Adams Rite 7170-310-313-00, 7170-310-335-00, 7170-310-335-07, 7170-310-335-50, 7170-310-626-00 Specsheet
...
LISTED
E09321
3/32"
ELECTRIC STRIKES
7170 Electric Strike
HOLLOW
METAL
WOOD
7170 Electric Strikes with 4-7/8" faceplates are designed for
mortise or cylindrical type locksets with up to 3/4" latchbolt
projection without deadbolt. For use in hollow metal or
wood door jambs.
Function
Remote electrical control of any door equipped with a mortise or cylindrical
type lockset with up to 3/4" latchbolt projection without deadbolt. Electrical
actuation unlocks strike jaw, releasing latchbolt so door can be opened without
operating latch itself. Extremely compact mechanism fits into hollow metal
jamb sections as shallow as 1-7/8". Fits existing prep for discontinued Adams
Rite 7560AN, 7570, 7860AN, 7870 Electric Strikes.
The electric strike must be positioned to accommodate offset mortise latches
during installation. Please refer to installation instructions.
FITS STANDARD
MOUNTING
TAB ANSI PREP
UL
BURGLARY
2.4
ELECTRIFIED
PRODUCT
mm
GRADE 1
7170 ELECTR IC STRIKE
Specifications
FAIL-SAFE/FAIL-SECURE
• Field convertible from one mode to the other.
However, AC intermittent solenoid must not be used
continuously in either.
CASE
• Approximately 1" x 3-3/8" x 1-7/8" deep.
STRIKE LIP
• Basic 7170 strike has lip of proper length for 1-3/4"
thick door that closes flush with jamb edge. Where
door thickness or jamb shape differs from this standard
relationship, lip extension kits are available, specified by
last dash number.
STRIKE OPENING
• 5/8" x 1-7/16" x 5/8" deep. Bolt retainer jaw is
stainless steel.
FACEPLATE
• Measures 1-1/4 x 4-7/8”. Faceplate is flat, with square
corners. Available in a wide range of architectural finishes.
VO LTAG E
• Available in 12 or 24 volt AC and DC. DC continuous units
are silent, AC intermittent units “buzz" on operation
CURRENT DRAW/AMPS
VO LTS AC INTERMITTENT DC CONTINUOUS
12 1.42 0.33
24 0.74 0 .17
STA N DARD PAC K AG E
• Individually boxed with mounting screws. Includes
mounting clips and adhesive shims for use where welded
tabs are omitted.
OPTIONS
• Available with two monitoring signal switches which sense
whether latchbolt is in strike and whether strike jaw is blocked.
Choice of voltage in AC and DC for intermittent or continuous
duty. Specify assembled for either fail-secure (locked when
unpowered) or fail-safe (locked when powered) operation, but
can be field converted to the other mode.
ES-11
All 3/4" throw latches
require 1/8" minimum
door gap. Horizontal center
line of strike must match line
of mortise latchbolt.
