Adams Rite 7240-310-630-00, 7240-310-630-50, 7240-319-630-00, 7240-319-630-50, 7240-340-630-00 Specsheet

LISTED

 HOUR

E09321

ELECTRIC STRIKES

7240 FIRE-R ATED ELECTRIC STRIKE

Specifications

ES-13

7240 Fire-Rated
Electric Strike

HOLLOW

METAL

7240 Fire-Rated Electric Strikes with 4-7/8" faceplates are
designed for cylindrical locksets with up to 5/8" latchbolt
projection. For use in hollow metal door jambs.

Function

Remote electrical control of any door equipped with cylindrical (key-in-knob/
lever) type locksets with up to 5/8" latchbolt projection. Electrical actuation
unlocks strike jaw, releasing latchbolt so door can be opened without
operating latch itself. Extremely compact mechanism fits into jamb sections
as shallow as 1-21/32". Fire-rated in fail-secure mode.

UL 

BURGLARY

ELECTRIFIED

PRODUCT

FIRE RATED

GRADE 1

UL10C, CAN/ULC-S104, FIRE RATED 3 HR.

CASE

• Approximately 1" x 3-3/8" x 1-5/8" deep.

STRIKE LIP

• Basic 7240 strike has lip of proper length for 1-3/4" thick

door that closes flush with jamb edge.

STRIKE OPENING

• 5/8" x 1-7/16" x 9/16" deep. Bolt retainer jaw and

strike lip are stainless steel. Strike accepts bolt from a
variety of latchsets.

FACEPLAT E

• Measures 1-1/4 x 4-7/8”. Faceplate is flat, with

square corners.

VO LTAGE

• Available in 12 or 24 volt AC and DC. DC continuous units

are silent, AC intermittent units “buzz" on operation.

CURRENT DRAW/AMPS

VO LTS AC INTERMITTENT DC CONTINUOUS

12 1.42 0.33

24 0.74 0 .17

STA NDAR D PACK AG E

• Individually boxed with mounting screws. Includes

mounting clips and adhesive shims for use where welded
tabs are omitted.

FITS STANDARD

MOUNTING

TAB ANSI PREP

3/32"

2.4

OPTIONS

• Available with two monitoring signal switches which sense

whether latchbolt is in strike and whether strike jaw is
blocked. Choice of voltage in AC and DC for intermittent or

mm

continuous duty. Assembled for fail-secure (locked when
unpowered) operation.

ARM-014-9/14

800.872.3267 • Fax [phone]

10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044

www.adamsrite.com

ES-14

All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.

7240 FIRE-R ATED ELECTRIC STRIKE

ELECTRIC STRIKES

Dimensions Installation in Steel Jamb

VERTICAL OF ELECTRIC STRIKE

FACEPLATE DIRECTLY OPPOSITE

OF DEADLATCH

HORIZONTAL OF

ELECTRIC STRIKE SAME

AS HORIZONTAL

OF LATCHBOLT

3-3/8"

85.7mm

1-5/8"

41.3

mm

1-1/16"

27mm

21/32"

16.7mm

1-15/32"

37.3mm

1-1/8"

28.6

25.4mm

1/4"

6.4mm

mm

1"

MOUNTING

BRACKET

WELDED TO

JAMB

4-1/8"

104.8

mm

4-7/8"

123.8

3-5/8"

92mm

mm

4-7/8"

123.8mm

1-1/4"

31.8mm

4-1/8"

104.8

mm

3-3/8"

85.7

mm

JAMB
EDGE

“A”

STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"

(SEE HOW TO ORDER)

MOUNTING BRACKETS FURNISHED

3/32"

2.4

mm

21/32"

16.7mm

“A”

3-3/8"

85.7mm

12-24

(2 PLCS.)

1-1/4"

31.8

mm

TURN STRIKE

UPSIDE DOWN

FOR OPPOSITE HAND

HOW TO ORDER 7240 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.

PRODUCT NO. VO LTAGE CURRENT AND DUTY FE ATUR ES FINISH

Door Ce nterline to J am Edge for In terior Fram es

LIP EX TENSIONS (DIM. A)

7240 -3 1 0 -630 -50

3 12 Volt 1 DC Continuous or Intermittent 0 Fail-Secure* 630 Satin Stainless 00 1-1/16" or less

5 24 Volt 4 AC Intermittent 9 Monitor/Fail-Secure 50 1-3/8"

*Not available Fail-Safe

RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:

Power

4603 Rectifier, 4605/4606 Transformer, Piezo Horn audible indicator, PS-1.

©2014, Hanchett Entry Systems, Inc., an ASSA AB LOY Group company.