Page 1
LISTED
E09321
ELECTRIC STRIKES
7100, 7101 ELECTRIC STRIKES
Specifications
ES-1
7100, 7101
Electric Strikes
ALUMINUM
UL
BURGLARY
7100, 7101 Electric Strikes with 4-7/8" faceplates are
designed for Adams Rite deadlatches or cylindrical
locksets with 1/2" to 5/8" latchbolt projection. For use
in aluminum jambs and stiles.
Function
Remote electrical control of any door equipped with an Adams Rite 4500,
4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever)
type lockset with 1/2" to 5/8" latchbolt projection. Electrical actuation unlocks
strike jaw, releasing latchbolt so door can be opened without operating latch
itself. Extremely compact mechanism fits into aluminum jamb (or opposing
door) sections as shallow as 1-5/8". Fits existing prep for discontinued Adams
Rite 7000, 7500, 7800 Electric Strikes.
ELECTRIFIED
PRODUCT
GRADE 1
FAIL-SAFE/FAIL-SECURE
• Field convertible from one mode to the other.
However, AC intermittent solenoid must not be used
continuously in either.
CASE
• Approximately 1" x 3-3/8" x 1-5/8" deep.
STRIKE LIP
• Basic 7100 strike has lip of proper length for 1-3/4" thick
door that closes flush with jamb edge. Where door thickness
or jamb shape differs from this standard relationship, lip
extension kits are available, specified by last dash number.
Not available on 7101.
STRIKE OPENING
• 5/8" x 1-7/16" x 1/2" deep. Bolt retainer jaw is stainless
steel. Strike accepts bolt of any Adams Rite 4500, 4700
(discontinued), or 4900 Deadlatch or cylindrical latches.
FACEPLATE
• Measures 1-1/4” x 4-7/8”. 7100 has flat faceplate; 7101
is radiused to match nose on inactive leaf in a pair of
narrow stile glass doors. Available in a wide range of
architectural finishes.
VO LTAG E
• Available in 12 or 24 volt AC and DC. DC continuous units
are silent, AC intermittent units “buzz" on operation.
CURRENT DRAW/AMPS
VO LTS AC INTERMITTENT DC CONTINUOUS
12 1.42 0.33
24 0.74 0 .17
STA N DARD PACK AGE
• Individually boxed with mounting screws, mounting clips,
adhesive shims to accommodate jamb or stile extrusion
thickness greater or less than nominal 1/8".
OPTIONS
• Available with two monitoring signal switches which sense
whether latchbolt is in strike and whether strike jaw is
blocked. Choice of mounting in AC and DC for intermittent
or continuous duty. 7100 Electric Strike (flat faceplate)
available with extended strike lip. Specify assembled
for either fail-secure (locked when unpowered) or failsafe (locked when powered) operation, but can be field
converted to the other mode.
ARM-014-9/14
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
Page 2
ES-2
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
7100, 7101 ELECTRIC STRIKES
Dimensions Jamb Preparation
mm
1/4"
6.4
mm
2-5/8"
66.7mm
RADIUS FACE
OF 7101
3/32"
2.4
HORIZONTAL OF
ELECTRIC STRIKE
AND LATCHBOLT
mm
1-5/8"
41.3mm
1-1/16"
27mm
21/32"
16.7mm
1-15/32"
37.3
mm
1-1/8"
28.6
25.4
31.8mm
mm
1"
1-1/4"
Installation
4-1/8"
4-7/8"
123.8
104.8mm
mm
3-3/8"
85.7mm
3-3/8"
85.7mm
PRESSED
METAL NUT
ELECTRIC STRIKES
CYLINDER OF
ADAMS RITE
LATCH
1-7/16"
36.5
mm
3-3/8"
85.7
mm
21/32"
16.7mm
MOUNTING
CLIP
PRESSURE
SENSITIVE
SPACER
JAMB
1-1/4"
31.8mm
6-1/8"
155.8
4-7/8"
mm
123.8
5/32"
4
(4 PLACES)
DRILL & CSK
FOR 8-32 SCREW
(2 PLACES)
“A”
VERTICAL OF ELECTRIC
STRIKE FACEPLATE DIRECTLY
OPPOSITE OF DEADLATCH
mm
R
mm
JAMB
EDGE
“A”
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
(SEE HOW TO ORDER)
MOUNTING BRACKETS FURNISHED
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND
HOW TO ORDER 7100, 7101 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO.
FACEPLAT E
SHAPE
VO LTAG E CURRENT AND DUTY FEATURES* FINISH**
LIP EX TENSIONS (DIM. A)
(Door Center line to Ja mb Edg e)
710 0 -3 1 0 -628 -00
0 Flat 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"
1 Radius 4 16 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"
5 24 Volt 7 Monitored/ Fail-Safe 626 Satin Chrome 02 1-5/8" 09 2-1/2"
9 Monitored/ Fail-Secure 628 Clear Anodized 03 1-3/4" 12 2-7/8"
*Fail-secure can be field converted to fail-safe or vice-versa. **7101 available in 628, 313, 335 only.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions. 4603 Rectifier, 4605/4606 Transformer, Piezo Horn
audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700 Deadlatch is
discontinued and replaced by 4900 Deadlatch.
©2014, Hanchett Entr y Systems, Inc., an ASSA ABLOY Group company.
Loading...