Adams Rite 7100-310-313-00, 7100-310-313-01, 7100-310-313-05, 7100-310-335-00, 7100-310-335-03 Specsheet

LISTED

E09321

ELECTRIC STRIKES

7100, 7101 ELECTRIC STRIKES

Specifications

ES-1

7100, 7101
Electric Strikes

ALUMINUM

UL 

BURGLARY

7100, 7101 Electric Strikes with 4-7/8" faceplates are
designed for Adams Rite deadlatches or cylindrical
locksets with 1/2" to 5/8" latchbolt projection. For use
in aluminum jambs and stiles.

Function

Remote electrical control of any door equipped with an Adams Rite 4500,
4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever)
type lockset with 1/2" to 5/8" latchbolt projection. Electrical actuation unlocks
strike jaw, releasing latchbolt so door can be opened without operating latch
itself. Extremely compact mechanism fits into aluminum jamb (or opposing
door) sections as shallow as 1-5/8". Fits existing prep for discontinued Adams
Rite 7000, 7500, 7800 Electric Strikes.

ELECTRIFIED

PRODUCT

GRADE 1

FAIL-SAFE/FAIL-SECURE

• Field convertible from one mode to the other.

However, AC intermittent solenoid must not be used
continuously in either.

CASE

• Approximately 1" x 3-3/8" x 1-5/8" deep.

STRIKE LIP

• Basic 7100 strike has lip of proper length for 1-3/4" thick

door that closes flush with jamb edge. Where door thickness
or jamb shape differs from this standard relationship, lip
extension kits are available, specified by last dash number.
Not available on 7101.

STRIKE OPENING

• 5/8" x 1-7/16" x 1/2" deep. Bolt retainer jaw is stainless

steel. Strike accepts bolt of any Adams Rite 4500, 4700
(discontinued), or 4900 Deadlatch or cylindrical latches.

FACEPLATE

• Measures 1-1/4” x 4-7/8”. 7100 has flat faceplate; 7101

is radiused to match nose on inactive leaf in a pair of
narrow stile glass doors. Available in a wide range of
architectural finishes.

VO LTAG E

• Available in 12 or 24 volt AC and DC. DC continuous units

are silent, AC intermittent units “buzz" on operation.

CURRENT DRAW/AMPS

VO LTS AC INTERMITTENT DC CONTINUOUS

12 1.42 0.33

24 0.74 0 .17

STA N DARD PACK AGE

• Individually boxed with mounting screws, mounting clips,

adhesive shims to accommodate jamb or stile extrusion
thickness greater or less than nominal 1/8".

OPTIONS

• Available with two monitoring signal switches which sense

whether latchbolt is in strike and whether strike jaw is
blocked. Choice of mounting in AC and DC for intermittent
or continuous duty. 7100 Electric Strike (flat faceplate)
available with extended strike lip. Specify assembled
for either fail-secure (locked when unpowered) or fail­safe (locked when powered) operation, but can be field
converted to the other mode.

ARM-014-9/14

800.872.3267 • Fax [phone]

10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044

www.adamsrite.com

ES-2

All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.

7100, 7101 ELECTRIC STRIKES

Dimensions Jamb Preparation

mm

1/4"

6.4

mm

2-5/8"

66.7mm

RADIUS FACE
OF 7101

3/32"

2.4

HORIZONTAL OF
ELECTRIC STRIKE
AND LATCHBOLT

mm

1-5/8"

41.3mm

1-1/16"

27mm

21/32"

16.7mm

1-15/32"

37.3

mm

1-1/8"

28.6

25.4

31.8mm

mm

1"

1-1/4"

Installation

4-1/8"

4-7/8"

123.8

104.8mm

mm

3-3/8"

85.7mm

3-3/8"

85.7mm

PRESSED

METAL NUT

ELECTRIC STRIKES

CYLINDER OF

ADAMS RITE

LATCH

1-7/16"

36.5

mm

3-3/8"

85.7

mm

21/32"

16.7mm

MOUNTING

CLIP

PRESSURE

SENSITIVE

SPACER

JAMB

1-1/4"

31.8mm

6-1/8"

155.8

4-7/8"

mm

123.8

5/32"

4

(4 PLACES)

DRILL & CSK
FOR 8-32 SCREW
(2 PLACES)

“A”

VERTICAL OF ELECTRIC
STRIKE FACEPLATE DIRECTLY
OPPOSITE OF DEADLATCH

mm

R

mm

JAMB

EDGE

“A”

STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"

(SEE HOW TO ORDER)

MOUNTING BRACKETS FURNISHED

TURN STRIKE

UPSIDE DOWN

FOR OPPOSITE HAND

HOW TO ORDER 7100, 7101 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.

PRODUCT NO.

FACEPLAT E

SHAPE

VO LTAG E CURRENT AND DUTY FEATURES* FINISH**

LIP EX TENSIONS (DIM. A)

(Door Center line to Ja mb Edg e)

710 0 -3 1 0 -628 -00

0 Flat 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"

1 Radius 4 16 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"

5 24 Volt 7 Monitored/ Fail-Safe 626 Satin Chrome 02 1-5/8" 09 2-1/2"

9 Monitored/ Fail-Secure 628 Clear Anodized 03 1-3/4" 12 2-7/8"

*Fail-secure can be field converted to fail-safe or vice-versa. **7101 available in 628, 313, 335 only.

RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:

Options Power Deadlatches

Lip extensions. 4603 Rectifier, 4605/4606 Transformer, Piezo Horn

audible indicator, PS-1.

4500 and 4900 Series Deadlatches. Note that 4700 Deadlatch is
discontinued and replaced by 4900 Deadlatch.

©2014, Hanchett Entr y Systems, Inc., an ASSA ABLOY Group company.