Adams Rite 4591-01-00-313, 4591-01-00-335, 4591-01-00-628, 4591-01-00-US26D, 4591-01-01-313 Specsheet

Trim

4591 DEADLATCH PADDLE

Specifications

T-19

4591 Deadlatch
Paddle

The 4591 Deadlatch Paddle is an ergonomically-friendly
alternative to a knob or lever handle. Operate with a simple
push or pull.

Function

An alternative to knob or lever handles. Makes opening a latched door as natural
as opening an unlatched one – just push or pull in the direction the door swings.
Available for any Adams Rite 4300, 4500 or 4900 Series Deadlatch, MS+1890
Deadlock/Latch, or 2190/2290 Interconnected Deadbolt/Deadlatch.

Operation

Available in four configurations: push to left, push to right, pull to left, and pull to
right. Can be reconfigured to any mode in the field. Dogging not to be installed in
pull configuration.

paddLe

• Extruded aluminum, 628 Clear Anodized finish (US28). 313

Dark Bronze Anodized and 335 Black Anodized are also
available. US3 Bright Brass, US26 Bright Chrome, or US26D
Satin Chrome plating is also available.

escuTcheon

• Zinc alloy with Black finish. Houses steel operating

mechanism. Secured to door stile with special binder posts
that extend into the escutcheon to rigidly resist torque loads
in any direction.

cam pLug

• Furnished for use with 4300, 4500 and 4900 Series

Deadlatches. Cam plug not for use with MS+1890 Deadlock /
Latch or 2190/2290 Interconnected Deadbolt/Deadlatch.
Secured in latch body by cylinder setscrew, plug is also
rigidly tied to escutcheon by hardened steel pins.

moniTor sWiTch opTions

4591m

• Paddle without latch drive mechanism but with switch that

can be wired to make or break a low voltage circuit.

4591ma

• Paddle with latch drive mechanism, complete active

paddle with switch.

91-0914 moniTor sWiTch kiT

• Adds monitor switch function to 4591 Paddle ("push"

version only).

cam pLug

heX keY
For dogging

paddLe dogging (“push” versions onLY)

• Turning hex key in escutcheon holds the paddle down,

leaving door free-swinging. Dogging key provided.

opTions

• First dash number specifies operation (handing) and

compatible latch. Second dash number can be used to
specify non-standard units for doors thicker than 1-3/4"
(see dash table on back of page). Also available: 4591M
Paddle/switch to actuate magnetic lock, alarm, etc. (No latch
retracting mechanism). 4591MA Active Paddle with switch
and latch retracting mechanism. 4781 Two-Point Deadlatch
uses a modified, but matching version of the 4591 Paddle.

sTa ndard pac kage

• Individually boxed with dogging hex key and mounting

hardware. Units for 4300, 4500 or 4900 Series Deadlatches
include cam plug. Shipping weight: 1-1/2 lbs.

ARM-014-9/14

800.872.3267 • Fax [phone]

10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044

www.adamsrite.com

T-20

All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.

4591 DEADLATCH PADDLE

TRIM

DimensionsDimensions

5"

127mm

4-5/32"

105.6mm

Installation

1

INSTALL
BINDER
POSTS

5/16-24

NUT

FIRST DASH

FOR LATCH SERIES OPPERATION USE

-01 4300/4500/4900

-11 MS+1890/2190

-02 4300/4500/4900

-12 MS+1890/2190

-03 4300/4500/4900

-13 MS+1890/2190

-04 4300/4500/4900

-14 MS+1890/2190

PULL

TO LEFT

PUSH

TO LEFT

PULL

TO RIGH T

PUSH

TO RIGH T

1-11/32"

34.1mm

Outside of left hand reverse door or
inside of right hand

Outside of left hand door or inside of right
hand reverse

Outside of right hand reverse door or
inside or left hand

Outside of right hand door or inside of left
hand reverse

1-51/64"

45.6mm

2

INSTALL
LATCH &
CAM PLUG

CAM PLUG

(NOT REQ. WITH

MS+1890/2190)

PUSH*

*SHOWN AT REST.

PADDLE TRAVEL IS:

PULL*

2"

50.8mm

7/8"

22.2mm

2-1/16"

77.8mm

Stile Preparation

For 4500/4900 latches, see MS+1890/2190
for different hole pattern

STILE

LATCH

CYL.

3

INSTALL
ESCUTCHEON

10-32

SCREWS

LH

LHR

-03 OR -13

-02 OR -12

-04 OR -14

-01 OR -11

RH

RHR

BACKSET

1-23/32"

43.7mm

1-1/4"

31.8mm

4

INSTALL
PADDLE

-01 OR -11

-04 OR -14

-02 OR -12

-03 OR -13

21/64"

8.3mm

(2 PLCS)

3"

76.2

mm

DIA.

PIVOT PIN
SETSCREW

DIA.

How to order 4591 deadlatcH paddle

Specify quantity and the following information. Order related products separately.

PRODUCT NO. OPTIONS** OPERATION DOOR THICKNESS FINISH*

4591 M 02 -00 -313

- Standard Paddle See table above For 4300, 4500, 4900 Series Deadlatches For MS+1890, 2190 313 Dark Bronze Anodized

M Paddle w/ switch only 00 1-3/4" 00 1-3/4" 335 Black Anodized

MA Active paddle w/ switch 01 1-13/16" to 2" 01 1-3/4" to 2-1/4" 628 Clear Anodized

02 2-1/4" to 2-1/2" 02 2-5/16" to 2-1/2" US3 Bright Brass

03 2-3/4" to 3" 03 2-9/16" to 2-3/4" US26 Bright Chrome

04 3-1/4" US26D Satin Chrome

* Paddle only. ** M and MA options availble on push paddles only, not pull paddles.

related productS compatible productS

When purchasing this product, please consider the following
related products, available separately:

Accessories Deadlocks Deadlatches

91-0914 Monitor Switch Kit. MS+1890 Deadlock/Latch

This product is compatible with the following products:

2190/2290 Interconnected Deadbolt/Deadlatch

4300 eLatch Electrified Deadlatch
4500 Series Standard Duty Deadlatch
4900 Series Heavy Duty Deadlatch

©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.