DIMENSIONS
Inches
(Millimeters)
C
"A"
STILE PREPARATION
"A"
BACK OF STILE
C
L
L
"B"
.980
24.9
"A"
6.38
162
5.80
147.3
6.81
173
.42
10.6
Turning Key / Handle / Paddle
DOES NOT pull Main Latch Assy.
.63
15.9
1.587
40.3
1.437
36.5
C
1.00
25.4
.62
15.7
C
"A"
L
C
"A"
C
L
C
HOW BACKSET
IS MEASURED
2.769
70.3
OPERATION INSTRUCTION
Press Aux Latch to secure
Main Latch. Turn key, apply
voltage, or operate Paddle/Handle
to unlock Main Latch.
As door opens, Main Latch
pivots and collapses.
.182
.182
[20.32]
[20.32]
CYLINDER
C
L
RADIUS
L
1.594
[40.48]
Flat Face Plate can be
FLAT
L
adjusted for right or left
beveled edge doors.
Radius Weather Strip is
optional.
BEVEL
L
FOR OPTIMUM LOCK PERFORMANCE, THE
GAP BETWEEN THE DOOR AND FRAME MUST
MEET INDUSTRY STANDARDS OF AN 1/8"
DOOR
C
L
C
R.120
R.120
[3.0]
[3.0]
.611
.611
[15.52]
[15.52]
TO JAMB EDGE
AVAILABLE FACEPLATES
FLAT
RADIUS
RADIUS WEATHER STRIP
5.375
136.5
4.635
117.7
L
.06
[1.5]
6.885
[174.9]
1.010
25.7
+
-
+
+.005
-.000
+.38
-.00
.015
.000
0.4
0
R.156
[3.96]
TYP.
6.38
162.1
2x
#10-32
UNC-2B
INSTALLATION
(Must use a Face Plate for installation)
CYLINDER
C
L
C
L
1.437
[36.5]
C
L
C
L
2.769
[70.3]
Adjustable Mounting Tube Bracket
may be removed for mounting on
bridges, tabs, or either methods.
4581
FRONT VIEW
Adams Rite Manufacturing Co.
260 Santa Fe Street,
Pomona, CA 91767
Phone: 909-632-2300
Fax: 909-632-2369
www.adamsrite.com
CAM TOLERANCE:
±.005
( ±.13 )
4300 SERIES ELECTRIFIED DEADLATCH
80-0180-421
Rev.
D
ECN:11899
.570
14.5
Drill and c'sk for
#10-32 X 1/2"
Flat Head
Machine Screws
PRODUCT MUST BE INSTALLED
ACCORDING TO ALL APPLICABLE
BUILDING AND LIFE SAFETY CODES
4581
Cam Plug Assy.
(included with 4300)
INSTALLATION INSTRUCTIONS
Page of12
Appvd: MP
Date: 03/16/12
Depth
Dim.
#8-32 x 5/16"
Truss Head Screw
Depth Dim.
Yoke
Remove
Bevel
Tabs
Fig. 6
Inside Stile
wall
Fig. 1
Tube
Spacer
Fig. 2
RADIUS WEATHERSEAL
FACEPLATES ONLY
Screwdriver
3/16"
Hex Key
Mounting
Plate
Fig. 3
SOLENOID SPECIFICATION
SOLENOID AVAILABLE VOLTAGES
12V DC CONTINUOUS DUTY,
24V DC CONTINUOUS DUTY.
SOLENOID WIRING DIAGRAM
BROWN
YELLOW
BLUE
4300
ORANGE
12V DC
ELECTRIFIED DEADLATCH
Fig. 7
4300 SERIES
WIRES
BUNDLE
BROWN
YELLOW
BLUE
4300
ORANGE
24V DC
Fig. 4
VOLTAGE
ADAPTOR CABLE
FLAT FACE PLATE
NEUTRAL POSITION
INTERMITTENT / CONTINUOUS DUTY 12 / 24V DC
120V AC
LINE
VOLTAGE
4605 / 4606 -24V AC
40 VA TRANSFORMER
4300 WIRING DIAGRAM
4603
2-AMP
RED -
RED -
- LOOP THE WIRES BUNDLE FROM 4300
ELECTRIFIED 'S SOLENOID UNDER AND
AROUND ITS HOUSING AS SHOWN (Fig.7).
- EXTEND THE WIRES RUN FROM THE
POWER SOURCE AND THROUGH THE
STILE PREPARATION.
- CONNECT THE WIRE TO THE VOLTAGE
ADAPTOR CABLE.
- ATTACH VOLTAGE ADAPTOR CABLE
TO 4300 WIRES BUNDLE AS SHOWN.
RECTIFIER
WHITE (+)
4300
ELECTRIFIED DEADLATCH
BLACK (-)
Bevel
Tab
RHR BEVEL POSITION
Fig. 5
LHR BEVEL POSITION
MONITORING (OPTIONAL)
MONITORED DEADLATCH CONTAINS AN INTERNALLY
MOUNTED SWITCH. THIS SWITCH IS ACTIVATED WHEN
THE DOOR IS IN CLOSE POSITION. ALL UNUSED LEADS
FROM THE MONITOR SWITCH MUST BE INSULATED.
Common contact - Black
Normally Open contact (N.O.) - White
Normally Closed contact (N.C.) - Red
Maximum switching current - 0.1 Amps @ 125 VAC
EXAMPLE WIRING DIAGRAM WITH N.O. MONITORING
Black
4300
MONITOR
White
Red
Access
Control
System
X
Black = Common
White = N.O. contact (Dry)
Red = N.C. contact (Dry)
Unused wires must be cut
such that no exposed wire
will touch any metallic surface
Note: NOT intend to be a Rex switch.
Adams Rite Manufacturing Co.
260 Santa Fe Street,
Pomona, CA 91767
Phone: 909-632-2300
Fax: 909-632-2369
www.adamsrite.com
4300 SERIES ELECTRIFIED DEADLATCH
80-0180-421
Rev.
D
ECN: 11899
PRODUCT MUST BE INSTALLED
ACCORDING TO ALL APPLICABLE
BUILDING AND LIFE SAFETY CODES
INSTALLATION INSTRUCTIONS
Page of
2 2
Appvd: MP
Date: 03/16/12
Loading...