LISTED
E09321
ELECTRIC STRIKES
Ultraline
7400, 7401
Electric Strikes
7400, 7401 ELE CTRIC STRIKES
ULT R ALI NE
Specifications
FAIL-SAFE/FAIL-SECURE
• Field selectable at time of installation.
CASE
• Approximately 1" x 3-3/8" x 1-1/16" deep.
STRIKE LIP
• Basic 7400 electric strike has lip of proper length for 1-3/4"
thick door that closes flush with jamb edge. Where door
thickness or jamb shape differs from this configuration, lip
extension kits are available. Not available on 7401.
ES-17
ALUMINUM
UL
BURGLARY
ELECTRIFIED
PRODUCT
GRADE 1
7400, 7401 Electric Strikes with 4-7/8" faceplates are
designed for Adams Rite deadlatches or cylindrical locksets
with 1/2" to 5/8" latchbolt projection. For use in aluminum
jambs and stiles. Opens electrically under 35 lbs. of preload.
Function
Remote electrical control of any door equipped with an Adams Rite 4500,
4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type
lockset with 1/2" to 5/8" latchbolt projection. Electrical actuation unlocks strike jaw,
releasing latchbolt so door can be opened without operating latch itself. Extremely
compact mechanism fits into aluminum jamb (or opposing door) sections as
shallow as 1-1/16". Direct upgrade for Adams Rite 7100 Electric Strikes.
This non-handed strike features an ultra-compact design and an adjustable
stainless steel split-jaw with 1500 lbs. of holding force in fail-secure mode. The
strike releases electrically with up to 35 lbs. of door “preload" (pressure exerted
on doors by air conditioning systems, warping or misaligned hardware which can
disable common electric strikes). Single solenoid operates on 12, 16, or 24 volt AC/
DC power. Strikes are equipped with a quick connect plug-in type connector.
STRIKE OPENING
• 5/8" adjustable x 1-7/16" x 1/2" deep. Bolt retainer jaw is
stainless steel. Strike accepts bolt of Adams Rite 4500, 4700
(discontinued), or 4900 Deadlatch or cylindrical latches.
FACEPLATE
• Measures 1-1/4” x 4-7/8”. 7400 has flat faceplate; 7401
is radiused to match nose on inactive leaf in a pair of
aluminum stile glass doors. Available in a wide range of
architectural finishes.
VO LTAGE
• Field selectable to match power source of 12, 16, or 24
VAC/VDC.
CURRENT DRAW/AMPS
VO LTS AC INTERMITTENT DC CONTINUOUS
12 0.1 63 0.440
16 0.228 0.458*
24 0.084 0.230
*Requires 16 DC adapter (P/N VA 7400-16VDC)
STA NDARD PACK AG E
• Individually boxed with mounting screws, mounting tabs,
adhesive shims to accommodate jamb or stile extrusion
thickness greater or less than nominal 1/8", an adjustable
jaw shim pack and two plug-in voltage adapters for
12/16/24 VAC and 12/24 VDC.
Using jaw inserts of various sizes,
the Ultraline 7400 Series electric
strikes are adjustable to compensate
for door and frame related preload
and security problems.
ARM-014-9/14
OPTIONS
• Monitoring – Two internally mounted switches (Form “C") to
indicate when the latchbolt is engaged in the strike jaws and a
locked/unlocked solenoid status.
• Lip Extension Kits – For various dimensions of door centerline
to jamb edge.
• Modular Packaging – Consult factory or sales representative
for details.
• ELX-ElectroLynx™ Adapter – Connects Adams Rite electrified
products to ElectroLynx system.
• 16 VDC Adapter – VA7400-16VDC required when using
16 VDC power.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ES-18
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
7400, 7401 ELE CTRIC STRIKES
ULT R ALI NE
ELECTRIC STRIKES
Dimensions
1-21/32"
42.1
mm
3-3/8"
85.7mm
4-1/8"
104.8mm
JAMB
1-13/32"
35.7
1-11/16"
42.9
mm
1-1/4"
31.8mm
mm
1-1/16"
27
mm
RADIUS FACE
OF 7401
4-7/8"
123.8mm
3/32"
2.4
Jamb Preparation
1-1/4"
mm
CYLINDER
OF ADAMS
RITE LATCH
1-7/16"
36.5mm
HORIZONTAL
OF ELECTRIC
STRIKE AND
LATCHBOLT
mm
3-3/8"
85.7mm
PRESSED
METAL NUT
(2 REQD.)
MOUNTING
TAB
PRESSURE
SENSITIVE
SPACER
3-3/8"
85.7mm
JAMB
21/32"
16.7mm
31.8
4-7/8"
123.8mm
(4 PLACES)
DRILL & CSK
FOR 8-32 SCREWS
“A”
VERTICAL OF ELECTRIC
(2 PLACES)
STRIKE FACEPLATE
DIRECTLY OPPOSITE
OF DEADLATCH
6-1/8"
155.6
5/32"
4mm
mm
R
Installation
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND
“A”
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
MOUNTING BRACKETS FURNISHED
12-24 COMBINATION
SCREW (2 REQD.)
8-32 X 3/8 FLAT HEAD SCREW
(2 REQD.)
HOW TO ORDER 7400, 7401 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO.
FACEPL ATE
SHAPE
FE ATUR ES FINISH
740 0 M 628
0 Flat - None STANDARD FINISHES 629 Bright Stainless
1 Radius M Monitored 313 Dark Bronze Anodized 630 Satin Stainless
A Modular Pack - Body Kit* 335 Black Anodized RITECOAT FINISH (7401 ONLY)
Bright Brass 119 To match 335 Black Anodized
605
606 Satin Brass 121 To match 313 Dark Bronze Anodized
612 Satin Bronze 130 To match 628 Clear Anodized
628 Clear Anodized
Fail-secure can be field converted to fail-safe or vice-versa
*Modular Packing Program - match body kit with faceplate kit to complete. Use 7400A for standard jambs and 7401A for radius stile mounting.
No finish designation required.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions.
ELX-ElectroLynx™ Adapter.
4603 Rectifier, 4605/4606 Transformer,
Piezo Horn audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700 Deadlatch is
discontinued and replaced by 4900 Deadlatch.
VA7400-16VDC Adapter.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Loading...