“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS+1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
DEADLOCKS
4070 Series Short
Throw Deadbolt
4070 SERIES SHORT THROW DEADBOLT
(PROJECTION STYLE)
Operation
180° turn of key or thumbturn projects or retracts the bolt.
Accepts any standard 1-5/32" mortise cylinder from either or
both sides. Cylinder must have special cam to fit (as shown).
DL-33
(Projection Style)
ALUMINUM
The 4070 Short Throw Deadbolt provides security for a
conventionally projected bolt in installations where the longthrow MS
offers the longest practical throw from a narrow stile.
Function
For installation where the long-throw MS® Deadlock cannot be
accommodated, the smaller 4070 offers the longest practical throw for a
conventionally projected bolt from a narrow stile. Operates with one-half key
turn of any standard mortise type cylinder or cylinder type thumbturn. This
product is not designed for use in bottom rail.
GRADE
E8212
®
Deadlock cannot be used. The smaller 4070
Specifications
CYLINDER BACKSET
• 7/8", 31/32", or 1-1/8" only.
CASE
• Steel with corrosion-resistant plating. 1" x 6" x depth. Depth
varies by backset.
BOLT
• 5/8" x 1-1/4" x 5/8" throw.
SPECIAL CYLINDER CAM
• 4070 Short Throw Deadbolts are operable by any standard
1-5/32" diameter mortise cylinder with special cam
dimensioned as shown. See CYLINDERS section for cylinder
make, thumbturn and trim ring information.
ARM-014-9/14
STRIKE
• In metal installations, a slot in door jamb serves as strike.
Deluxe trim strike 4170 is also available separately for
wood installations.
STA NDARD PACKAGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns available separately.
Shipping weight: 1/2 lb.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
DL-34
4070 SERIES SHORT THROW DEADBOLT
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
(PROJECTION STYLE)
DEADLOCKS
Dimensions Stile Preparation
STILE
HOW BACKSET
IS MEASURED:
CYLINDER
C
L
FLAT
RADIUS
1-7/8"
5-41/64"
143.3mm
47.6mm
C
L
C
L
27/32"
21.4
mm
BACKSET MEASURED
AT CENTERLINE OF
STILE NOSE
5/8"
15.9
mm
“A”
5/8"
15.9mm
7/32"
5.6mm
1"
25.4mm
BACKSET
1-1/4"
31.8mm
DIA.
4-3/8"
111.1mm
5-9/16"
141.3mm
1/4"
6.4mm
4170 Trim Strike
2-1/8"
1-1/2"
54mm
38.1mm
1/8"
1"
25.4mm
3.2mm
5-1/8"
130.2
5/8"
15.9mm
2-3/4"
69.8mm
mm
5-5/8"
142.9mm
C
BEVEL
BACKSET “A”
7/8"
22.2
31/32"
24.6
1-1/8"
28.6
ARMORED FACEPLATE
1-37/ 64"
mm
mm
1-25/32"
mm
1" X 5-5 /8"
FLAT 4070
RADIUS 4071
LH BEVEL 4 072-X5
RH BEVE L 4072-X6
40 .1
1-5/8"
41.3
45.2
mm
mm
mm
L
1-1/64"
25.8mm
5/32"
4mm
R TYP.
Lock & Cylinder Installation
CYLINDER
13/16"
20.6
mm
BOLT CUTOUT
IN STRIKE
HOW TO ORDER 4070 SERIES SHORT THROW DEADBOLT (PROJECTION STYLE)
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLAT E BACKSET HANDING FINISH
407 2 -2 6 -628
0 Flat 1 7/8" 5 LH or RHR 313 Dark Bronze Anodized
1 Radius 2 31/32" 6 RH or LHR 335 Black Anodized
2 Bevel 3 1-1/8" 0 Non-Handed* 628 Clear Anodized
*Any flat or radius faceplate. Specify 4170 Trim Strike if required.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Cylinders Accessories
4070 Short Throw Deadbolts are operable by any standard 1-5/32"
diameter mortise cylinder with special cam.
4170 trim strike for wood installations.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Loading...