Adams Rite 8099-00-3036-03, 8099-00-3036-04, 8099-00-3036-32, 8099-00-3036-32D, 8099-00-3036-32DMEC Specsheet

Exit DEvicEs

Options &
Accessories
for Exit Devices

Adams Rite Exit Devices can be ordered with electrification
options for standalone access control or integration with
maglocks, card readers, keypads, fire alarms, power door
operators, and other control systems. Different exit device
types have different installation and power requirements.
Please refer to product pages for more information on
all available exit device types, functions, installation
requirements and complete How-to-Order guides.

Silent Electrification Motorized
Latch Retraction

The SE Motorized Latch Retraction option provides near-silent operation for quiet
environments such as hospitals, offices, hotels, and libraries where solenoid-driven
devices would be disruptive. The high speed/low current draw motor (0.4 Amps
inrush current, 0.2 Amps hold current) offers a powerful yet efficient system that
allows for lighter gauge wiring and an energy-saving reduced amperage power
supply. The device also features electric latch retraction with electric dogging which
minimizes hardware projection and noise. The SE option is available with 3000/8000
Series Exit Devices and the RITE Door®.

Order PS-SE Power Supply separately (PS-SE powers two exit devices). Rated for
continuous duty (see POWER). Adams Rite recommends that for optimal

performance all exit devices with the SE option be paired with PS-SE
power supplies.

4612 Power Transfer is available separately for secure and unobtrusive means of
channeling electrical wiring from the door frame into the door itself.

OPTIONS & ACCESSORIES FOR EXIT DEVICES

Electric Latch Retraction

The EL option for rim exit devices and LR option for all other
exit devices (non-rim exit devices) use a solenoid mounted
in pushbar for instantaneous unlocking and locking of the
exit device from a remote location or access control device.
Because electrical operation of device is fail-secure, this option
can be used on fire-rated as well as life-safety applications. In
the event of a power failure, device automatically relocks. Rim
devices with the EL option are available in 12 or 24 VDC, and
can be powered with a simple transformer and rectifier or other
DC power supply.

SolenoidSPeCifiCationSforCvr,Svr,
andMortiSetyPedeviCeS(lroPtion):

16 Amps inrush/ 0.5 Amps hold

SolenoidSPeCifiCationSforriMdeviCeS
(eloPtion):

el-12vdC – 1.5 Amps inrush/hold
el-24vdC – 0.6 Amps inrush/hold

Solenoids are rated for both intermittent and continuous
operation. Only rim exit devices with the “EL” application are
available with mechanical dogging, specify “ELD”

Order PS-LR Power Supply separately for LR option (PS-LR
powers two exit devices). For warranty purposes Adams Rite
recommends that all CVR, SVR, and Mortise type exit devices
with the LR option be paired with PS-LR power supplies. Rated
for continuous duty (see POWER).

Order PS-1 Power Supply separately for EL option
(PS-1 powers two exit devices). Rated for continuous duty
(see POWER).

4612 Power Transfer is available separately for secure and
unobtrusive means of channeling electrical wiring from the door
frame into the door itself.

ED-19

ARM-014-9/14

Alarmed Exit Device

For all Ada ms Rite E xit Devic es

This batter y-operated option emits a loud (95 decibel) alarm to
notify management of unauthorized exit. Alarm is controlled by
a key in any standard Mortise cylinder with MS
disarm, delay, or reset the alarm. Will not alter the Life-Safety
characteristics of the exit device in any way. Red letters printed
on the bar give a “hands off ” warning to deter accidental
activation. Four AA alkaline batteries power twin horns for two
minutes (or until disarmed) when pushbar is depressed. Beeps
to signal need for new batteries. Minimum opening width: 36"

800.872.3267 • Fax [phone]

10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044

www.adamsrite.com

®

cam to arm,

ED-20

OPTIONS & ACCESSORIES FOR EXIT DEVICES

Exit DEvicEs

Request to Exit –
Monitor/Signal Switch

For all Ada ms Rite E xit Devic es

M1 – Single Switch

M2 – Dual Switch

Mounted in the exit device pushbar on the
hinge end, the switch can be used to activate signal light, horn, monitor,
or other devices. Switch can be wired for normally open or normally
closed. Can be retrofit in field to existing exit devices. Dual switch version
offers redundancy as required by some building codes or it can operate
a second signaling device.

Order REX-Monitor/Signal Kits for upgrading any 3000 or 8000 Series
device: 91-0897-01 for Single Switch or 91-0897-02 for Dual Switch.

Cylinder Dogging

For all non-fire rated Adams Rite E xit Devices

For management control of dogging. Any standard 15/16" to 1-1/8"
long Mortise cylinder with MS
prepared at factory with Cylinder Dogging kit. Not for use with Alarm,
ED, EL, LR or SE options.

®

cam can be used in a pushbar

Not to be used as an access control element. SE Motorized Latch
Retraction option or LR Latch Retraction option is recommended with
access control devices such as card readers or keypads.

Matching End Caps

Standard Adams Rite exit devices come with black metal end caps. Matching
end caps are available for applications where it is preferable that the end
caps match the finish of the exit device. Available for US finishes only.

Specify by adding “MEC” after the regular ordering matrix.

Monitored Dummy Pushbar

8099M1 – Single Switch

8099M2 – Dual Switch

8099-00 – Dummy Only

Dummy pushbar with no latch mechanism but with either a single or
dual monitor/signal switch. May be used with a maglock, where bar turns
off magnet and allows exit from building. Dual switch version allows
redundancy where required by code or the operation of a signal device.
Specify door type and width when ordering. (How to order below)

TRIM
3080 Series Entry Trim

The Grade 1 3080 Series Entry Trim provides outside activation for
doors with any type of Adams Rite deadlatch or exit device. The locked
handle is protected from vandalism and forced entry with a breakaway
clutching mechanism.

Electric Dogging

For all Ada ms Rite E xit Devic es

The ED option uses a holding magnet that keeps the pushbar
depressed (set manually) and the latch retracted for a lower profile
exit device, resulting in less damage and quieter operation. An internal
microswitch signals when the bar is depressed – ideal for automatic
door operators. On fire-rated devices, it must be wired through the fire
alarm system. Devices operate at 24 VDC at 0.6 Amps, with only a
transformer and rectifier.

3090 Keyless Entry

A battery-operated keyless entry control device, the eForce-150 3090
Keyless Entry provides access control for Adams Rite deadlocks,
deadlatches, and exit devices for aluminum stile, steel, and
wood door applications.

The eForce 3090P (Prox) and 3090C (iCL ASS) Keyless Entries provide
maximum security with either HID® Prox or iCLASS contactless card reader.

How to oRdeR 8099duMMyPuSHbar Specify quantity and the following information. Order related products separately.

ProduCtno. Monitor doortyPe PuSHbarfiniSH WidtH uSfiniSH

8099 -M1 -3 0 36 -US32

00 Inactive Dummy Bar 3 Aluminum 0 US Finish 30 30 inches US3 Bright Brass

M0 Active Dummy Bar, no monitor ing switches 4 Wood or hollow metal 1 Clear Anodized 628 36 36 inches US4 Satin Brass

M1 Active Dummy Bar, one monitoring switch 2 Dark Bronze Anodized 313 42 42 inches US32 Bright Stainless

M2 Active Du mmy Bar, two monitoring s witche s 3 Black Anodized 335 48 48 inches US32D Satin Stainless

©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.