to
operate with a simple transformer and rectifier.

Note: N

with access control devices such as card reader or keypads.

Specify by adding "ED" after exit device model number (ex. 8 611 ED 36) .

ot to be used as access control element. Specify "LR"

For all

©2008 ADAMS RITE MANUFACTURING CO.