Page 1
EB292
DEADLOC KS
5017 Wood Door
Deadlock/Deadlatch
WOOD
The 5017 Wood Door Deadlock/Latch provides the strength
and deeper backset required to secure sliding wood doors.
GRADE 2
5017 WOOD DOOR DEADLOCK/DEADLATCH
Operation
45° rotation of turn or key throws or retracts bolt. Bolt is selfprotecting: if door is shut while bolt is extended, it will retract,
preventing damage or accidental lock-out.
Specifications
BACKSET
• 1-3/16" (1-1/4" including faceplate).
CASE
• Stainless steel, measures 1/2" x 4" x 1-19/32" deep. Bolt is
laminated stainless steel (specify 5015 for zinc plated steel
case and faceplate).
FACEPLAT E
• Stainless steel, 5/8" x 4-1/2" with radiused ends.
1015 TURN
• Available with 1016 blank plate shown for doors from 5/6"
to 2-1/4" thickness. Without blank plate turn available (for
use with cylinder pull) on doors from 1-7/16" to 2" thickness.
Standard finish 130, Satin Aluminum enamel.
DL-39
Function
For wood framed sliding doors, the 5017 Wood Door Deadlock/Latch provides
the same thousand pound strength that the MS1847 Deadlock/Latch provides for
metal stiles. A deeper backset clears the recessed jamb used with wood doors.
The bolt throw is easily adjusted by means of a screw in the faceplate. Mounting
is by through-bolts, which also secure the inside turn and outside cylinder when
installed.
4810 BOX
STRIKE
1016 PLAT E
4026 CYLINDER PULL
• Five pin tumbler cylinder in zinc alloy housing. Standard finish
130 Satin Aluminum.
OPTIONS
• Specify 5015 for zinc plated steel case and faceplate. 1015
Turn for inside operation is available alone (for use with 4026
cylinder pull on outside) or with a blank 1016 outside trimplate
and binder posts (when cylinder is not required). 4810 Box
Strike with wood screws available separately.
STA NDAR D PACK AG E
• Cylinder pulls and/or thumbturns available separately.
Shipping weight: 1/2 lb.
1015
ARM-014-9/14
4026
CYLINDER
PULL
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
Page 2
DL-40
5017 WOOD DOOR DEADLOCK/DEADLATCH
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
Dimensions
1/2"
12.7mm
1-19/32
40.5
mm
1-1/4"
31.8mm
4"
101.6mm
(5017)
5017
19/64"
7.5
mm
5/8"
15.9mm
7/32"
5.6
mm
FULL RADIUS
BOTH ENDS
4-1/2"
114.3mm
4"
101.6mm
1-1/32
26.2mm
3-3/8"
85.7mm
1/16"
1.6mm
11/16"
17.45mm
4810
51/64
20.2mm
1/8"
3.18mm
2-9/16"
65.1mm
Stile Preparation
FOR LOCK, TURN & CYLINDER PULL
Jamb Preparation
DEADLOC KS
1/8"
R
3.2mm
(4 PLCS)
4-1/16"
103.2mm
17/32"
13.5mm
FOR STRIKE
2-27/32"
72.2mm
10-32
(2 PLCS)
2-3/8"
60.3mm
3-1/8"
79.4mm
3-7/8"
98.4mm
1-9/16"
39.7mm
2-9/16"
65.1mm
MIN
1-3/16"
30.2
7/32"
DIA.
5.6mm
(2 PLCS)
2-9/16"
65.1mm
9/16"
14.3mm
3/8"
DIA.
9.5mm
3/4"
19
mm
mm
1/8"
3.2mm
1-7/32"
31mm
27/32"
21.4mm
4026 1016 1015
19/32"
15.1mm
MOUNTING SCREWS
AND POSTS FURNISHED
3/4"
19.1mm
5/8"
15.9mm
HOW TO ORDER 5017 WOOD DOOR DEADLOCK/DEADLATCH
Specify quantity and the following information. Order related products separately.
PRODUCT NO. LATCH CONFIGURATION
5017 -00
00 Standard
02 Self Latching
For installation with cylinder, specify quantity of 4026 cylinder pulls and door thickness.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories
Turn and cylinder pull. 4810 Box Strike.
7/8"
22.2mm
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Loading...