ARM-014-9/14
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ES-12
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
7170 ELECTR IC STRIKE
ELECTRIC STRIKES
Dimensions
1-1/2"
1-1/2"
38.1mm
38.1mm
1-13/16"
1-13/16"
46mm
46mm
4-7/8"
4-7/8"
123.8
123.8
4-1/8"
4-1/8"
104.8
104.8
mm
mm
27/32"
27/32"
1"
1"
mm
mm
21.4
21.4
25.4mm
25.4mm
mm
mm
3-3/8"
3-3/8"
85.7mm
85.7mm
JAMB
JAMB
EDGE
EDGE
“A”
“A”
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
(SEE HOW TO ORDER)
(SEE HOW TO ORDER)
MOUNTING BRACKETS FURNISHED
MOUNTING BRACKETS FURNISHED
1-1/4"
1-1/4"
31.8mm
31.8mm
1-9/16"
1-9/16"
39.7mm
39.7mm
1-1/8"
1-1/8"
28.6mm
28.6mm
20°
20°
1"
1"
25.4mm
25.4mm
1/4"
1/4"
6.4mm
6.4mm
3/32"
3/32"
2.4mm
2.4mm
3-3/8"
3-3/8"
85.7mm
85.7mm
Jamb Prep in Wood
VERTICAL OF DEADLATCH MOUNTING
VERTICAL OF DEADLATCH MOUNTING
SCREWS IN SAME PLANE AS ELECTRIC
SCREWS IN SAME PLANE AS ELECTRIC
STRIKE MOUNTING SCREWS
STRIKE MOUNTING SCREWS
1-3/8"
1-3/8"
34.9mm
34.9mm
HORIZONTAL OF
HORIZONTAL OF
STRIKE SAME AS
STRIKE SAME AS
HORIZONTAL
HORIZONTAL
OF LATCHBOLT
OF LATCHBOLT
27/32"
27/32"
mm
mm
21.4
21.4
1-1/2"
1-1/2"
38.1
38.1
1-53/64"
1-53/64"
46.4mm
46.4mm
MOUNTING BRACKET
MOUNTING BRACKET
(MOUNTING CLIP)
(MOUNTING CLIP)
WELDED TO JAMB
WELDED TO JAMB
(OR PROVIDED)
(OR PROVIDED)
27/32"
27/32"
21.4mm
21.4mm
HORIZONTAL
HORIZONTAL
OF
OF
ELECTRIC
ELECTRIC
STRIKE
STRIKE
3-3/8"
3-3/8"
85.7mm
85.7mm
1-1/4"
1-1/4"
31.5mm
12-24
12-24
(2 PLCS)
(2 PLCS)
31.5mm
"A"
"A"
VERTICAL CENTERLINE OF ELECTRIC
VERTICAL CENTERLINE OF ELECTRIC
STRIKE FACEPLATE DIRECTLY OPPOSITE
STRIKE FACEPLATE DIRECTLY OPPOSITE
1-1/8"
1-1/8"
mm
mm
28.6
28.6
3/32"
3/32"
2.4mm
mm
mm
CENTERLINE OF DEADLATCH
CENTERLINE OF DEADLATCH
2.4mm
3-5/8"
3-5/8"
92.1
92.1
“A”
“A”
4-1/8"
4-1/8"
104.8mm
104.8mm
mm
mm
15.9
15.9
123.8
123.8
5/8"
5/8"
4-7/8"
4-7/8"
104.8mm
1/8"
1/8"
3.2
3.2
1-1/4"
1-1/4"
31.8mm
31.8mm
mm
mm
Jamb
mm
mm
mm
mm
3-3/8"
3-3/8"
85.7mm
85.7mm
104.8mm
Prep &
Installation
in Steel
PRESSURE
PRESSURE
SENSITIVE
SENSITIVE
SPACER
SPACER
4-1/8"
4-1/8"
4-7/8"
4-7/8"
123.8mm
123.8mm
HOW TO ORDER 7170 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. V OLTAG E CURRENT AND DUTY FEATURES* FINISH
LIP EX TENS IONS (D IM. A)
Door Ce nterline to Jamb Edg e
7170 -3 1 0 -628 -00
3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or lessv 05 2"
4 16 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 50 1-3/8" 07 2-1/4"
5 24 Volt 7 Monitor/Fail-Safe 626 Satin Chrome 01 1-1/2" 09 2-1/ 2"
9 Monitor/Fail-Secure 628 Clear Anodized 02 1-5/8" 12 2-7/8"
03 1-3/4"
*Fail-secure can be field converted to fail-safe or vice-versa
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions. 4603 Rectifier, 4605/4606 Transformer, Piezo Horn
audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700 Deadlatch is
discontinued and replaced by 4900 Deadlatch.
©2014, Hanchett Entr y Systems, Inc., an ASSA ABLOY Group company.
Loading...